Activated alumina is a versatile material with a wide range of applications. Here are some additional details:
## Production Process
1. Bauxite mining: Activated alumina is typically produced from bauxite, a type of rock that contains aluminum hydroxide.
2. Refining: The bauxite is refined to produce alumina (Al2O3).
3. Activation: The alumina is then activated through a process of heating and treating to increase its surface area and adsorption capacity.
## Properties
1. Surface area: Activated alumina has a high surface area, typically ranging from 200-400 m2/g.
2. Pore size: The pore size of activated alumina can vary depending on the application.
3. Chemical stability: Activated alumina is chemically stable and resistant to corrosion.
4. Thermal stability: Activated alumina is thermally stable and can withstand high temperatures.
## Applications
1. Air purification: Activated alumina is used in air purification systems to remove impurities and contaminants.
2. Water treatment: Activated alumina is used in water treatment systems to remove impurities and contaminants.
3. Gas separation: Activated alumina is used in gas separation applications, including the separation of oxygen and nitrogen.
4. Catalysis: Activated alumina is used as a catalyst or catalyst support in various chemical reactions.
## Benefits
1. High efficiency: Activated alumina is highly efficient in removing impurities and contaminants.
2. Long lifespan: Activated alumina has a long lifespan and can be reused multiple times.
3. Low maintenance: Activated alumina requires low maintenance and can be easily cleaned and regenerated.
4. Cost-effective: Activated alumina is a cost-effective solution for various applications.
## Industries
1. Chemical industry: Activated alumina is used in the chemical industry for various applications, including catalysis and adsorption.
2. Petroleum industry: Activated alumina is used in the petroleum industry for various applications, including gas separation and drying.
3. Pharmaceutical industry: Activated alumina is used in the pharmaceutical industry for various applications, including purification and filtration.
4. Water treatment industry: Activated alumina is used in the water treatment industry for various applications, including adsorption and filtration.
The appearance of your truck fleet is important to the overall image of your company. To keep your vehicles clean, having an automated truck wash system is the easiest way to keep them looking their best. When you perform an automated truck wash in the field, you can easily wash all the vehicles in your fleet as needed. You don't have to wait a long time to take them out of service to wash them. You can simply run them through the system as they become dusty or dirty.
Metal cutting fluid bactericide MBM is a slow-release bactericide with broad spectrum and high efficiency and a certain gas-phase sterilization ability. It is suitable for inhibiting the growth and reproduction of microorganisms in various humid environments, preventing the generation of putrefaction and foul odors, and ensuring safe operation of the system.
Sexual fungicide, the product has good solubility, suitable for oil and water based systems.
In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.
MBM is a new generation of broad spectrum and low toxicity developed for water-based metalworking fluids
Sexual fungicide, the product has good solubility, suitable for oil and water based systems.
In addition to the bactericidal effect, the product also has a certain anti-rust effect of black metal.
MBM is effective against both gram-negative and Gram-positive bacteria. MBM is effective against both gram-negative and Gram-positive bacteria.
Lithium hydroxide can be used as developing agent and lubricating oil for spectral analysis The additive of alkaline battery electrolyte can increase the electric capacity by 12 to 15 and increase the service life by 2 to 3 times
It can be used as an absorbent for carbon dioxide and can purify the air in submarines
The chemical equation is 2LiOHsCO2gLi2CO3sH2Ol
It is used to make lithium salt and lithiumbased grease electrolyte of alkaline battery absorption liquid of lithium bromide refrigerator etc used in petroleum chemical industry light industry nuclear industry etc When used in alkaline batteries the aluminum content is not more than 006 and the lead content is not more than 001 It is used as an analytical reagent a photographic developer and also in the manufacture of lithium it is used as a raw material for the preparation of lithium compounds It can also be used in metallurgy petroleum glass ceramics and other industries
Lithium hydroxide is mainly consumed for the production of lithium greases A popular lithium grease is lithium stearate which is a generalpurpose lubricating grease due to its high resistance to water and usefulness at both high and low temperatures
Carbon dioxide scrubbing
Lithium hydroxide is used in breathing gas purification systems for spacecraft submarines and rebreathers to remove carbon dioxide from exhaled gas by producing lithium carbonate and water
It is used as a heat transfer medium and as a storagebattery electrolyte It is also used in ceramics and some Portland cement formulations Lithium hydroxide isotopically enriched in lithium7 is used to alkalize the reactor coolant in pressurized water reactors for corrosion control
Product name: Flue Gas Desulfurization Pump
Model: Flue Gas Desulfurization Pump
Application: FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas
Product overview
Flue gas desulfurization pump Overview:
FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas desulfurization pump characteristics, absorb with similar products within and outside the advanced technology, well-developed The new generation of series desulfurization pumps. Dedicated to the absorption tower circulating pump PH: 2.5 to 13 chlorine ion concentration: ¹60000ppm weight concentration:¹60% Medium temperature: ¹100C.
Absorber circulation pump is large FGD key equipment, means there is high demand for its reliability and service life. FGD means more than half of the power consumed for driving the absorber circulation pump. Therefore, the circulating pump should have a high efficiency. Hydraulic design of the pump design and selection of materials flow components directly related to the efficiency of the pump operation, reliability and service life.
We developed the absorber circulation pump, pump, pump cover over-current parts are made of 2605N material, impeller, wear plate is used Cr30A material.
Hydraulic design of the pump, drawing the French company J S phase flow pump design and manufacturing technology, and the use of modern CAD, CFD technical correction.
Second, the flue gas desulfurization pumps structural features:
(1) The pump is single-stage single-suction centrifugal pumps, which form in practice has proved to be particularly suitable for FGD absorber circulation pumping device abrasive, corrosive slurry.
