Type - Other Watering & Irrigation
Model Number - IR161020-2
Material - Plastic
Diameter - 16 MM
Wall thickness - 1,0 MM
Flow rate - 2 lph
Packaging - 400 meter
Dripper spacing - 20 CM
Turbine flowmeter can be divided according to function name gas flow meter,flue gas meter,steam flow meter,gas flow meter,compressed air flow meter,liquid flow meter.
LWG type turbine flow sensor and receiving electrical signals of the display instrument of turbine flowmeter, which is used to measure low and medium viscosity closed pipes
Degree of fluid (liquid or gas), the total volume flow and in petroleum, chemical industry, metallurgy, aviation and scientific research departments for a wide range of applications.
Sensor is composed of turbine sensor components and amplifier, the structure of the two together for one-piece: to measure the structure of the positive and negative flow
For two-way type; With inserted rod can be installed in the large diameter pipe flow body flow structure for a plug-in.
Based on the principle of moment balance sensor work. When the fluid flows through the sensor, promote the impeller rotation, when the flow rate must be dynamic torque
Maintain and drag torque balance, the impeller speed. Evenly distributed on the permeability of the impeller blade with the impeller rotation, to periodically change detection
The reluctance of the magnetic field sensor (coil), electrical pulse signal detector, after the amplifier amplification output. The output electric pulse frequency and impeller speed
Is proportional to the impeller speed is proportional to the flow in, so the output electric pulse frequency is proportional to the flow sensor flow, 4-20 ma signal is converted is proportional to the flow.
Aliava avf250 series is a common used various flow meter in auto-industry process control. It's with small volume, wide range and easily operation.
It could also measure liquid, gas and steam flow rate, especially fit for small flow rate application.
Features
4 digit flow rate & 8 digit totalizer
Local indication without auxiliary power
4-20 ma & scale pulse output
Low pressure lost on gas and steam application
Damper for gas/steam application
Consistent overall length
Heating jacket design
Intrinsically safe & explosion proof for hazardous area
For all industrial process applications
From cost-effective mechanical indicators to very advanced flow instrumentation
Maintenance and service tools, flow computers and other accessories for flow measurement
The electromagnetic flow meter HMF 2110 series is the most common and highly accurate flow measurement device that can be universally used in various measurement fields. Since there is no driving part like a propeller, no trouble is caused due to pressure loss, and the durability is excellent In addition, since the installation is simple with the flange type, even a beginner can easily install it through simple training. The sensor measures the flow rate by direct contact with the fluid,, thus a more reliable flow rate value can be obtained, and the reproducibility is also excellent If you are looking for a flowmeter that can be used with confidence, choose the HMF 2110 series without hesitation.
â?? KEY FEATURES
Quick Start
Self diagnostic
Easy Maintenance
â?? CHARACTERISTICS
â?¢ Due to high stability, popular for water flow measurement
â?¢ Excellent durability due to no driving part
â?¢ Electrode and lining materials are selected for measuring chemical flow
â?¢ There is no pressure drop, which reduces electricity costs.
â?? SPECIFICATIONS
* Sensor installation method : Flange mounting type (Standard: JIS, DIN, ANSI, etc.)
* Accuracy : �±0.2% (flow rate 0.1 m/s or more)0.2% (flow rate 0.1 m/s or more)
* Max Minimum Flow : 0.05 m/s ~ 10 m/s (Flow rate by diameter)
* Measuring pipe caliber : 6 mm ~ 2,000 mm
* Measurable fluid : Water, sewage, wastewater, chemicals, etc. (Conductivity of 5�¼S /cm or more)
* Power : 110 ~ 220 V AC / 60 Hz
* Operating temperature : Sensor (40 ~ 70 â??), Operation: (18 ~ 60 â??)
* Screen display contents : LCD Size: LCD Display 100 x 55, 3 Line, 16 Characters, Instantaneous flow rate (4 digit), accumulated flow rate (9 digit), pressure (4 digit)
* Flow display unit : Unit: m3, L, etc. / Directions: Forward & Reverse (-)
* Electrode : Hastelloy C
* Liner: NBR, Hard Rubber, EPDM
* Flange : Carbon Steel
* Flow measurement frequency : 1.875 ~ 12.5 Hz
* Sensor cable length : 100m
* Output signal : 4 ~ 20 mA, Integrated pulse active , Passive (Max 10 kHz), Relay pulse (Max Load 24 V DC / 1A)
* Communication and memory : RS 232, RS 485 Modbus 128 Mbyte internal memory: date, time, instantaneous flow rate, accumulated flow rate, Pressure memory interval: 5 seconds ~ 24 hours
* Protection class : Sensor unit: IP 68 / Operation unit: IP 65
* Self diagnosis function : Alarm display when empty pipe information and self diagnosis error occur
For more details on quality Korean flowmeters, please feel free to visit http://www.hnl-global.com/flowmeter and contact us.
