Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Product Tech
SMS Medical Nonwoven Fabric
Composition
100% PP
Weight Range
10gsm-100gsm
Workable Width
Between 100 and 3,100mm
Roll Diameter
Between 800 and 1,500 mm
Core Dia
76 mm
Color Option
White
Applications
Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital
Feature
1. Low-linting
2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind
3. Excellent wet and dry strength
4. Highly absorbent and quick drying
5. Hygienic - Cleans without scattering dust particles
6. Solvent-resistant
7. No binders,chemicals or adhesives
8. Both sides of the non-woven fabric sheet can be used
Packaging
Shrink PE Film and Cardboard on Both Side.
40HQ can load around 8.5 ton,
20GP can load around 3.5 ton
Certifications
ISO9001:2000, GMPC, SGS
Production Lead
20-40 days after receiving the deposit and confirming the samples
Payment Terms
30%T/T Deposit, Balance Against B/L Copy
OEM Service
Yes
The basic component of every garment product is textile, which is made of different kind of material. textile material quality varies according to the properties of material used to syntactic the fiber. In the next few paragraphs I will explain about some properties of fiber constituting material which are used for synthesis different kinds of fibers and these properties of materials have a substantial effect on fiber quality
Price of product - depends on the product requirement
Product origin - INDONESIA
Harmonization System (HS) Code : 0709
Minimum Order Size : + 500 kgs
Packaging details: Robust packing as per international standards
We provide good quality stock fabric materials to customers around the world. Our China`s factory can supply stock textile fabric raw materials and can pack any weight per bale based on customer`s requirement. We also have excellent shipping and logistics infrastructure to ensure a first-class and reliable service. We provide a guarantee with all our shipments and if any bad item has been packed by mistake, we will replace it free of charge with your next order. We work hard to satisfy our customers' demands and to help your business to grow. Your success is our success.
