The high quality arunachal coal is suitable for coke plants and steel industry apart from brick kilns, cement industry etc. The average analysis figures of all the available coal are: ash 5-10%, volatile matter 38 to 42%, moisture 1.8 to 2.5%, and sulphur 2 to 3.59%. The sulphur is both of organic and inorganic origin. The coal has extremely low phosphorus (0.001-0.008%). It is a highly caking coal, the caking index varying from 17 to 24 (b.S.S.). The swelling index varies from 2.5 to 4 and the calorific value is as high as 11, 970 to 13, 410 b.Th u./1b.
High Carbon, Low Moisture & Low Volatile Anthracite Coal.
Origin:USA
We can supply 50k - 60K MT Per Month on FOB basis.
Typical Quality:
Vol. (Dry). 4.5 to 6%
Ash (Dry). 9.5 to 11%
Fixed Carbon 82.5 to 86%
Sulfur (Dry). 0.75%
BTU /lb. (Dry) 13,600
Moisture (AR). 0.3%
Size: 4.75 to 89 mm .
If interested in Anthracite coal ,please advise to buyer size requirements and we shall follow up with more information along with COA.
Sub Bituminious Coal / Non-Coking Coal / Thermal Coal / Steam Coal Product origin East Kalimantan Indonesia.
Commodity: Indonesia Steam Coal in Bulk
Mine Origin: East Kalimantan,Indonesia.
Loading Port: Jetty Kariangau Terminal East Kalimantan, Indonesia
Port of Discharge: Muara Berau Anchorage, East Kalimantan
Pricing: FOB Barge
Sub Bituminious Coal / Non-Coking Coal / Thermal Coal / Steam Coal Product origin East Kalimantan Indonesia.
Commodity: Indonesia Steam Coal in Bulk
Mine Origin: East Kalimantan,Indonesia.
Loading Port: Jetty Kariangau Terminal East Kalimantan, Indonesia
Port of Discharge: Muara Berau Anchorage, East Kalimantan
Coal mine for sale. The reserve is comprised of an estimated 70 million tons of in ground semi-anthracite coal, under just over 10,000 acres, bordered on the north by the Arkansas River This is probably the largest known mine in the U.S. and it has never been mined. Because of semi-anthracite's high fixed carbon content, elsewhere it has found its greatest use for Pulverized Coal Injection (PCI) in which the coal is injected into a blast furnace to substitute for a portion of the significantly more expensive coke. The expected average assay of the coal is as follows: 1) Ash: 6 to 9%; 2) Moisture: 60. With conventional preparation, this coal should be acceptable in the PCI market. If, however, this coal is processed through a special proprietary refinery, the assay of the coal is projected to be as follows (with a strong tendency to be the better number in each case): 1) Ash: 2.2 to 7.6%; 2) Moisture: 1 to 3%; 3) Volatile Matter: 9 to 11%; 4) Sulfur: 0.6 to 0.8% 5) Heating Value: 12,500 to 13,500 BTU/lb; 6) Fixed Carbon 80 to 90%; 7)