Submersible water pumps for mining, deep well pump, centrifugal pump, stainless steel pump
Model: 200QJ20-30/2
Flow: 20m3/h
Head: 30m
Power: 3kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Submersible water pumps , deep well pump, centrifugal pump, stainless steel pump
Model: 200QJ63-28/2
Flow: 63m3/h
Head: 28m
Power: 7.5kw
Material:Cast iron/stainless steel
Impeller material:Cast Iron/stainless steel
Pressure:Low Pressure
Warranty:12 Months
Color:Blue
Place of Origin: ,China (Mainland)
Deep well submersible water pump Overview:
deep well submersible water pump is widely used in various kinds of water conservancy facilities such as farm irrigation, sprinkler irrigation with water, the supply and drainage system of civil building and, industrial and draining water from the hills and mountainous area, the diversion in low-lying areas, water supply and drainage in urban and rural industrial and mining enterprises etc.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump structure&model meaning
1. Submersible electric pump is composed of five parts: water pump, submersible motor, water line, waterproof cable and control switch. Water pump belongs to single suction multistage vertical centrifugal pump.
2. Submersible motor adopts water-filled wet structure, internal chamber was filled with water for cooling the motor and lubricating the bearing. In the operation, due to the changes of temperature, the pressure of the filled water in the internal chamber also changes, it can be automatically regulated by pressure-regulating unit in the lower part of motor.
3. For preventing the sand getting into the motor, the sand-preventing unit including sand and skeleton oil-sealed was installed in the upper part of motor, the whole motor was sealed tightly.
4. There are water injection hole and exhaust hole in the upper part of the motor and discharge hole in the lower part.
5. There are thrust bearing and thrust collar, mainly for sustaining remnant axial force of pump and the empty weight of motor's rotor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Deep well submersible water pump spare parts &features:
Deep well submersible water pump motor and pump assembled into one.
Deep well submersible water pump has simple structure, easy to use and maintenance.
Electric motor is three-phase asynchronous motor.
http://www.dragonpump.com/products/qj-deep-well-submersible-pump/
Product overview:
The series submersible sewage pump is mainly used for industry,agricultural,fishery,mine drainage,building construction, municipal environmental protection and tunnel construction etc. Trades to drain off soild particles with short fiber, confetti,sediment and so on. Or drain off software solids liquids. Such as mud,grey water, life wastewater, sewage and so on. The series submersible pump is the ideal equipment for agricultural irrigation,raising livestock and poultry manure pit,cleaning the silt of pool and construction site.
Usage:
Used for discharging waste water and other material with granular material, also it can be used for clean water and corrosive medium.
Conditions of using:
1.The medium temperature should not be over 40oC ,PH:4-10.
2.The solid volume ratio of the medium should not be over 2%.
3.The kinematic viscosity of medium between 7*10-7m2/s---23*10-6 m2/s.
4.The density of the medium is 1.2*10 3kg/m3.
5.Centered on the impeller,underwater not more than 5m.
Scope of application:
1. For discharging polluted waste water of factories and industries;
2. sewage discharge station of living quarters;
3. drainage system of municipal sewage treatment plant
4. drainage station of fire fighting system
5. waterworks equipment of running water factory
6. sewage discharge of hospitals and hotels
7. construction site of municipal engineering
8. matched equipment of exploration mine
9. country biogas digester
10.farm irrigation
11. other industries
Model: 3fls1.8/100-d24/270
Max flow: 1.8m3/h
Max head: 100m
Voltage: dc 24v
Power: 270w
Outlet dia/pump dia: 0.75inch/3inch
Packing: packed by carton box
Submersible Adjustable Water Pump Aquarium Hydroponic Fountain
Model no.: MY-016 to 6800
Voltage range : 110/220/240
Max load current : 4.0 a
Max static lift : 5.5m
Max flow : 6500 l/h
Rate power consumption : 2-138W
ADVANTAGE OF DC SOLAR PUMP
1 Permanent magnet DC brushless synchronous motor:The efficiency is improved by 15%-20%; Save energy;Reduce the consumption of solar panels.
2 Brass or stainless steel outlet/connector/oil cylinder.
3 Japanese NSK bearing:prolong the working life.
4 Alloy mechanical seal:Longer working life and high reliability.
5 Motor coil is made by automatic winding machine with centralized winding technology, motor efficiency is much improved.
6 The pump parts are processed by high-precision and fully automatic machines,strictly controlling the dimension precision and smoothness.
7 Intelligent water shortage and full water protection.
8 DC Controller:
(1)Waterproof grade:IP65
(2)Ambient temperature:-15~60
(3)MPPT function,the solar power utilization rate is higher.
(4)Automatic charging function:Guarantee the pump normally working, meanwhile charge the battery;And when there is no sunshine,the battery can make the pump continuously work
(5)LED displays the power,voltage,current,speed etc working condition and error code.
(6)Frequency conversion function:It can automatically run with frequency conversion according to the solar power,and user also can change the speed of pump manually.
(7)Automatically start and stop working.
(8)Water proof and leak-proof:Double seal effect.
(9)Soft start:No impulse current,protect the pump motor.
(10)High voltage/Low voltage/Over-current/High temperature protection
Model: 3fls1.8/100-d24/270
Max flow: 1.8m3/h
Max head: 100m
Voltage: dc 24v
Power: 270w
Outlet dia/pump dia: 0.75inch/3inch
Packing: packed by carton box
Mini-dc5l120y007s
Specifications
Note: a small sluice gate on the side
2 kind of output water pipes
3pieces of holding suckers
Input voltage: 5v dc
Power: 1w
H.Max.: 0.7m
Q.Max.: 120l/h
Size: 43*38*30mm
Wire length: 100cm
Output water pipes dimension:
1.Outside diameter: 8.5mm
2.N.W.: 0.11kg
Operating Condition:
Fluid temperature up to 35 Centigrade
Maximum ambient temperature 40 Centigrade.
Maximun particale: 30mm for dirty water type
Maximun particale: 5mm for clean water type
Structural Charactristics:
* External float switch for automatic pump operation.
* Pump body made from fiber glass reinforced technopolymer, particularly to mechanical stress, knocks and corrosion, or stainless steel pump body.
* Technopolymer open impeller.
* Suction strainer made from fiber glass reinforced technopolymer, providing the support base for the pump.
* Technopolymer hose joint with screw fitting.
* C45 steel motor shaft.
* Double seal carbon/aluminum on the pump side and sealing ring on the motor side.
* Sealed induction motor, suitable for continuous duty with built-in thermal cutout relay (motor protector).
* Insulation Class B (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself)
* Protection rating IP 68
* "H05/07 RN-F" Neoprene submersible supply cable.
* Supplied standard with 10 meters of cable and plug.
* Voltage and frequency available on request.
* 220V/50Hz, 220V/60Hz, single phase
* copper wire stator with thermal protector
Insulation class B,
Protection IP44,
Continuous duty .
For submersible pumps, we have Water Submersible Pumps, Submersible Pumps, Fountain Pumps, Centrifugal Pumps.
We cover a wide range of products across all industries. However, we do have benchmark industries, including automotive, CNC machinery, hardware accessories and tools, raw materials, and more.
Feel free to send RFQ about these with details :
1. Product name, specs, qty, usage.
2. Special inquiries (Ie. Machining, customization) must include drawing or 3D files.
3. Estimated price/target price:
3. Buyer name :
Company name (if any) :
Email address :
Phone number :
