It has the function of segmented charging and discharging.
Backflow prevention and grid connection function.
Insulation resistance and leakage current detection function.
Working without battery under special conditions.
Lithium battery activation function, which can be triggered by mains or PV.
Power saving mode, reduce no-load loss.
.Four charging modes: PV Only, Mains Priority, PV Priority and PV&Mains hybrid charging.
Two output modes: mains bypass and inverter output, with UPS function.
360 all-round protection.
Allow lead-acid battery and lithium battery access.
ON/OFF switch controls the inverter AC output
Grid-connected mode can be set.
Design characteristics:
Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output.
Advanced MPPT technology with efficiency of 99.9.
LCD screen and three LED indicator lights can clearly indicate the status and data.
Intelligent and variable-speed fan, efficiently dissipate heat and extend system life.
Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.
type: hybrid inverter
AC input:120Vac~230VAC
DC input: 120V ~450Vdc
DC output: 48Vdc
Power Output: 5.5KVA
rated power output: 5KW
power efficiency: >95%
compatible solar panels: 4pcs of 535w mono solar panel
Introduction:
The HES series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally.
Advantage:
ï?¬ Efficient
Advanced MPPT technology with up to 99.9% efficiency
Up to 22A PV input current perfect for high power
ï?¬ Reliable
Outputs high quality pure sine wave AC power
8-10kW load power to meet the needs of most
ï?¬ User-friendly
Industrial design with a modern aesthetic look
Easy to install and simple to use
ï?¬ Safety
360 degrees of security from hardware to software
EU and North American safety approvals
ï?¬ All-in-one
Solar Charger Controller up to 100A charging current
Support for Li-ion battery BMS communication
ï?¬ Intelligent
Exclusive Li-ion battery BMS dual activation
Time-slot function to save cost with peak-valley tariff
Essential details
Place of Origin: China
Model Number: SR-HES4855S100-H
Input Voltage: 500vdc
Output Voltage: 230Vac
Output Current: 100A
Output Frequency: 50Hz/ 60Hz
Output Type: Single
Size: 556MM*345MM*182MM
Type: DC/AC Inverters
Inverter Efficiency: 95%
Certificate: CE/RHOS/IEC
Warranty: 5 years
Weight: 20kg
Inverter type: On-grid and off-grid Solar Inverter
Rated power: 5500w
Protection: IP65
MPPT Efficiency: 98-99%
Display: LCD
Communication: WIFI / RS485
Battery type: Lead Acid \ Lithium \ Gel
Battery Voltage: 48 VDC
Peak power: 11000W
Color: White+Black
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, TV, electric fans and other industrial power supply.
Technical Features:
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control.
6, The output voltage can be set between -40 % to +20 % of rated voltage.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.
Product name MPPT Hybrid Inverter for Solar Energy System
Model No. HF4850S80-H
Output Voltage 220/230/240 Vac
Output Frequency 50Hz/ 60Hz
Inverter Efficiency >95%
Warranty 14 months
Brand Name SRNE
Output voltage waveform Pure sine wave
Certificate CE(IEC/EN62109-1,-2),ROHS2.0
Rated power 5000w
Color White
AC charge current 60A
PV charge current 80A
Wifi function support
Maximum PV open circuit voltage 500V
Battery type Lead acid or lithium battery
Weight 13kg
Features:
1. Full digital voltage and current double closed-loop control, advanced SPWM technology, the output
of pure sine wave.
2. Two output modes: mains bypass and inverter output; uninterrupted power supply.
3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid
charging.
4. Advanced MPPT technology with an efficiency of 99.9%.
5. Designed with an LCD screen and 3 LED indicators for a dynamic display of system data and operating status.
6. ON/OFF rocker switch for AC output control.
7. Power saving mode available to reduce no-load loss.
8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9. Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
10. 360 �° all-round protection with a number of protection functions.
11. Complete protections, including short circuit protection, over-voltage and under-voltage
protection, overload protection, reverse protection, etc.
Essential details
Warranty: 18 months
Free installation service: NO
Model Number: HFP4850S80-145
Application: Home, Business
Solar Panel Type: Monocrystalline Silicon, Polycrystalline Silicon
Battery Type: Lead-Acid, Lithium Ion
Controller Type: MPPT
Mounting Type: Ground Mounting
Load Power (W): 3KW, 6KW, 5kW, 10KW, Others
Output Voltage (V): 100V 110V 120V
Output Frequency: 50/60hz
Work Time (h): 24 hours
Certificate: CE RoHS,cETL,UL
Pre-sales project design: N
Battery: Lead Acid/LiFePO4 Lithium Battery
Type: Off-grid System
Keyword: mppt inverter
Output wave: Pure Shine Wave
Color: White
Inverter: Hybrid Inverter
AC output: 110/120/220Vac-240Vac
System Type: Off-grid Solar PV System
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance.
2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection.
3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair.
4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set.
5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control.
6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load.
9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.
10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy.
11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%.
12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
13, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
Off grid
Rated power: 1000W
Dimension(W/H/D): 225*355*92mm
Net weight: 5kgs
LCD display
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is
150~430Vdc, which Can help customers make full use of solar energy.
Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
Support parallel operation up to 3 units (available for 3KW-5KW 48V)
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