Low flow flowmeter(mini oil water flow meter) principle is a liquid pushing one pair of oval gears; volume of each cavity is a fixed volume; gear speed leads, the sensor sends the sync pulse count, oval gear rotated by the magnetic seal coupling and reduction gear mechanism passed directly to the counter indicates the total flow through the meter. If the additional transmission means, the display together with electrical instrument can achieve remote only instantaneous flow or accumulated flow.
The low flow flowmeter with 0.2% accuracy and low flow range.the high temperature is 200C,the max pressure is 1000Bar.the output is pulse and material is stainless steel and aluminum.
Model Flow range Connection
CX-M2-SS/AL 0.5~150 ml/min G1/8 female thread
CX-M3-SS/AL 1-300 ml/min G1/8 female thread
CX-M5-SS/AL 5-1000 ml/min G1/8 female thread
CX-M6-SS/AL 0.5-100 l/H G1/4 female thread
CX-M9-SS/AL 5-550 l/H G1/4 female thread
CX-M12-SS/AL 1~30 L/min G1/2 female thread
CX-M25-SS/AL 5-110 l/min G1 female thread
CX-M40-SS/AL 10-250L/min G1 1/2 female thread
CX-M50-SS/AL 10-500L/min G2 female thread
select the low flow flowmeter and jsn WE will provide the professional service for you.
Description - "it Is A Flowmeter For Measuring Fluid Flow Rates In An Enclosed Conduit.
It Has The Karman's Vortex That Is Proportioned To The Velocity Of Fluid In The Down Stream Of Trigonal Prism (delta Body). "
Origin - Korea
Size - 15a ~ 300a
"packaging Details
(w*d*h)/mm" - 500*300*200
Weight(kg) - 3 ~ 20
FOB ($) - " Retail Price
+ (Shipping Cost) "
MOQ - 1set
NOTE - All the product information may be changed depending on the specification.
[ CHARACTERISTICS ]
¶Wide Beam Transducer (Broadband ultrasonic measurement function)
?¢ Determine the transmission frequency by finding the resonance frequency of the pipe
according to the outer diameter, material, and thickness of the pipe
â?¢ Little error occurs due to stable signal reception
â?¢ Excellent measurement stability even when there are air bubbles slurry (30% or less),
scale generation, changing temperature and density. How to install
â?¶Pipe Configuration (automatic correction of disturbance factors)
â?¢ In actual industrial sites, sufficient straight pipe without interference is required for
accurate flow measurement
â?¢ If no sufficient straight pipe is secured ;
* HUF 2000N / HUF 2000DN (Compensation Type Ultrasonic Flow Meter)
- Re estimation of correction factors for disturbance factors and distances from
disturbance factors, self compensation.
- It has the same accuracy as that in which a sufficient intuition is secured even at
a short distance from the disturbance factor.
â?¶Other Functions
* Diagnostic Menu (Self diagnosis function)
The attenuation degree, correlation degree, and noise degree of the ultrasonic received
signal can be known and quantified to display empty pipe information, strength of the
received signal, bubble content, S/N ratio, etc.
* Auto Zero (Automatic zero adjustment function)
In the first installation, zero point can be automatically adjusted without stopping the
flow. Periodic automatic zeroing can prevent zero deformation caused by other factors.
* MultiPulse Transmission (Multi pulse function)
The pulse signal to analyze the time difference waveform transmit 50 pulse signals per
measurement cycle, thus it has excellent measurement sensitivity and stability of
ultrasonic signals.
* Liquid Class Menu (Fluid selection function)
A list of about 30 types of fluids is provided. When selecting fluids, the expected
ultrasonic velocity (m / s), viscosity ( cS ), density (SG), and data are automatically
entered and the pipe temperature range can be selected. Pipe Data Menu (Pipe
selection function With more than 40 types of standard pipes and custom pipes built in,
you can enter pipe outer diameter, material, and thickness using a list of pipe class and
size options.