(2) The impeller, wear plate without using mouth ring seal in the form, set the port ring will be slurry rapid wear, leading to the rapid decline in the efficiency of the pump.
(3) having an axial adjustment structure, the impeller can be easily adjusted to maintain an axial gap between the impeller and the wear plate and the front cover, so as to maintain the high efficiency of the pump. It is always easiest to maintain and the most effective and efficient way to pump operation.
(4) is arranged in the form of pump is "pull" structure. This allows the pump impeller during disassembly, mechanical seals and shaft assembly without removing the inlet and outlet pipes.
(5) bearing with thin oil lubrication. Bearing mounted on a rubber ring secondary seal removable bearing box, to prevent dirt and water from entering.
(6) The shaft is a large diameter, short axis head can reduce shaft deflection at work, thus extending seal life.
Third, the flue gas desulfurization pump design advantages:
Overview: back pull-out design of the entire rotor assembly can be pulled from the motor, easy to maintain, the pump can remain in the pipeline, without removing the motor.
1. Front pull-out design wear plates, impellers, mechanical seal can be disassembled inlet end
2. bearing bracket can be adjusted to improve the wear resistance
3. The bearing lubrication oil immersion
4. Pump: pump pressure and wear of sufficient size, materials used 2605N, weldable, volute tongue wear some special treatment, tangential flow channel outlet, the body set foot supporting way.
5. Wear plates: the part is mounted between the pump and imported materials Cr30A, this material has excellent resistance to abrasion and erosion resistance, overall performance, thereby extending the life of the pump and impeller.
6. Impeller: material Cr30A, not welded, taking into account the long run is more economical, since the bearing holder can be adjusted when the situation abrasive wheel, the wheel can be re-processed and prolong life. Front blade structure prevents large particles rushed impeller and wear plate gap, the leading blade and wear plate gap, reducing the media (in impeller and wear plate) flow rate, reducing wear, special blades wear process design, back blade design, reduced axial force, but also to block large particles, high pressure bearing design (simulation without axial force hydraulic model back under the blade), the
7. impeller vent design, can be discharged within the gaseous medium, to prevent dry running mechanical seals.
8. After the pump cover: materials used 2605N, weldable, wear usually occurs in the back of the blade area, the pump head is mounted on the bearing bracket, release stress and allow greater wear and prolong the service life of the pump cover bolts fixed bearing frame for easy disassembly without the card and damage to the pump when dismantling the mechanical seal.
9. A bearing body: the bearing body consists of two parts, the carrier and the bearing housing, the bearing housing and the adjusting screw can be adjusted by means of bolts, move horizontally within the carriage. This has the advantage: in the bearing housing to move the carriage (reprocessing size according impeller), but the inner and outer bearing ring without relative displacement, since no relative displacement, seals fully functional. When removing the lower part of the reservation on the base for easy removal, position accuracy, the installation will not occur mutual jamming of parts.
10. Mechanical seal: The mechanical seal is designed to Single seal cartridge structure, easy disassembly. Wash design there are two options: one, loaded wash water pipe fixed wash water; of the two, without a fixed wash water line, segmental wash. In the mechanical seal the work area, if the medium containing gas, mechanical seals would run dry, so the impeller is designed with vents, you can avoid large, dirty particle contact mechanical seal. Easy emptying drainage pump seal cavity volume, full lubrication, cooling sufficiently.
Specifications:
Size: 5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cm
Weight: 11.5 oz. / 328 g
Temperature: -4 to 122F / -20 to 50C
Readily enables to communicate with Motorola MOTOTRBO
Description:
The Honeywell Max XT II is a rugged, handheld mobile computer that is designed for use in demanding environments such as warehouses and manufacturing facilities. It features a high-performance processor and a large, easy-to-read display, making it ideal for tasks such as barcode scanning and data collection. The device is built to withstand drops, bumps and exposure to extreme temperatures and is sealed against water and dust. With a long-lasting battery and the ability to run multiple applications simultaneously, the Max XT II is a reliable and efficient solution for mobile data collection and communication in industrial environments.
Benefits:
Monitors H2S, CO, O2 and combustibles.
One-button operation with robust, motorized pump.
Compatible with MicroDock II
Brand Honeywell
Total Weight 11 Kg
Model Number T8000
Alarm Activation 55+-5 Bar
Alarm Volume 90 dBA
Approve Temperatures 60 Degree Celsius
Apparatus Type Approvals EN 137:2006 Type 2
Filling Pressure 300 bar
Volume of Air 2040 Litre
Operating Temperature +60 Degree Celsius
The Honeywell T8000 Self-Contained Breathing Apparatus (SCBA) is a type of respiratory protective equipment designed to provide breathable air in a hazardous or contaminated environment. It consists of a backpack containing a compressed air cylinder, a regulator to control the flow of air, and a mask or hood that covers the user's face. The T8000 model features a lightweight and ergonomic design, a high-performance demand valve, and a user-friendly interface. It is typically used in industries such as firefighting, mining, and chemical processing, as well as by first responders in emergency situations.
Salisbury's Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly. Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or elbow test point. Each tester requires three C batteries (included).
Features & Benefits: Do not assume conductors that have been tested de-energized will stay de-energized. Always install proper grounding devices before working. Failure to do so may result in serious injury or death. Dimensions in. (mm): 11 x 3.5 ( 279.4 x 89 )
Instruments provide a wide range of best-in-class portable flue gas analyzers and VOC monitors. Ideal to monitor exhaust emissions like CO2, O2, N2, H2O, and VOC emissions.
