Xsf Paper

Mitsubishi MG400 Motor Grader Specifications
Main Specifications
Blade Width: 3710mm (standard blade width)
Steering System: ATC
Weight & Loads
Operating Weight: 13,100kg
Front Axle Load: 3,700kg
Rear Axle Load: 9,400kg
Dimensions
Overall Length: 8490mm
Overall Width: 2400mm
Overall Height: 3360mm
Wheelbase: 5910mm
Tandem Wheelbase: 1520mm
Ground Clearance: 355mm
Engine
Manufacturer: MTB
Model: 6D22C
Rated Output: 110.3kW (150 PS) @ 2000rpm
Cylinders: 6
Bore x Stroke: 130 x 140mm
Displacement: 11.2liters
Hydraulic System
Output Pressure: 17.2MPa
Oil Flow Rate: 128L/min
Transmission
Type: DPS
Speeds: 6 forward / 6 reverse
Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse)
Tires
Front: 13.00-24, 14-ply
Rear: 13.00-24, 14-ply
Performance & Other Features
Operation Type: Hydraulic (HYD)
Scarifying Width: 1225mm
Minimum Turning Radius: 6900mm
Articulate Angle: 25
Fuel Tank Capacity: 230L
Optional Equipment: BL(4000), S/C

Model: mp200 mp250
Work width: 200mm 250mm
Power of engine: 5.5hp(honda) 9hp
5.0hp(robin)
Package size(cm): 100*45*110 100*45*110
G.W: 100kg 120kg
N.W: 110kg 130kg

Road & Asphalt Machinery

Greaders For Road Work

Handpush thermoplastic road marking machine's floor knife adopts imported hard tungsten steel knife-head with high viscidity and abrasion resistance, which makes the line edge facile and straight.
1.Marking shoe: Marking shoe and paint tank are integrally designed and hung inside frame of the chassis.The discharging port adopts double-closure to avoid leaking. Screeding knife made of fire resistance, abrasion resistance and oxidation resistance adopts screeding structure to make good quality markings, which ensures the head of marking more regular. Sieve in the paint tank effectively removes the impurity in it. The capacity of the shoe:65kg
2.Heating system: Petroleum liquified gas tank is used for respectively gas to front and back two row nozzles and outside inflame gun, whose power is controlled by different valves. The valves and gas tools adopt imported parts, and connection pipes are imported rubber pipes with heat and pressure resistance.
3.Glass beads bin: With gear transmission, the dispensing gear definitely rolls. Equip with automatic clutch device synchronous with screeding shoe; bin with windows can check the quantity of glass beads in time. The capacity: 30kg.
4.Chassis: Firm welding frame, the surface has been galvanized, chrome-plated or high temperature treatment. Equip with heat resistance (350), abrasion resistance modified rubber with the diameter 200mm, which can effectively prevent tackless or deformation after long time of high temperature work. The wheel nave is made of refined steel, and equip with high speed imported bearing, which makes the whole machine lighter and more convenient.
5.Handle bar: Individual design conforms to the requirements of human body project. The operation height can be adjusted according to the needs of the operator.

Primer, a bonding material is used when making the heat fusion road markings. The prime can prevent the film from coming off and strengthen the adhesive force between the film and the road surface. Primer(sprayable) machine is the assistant equipment for drawing heat fusion markings. It chooses the gasoline engine as its power working together with the auto aircompressor to paint, which improves the working efficiency, meanwhile reduces the intensity of labor. It will not bring any noise or pollution. The guide bar of the paint gun can be adjusted up and down, in order to adjust the width of the paint accuratly and conveniently. The machine is easy to operate and maintain, moreover, its service life is long.



Size: 800*400*850mm
Net weight: 50kg

Scarifier machine are specially used in scarifying and cleaning concrete and asphalt surface, such as sidewalk repairing, coating removal, floor cleaning, and traffic marking removal, wipe off epoxy resin and wearproof ground as well as old damaged surface and dirt retention. The declination-feed milling-planning mode and the design of adjustable milling depth ensure the quality of the milling.