The cement is the most demanding and essential raw material used in various production and construction activities. The cement industry has witnessed a steady growth in the market as different range of products using cement are manufactured. It is a binder, a raw material substance that serves as an adhesive to other materials. Cement mixed with water and fine aggregate produces mortar, sand and gravel to create concrete. It is the most-consumed resource and is widely available in the market. * Portland Cement is the most common type of cement used for concrete, and stucco. Types Of Cement We offer include: Ordinary Portland Cement Portland Pozzalana Cement White Cement Portland.
Origin :- Vietnam . Turkey
Cement Clinker - High Quality Export Grade
Product Detailed Description by Trade Rock for Trading and Mining
Product Name:
Cement Clinker
Origin:
Egypt
Producer & Exporter:
Trade Rock for Trading and Mining
Product Description:
Cement Clinker is the primary component in the production of Portland cement. It is produced by sintering
limestone, clay, and other raw materials in high-temperature kilns. Trade Rock supplies high-quality clinker
that meets international standards for use in bulk cement production, ready-mix concrete plants, and
construction projects across the globe.
Key Specifications:
- Type: ASTM C-150 Type I or EN 197-1 CEM I 42.5N/52.5N
- L.O.I (Loss on Ignition): <= 3%
- Free Lime (f-CaO): <= 1.5%
- MgO: <= 5.0%
- SO3: <= 2.5%
- Al2O3: 4%-8%
- SiO2: 20%-22%
- Fe2O3: 2%-5%
- Tricalcium Silicate (C3S): >= 45%
- Color: Grey
- Form: Nodular (5-25 mm)
Applications:
- Grinding into cement in milling plants
- Blended cement manufacturing
- Infrastructure and civil construction
- Export to cement factories and distributors
Competitive Advantages:
- Consistent chemical composition and low moisture
- High early and final strength potential
- Complies with ASTM, BS EN, and international standards
- Efficient logistics from Egyptian ports
Logistics & Delivery:
- FOB Port: Alexandria, Damietta, or Sokhna, Egypt
- Minimum Order Quantity: 5,000 MT
- Monthly Supply Capacity: 100,000+ MT
- Delivery Time: 10-20 days depending on destination
Compliance & Certification:
- ISO 9001:2015 Certified
- SGS, Bureau Veritas, or Intertek inspection available
- Conforms to ASTM C-150 / EN 197-1 standards
Storage & Handling:
- Store in dry areas, protected from moisture
- Handle with mechanical loaders or conveyors
- Avoid exposure to rain and high humidity
Crown Portland Composite Cement is CEM-II/A-M which is a cement consisting of Clinker, Gypsum, Pulverized Fuel Ash (PFA), Blast Furnance Slag and Limestone designated by the specifications of BDS EN 197-1: 2003; CEM -II/A-M (V-S-L), 42.5 N. PCC is the most suitable cement for constructions in Bangladesh. CEM â?? II /A-M contains 80-94% Clinker, which is substantially higher than CEM â?? II/B-M containing 65 â?? 79% Clinker that provide us extra advantage in strength development and increase concrete performance.
Both slag & fly ash (PFA) are used in PCC. Percentage of SiO2 in PFA is higher than slag which is advantageous to gain more long-term strength and ensure durable concrete. This type of cement is used for large constructions all around the world and it has been used during the last few decades.
The hydration process of normal cement produces Calcium Silicate Hydrate CHS & Calcium Hydroxide Ca(OH)2. Calcium Hydroxide Ca(OH)2 does not contribute to gain strength and it is the weak part of reaction which is not suitable for concrete. Since PFA contains higher portion of reactive silica and slag contains alumina, it helps to convert Ca(OH)2 into CSH to gain further strength.
INCEPTION: G- GROUT MF-8 is highly fluid, single component, cementitious grout pre packed .
G-GROUT MF-8 powder It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks, pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.
PURPOSE: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. �·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water
BENEFITS: G-GROUT MF-8 can be injected with standard cement grouting equipment
Compatible with most of the admixtures to accelerate / retard the setting time
Supports all portions of structures
Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
Non-toxic, Non-Hazards
Eco friendly & Cost Effective.
TECHNICAL SPECIFICATION
METHODS OF USES: Pre-process-
The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
Mixing:
MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes. Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
PACKAGING G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
STORAGE G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25C, protected from heat, frost and direct sunlight. SAFETY INFORMATION Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice
92% Ferro Silica Fume meets the creteria of most of the relevent international and Indian Standard specification. Its packed in 25 kg bags & Big 1 mt Jumbo Bags from Ahmedabad, Gujarat. Microsilica is a highly reactive pozzolan and gives concrete a denser microstructure, lower permeability higher electrical resistivity leading to improved durability.
Combined with correct design and workmanship, microsilica concrete offers characteristics that will ensure long term durability and service life. It durability of a reinforced concrete structure can be defined as the capability of the structure to maintain its original functional and structural characteristics during the expected service life in the exposure conditions it was intended for.
G-FINE ULTRAFINE is a new generation Supplementary Cementitious material (SCM) with a built-in high tech content. It is processed based on high glass content with high reactivity obtained through the process of controlled granulation process results in unique particle size distribution. The raw materials are composed primarily of low calcium silicate based mineral additives.
Its latent hydraulic property and pozzolanic reactivity results in an enhanced hydration process. Addition of G-FINE improves the packing density of the paste component. In spite of its high fineness the results are in lowering water demand, admixture dosage and hence improving strength and durability parameters of concrete at all ages.
G-FINETM are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as other pozzolanic materials.
Application
Roads, Residential, Commercial structures
Producing mass concrete for raft and pile foundations
Low water to binder rations for high performance concrete
Better retention of workability and faster initial strength gain
High Strength construction work in low or high temperature weather
Benefits
Increase compressive strength ,permeability, workability of concrete
Improves the durability of concrete
It can be used in waterproofing as an additive
It can decrease the heat of hydration
Resistance against saltwater & chemicals
Non-Toxic, Eco friendly
Cost effective, economical solution DOSAGE These goals are accomplished using cement pastes, mortars, and concretes with water-Cementitious material ratios ranging from dosage: 5% to 10% .The segregation of cement paste is caused by high super plasticizer dosages that do not cause segregation of concrete with the same water-Cementitious material ratio. Concrete containing G-FINETMas a partial replacement for cement exhibits an increased compressive strength because of the improved strength of its cement paste constituent. Changes in the paste-aggregate interface caused by silica fume appear to have little effect on the uniaxial compressive strength of concrete
PACKAGINGS G-FINE shall be packed and supplied in 25 Kg plastic bags/Customized packing is done if required in G-Fine brand. It is also available in Bulk Jumbo bags. STORAGE G-FINE when stored correctly has an indefinite shelf life. Like cement,G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.SAFETY INFORMATION / DECLARATION
Extensive testing has shown G-FINE to be non-toxic and environmentally friendly. No known significant health risks are associated with G-FINE but high concentrations of dust may cause irritation. It is recommended that suitable Protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice. The following information has been obtained from test results in an accredited l
