Material Steel
Use Industrial Gas
Pressure High
Place of Origin Zhejiang, China (Mainland)
Brand Name TE
Model Number WMA219-40-15
oxygen cylinder industry cylinder
Certification ISO and BV
steel gas cylinder gas cylinder
high pressure argon cylinder
Payment & Shipping Terms:
Price: Get Latest Price
Minimum Order Quantity: Negotiable Trial Order
Minimum Order Quantity: 300 Piece/Pieces 1 x 20FT ContainerTrial Order
Port: ningbo
Packaging Details: In loose bulk. Each piece covered with a plastic net bag. also according to customers request .
Delivery Time: 30 days after received L/C or T/T
Payment Terms: L/C,T/T
Supply Ability: 300000 Ton/Tons per Year.
We can supply only good conditioned LP Gas Cylinders
without gas, function checked by maintenance factory
Monthly over 10,000 cylinders can be supplied in four different size. 5kg, 10kg, 20kg and 50kg.
We load them in bulk onto 20' or 40' container in
FCL base.
1. Long-term heat preservation: high vacuum degree, low exhaust frequency, two years vacuum guarantee, better than competitors.
2. High Safety: There is no leakage while using. It is not dangerous when being baked in the fire for 40 mins, dropping down from 10 m height, hit by 100 km/h. The gas cylinder frame fit the special installation requirements of the LNG
automobiles and adapt to any complex conditions.
3. High stability: The gas cylinder output pressure in the gas supply system and matching degree of the valves is more stable.
Applicable models of LNG cylinder,
Main engine factory: The range of applied vehicles is tractor, bus, dump truck, flatbed truck, etc.; the volume of gas cylinders is 350L-530L, all of which are small; Side mount.
Modification plant: The application range is relatively wide, mainly tractors and mining trucks, which have formed batches; other dump trucks, high-speed tractors, mobile power generation equipment, marine use, etc. are all involved, which are verified by tests
ISO9809-3 150bar 37MN TUV TPED Oxygen Tanks Gas Cylinders
1 Minimum order quantity: 100 only
2 Use cylinders:Our seamless steel cylinders are widely used in industry, medical devices, fire fighting and scientific research
Oxygen gas cylinders
During the blanking process of gas cylinder production, the inner and outer surface and end face of the steel pipe shall be checked one by one, and the inner and outer surface of the billet shall not have cracks, serious pits, folds, folds, layers apart and scarring. The end face is smooth, no obvious burr, the inner and outer surface is clean, no feeding iron and debris, and check the perpendicularity and perpendicularity of the cylinder body one by one.
This document (EN ISO 9809-3:2010) has been prepared by Technical Committee ISO/TC 58 Gas cylinders in collaboration with Technical Committee CEN/TC 23 Transportable gas cylinders, the secretariat of which is held by BSI
TUV gas cylinders
Interpretation of test results The interpretation of the burst test results shall involve:
a) examination of the pressure/time curve or pressure/volume of water used curve, to permit determination of the pressure, py, at which plastic deformation of the cylinder commences, together with the bursting pressure ph;
b) examination of the burst tear and of the shape of its edges.
150bar gas cylinders
Product Information:
10.8 litres to 80 litres; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 or GB/T5099.3 production standards;
2The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L)
3Aliases: Oxygen gas cylinders; Germany Rhein gas cylinder; 150 bar cylinder; Oxygen bomb; Gas cylinders
4A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies:
a) the nominal outside diameter has been changed;
b) the guaranteed minimum thickness has been changed;
c) the hydraulic test pressure, ph, has been increased (where a cylinder is to be used for lower pressure duty than that for which design approval has been given, it shall not be deemed to be a new design);
d) the guaranteed minimum yield strength, Reg and/or the guaranteed minimum tensile strength, Rmg, have changed.
Oxygen gas cylinders
We export cylinders to southeast asian, the middle east, africa and europe, etc. The total output and sales in our local market reach 5million pcs every year.So believe our quality and capacity.
