Safe Ventilation Through Whole Treatment Phase
Initial Treatment Phase
Noninvasive ventilation mode associated with decreased intubation rates, shortened patient stays, improved patient comfort, and a reduced risk of cross infection
Preset patient's height and IBW. Reduce clinician's workload
Stable Condition Phase
PRVC and BIVENT employ lung-protective strategies, delivering intelligent ventilation
Comprehensive lung mechanics monitoring include compliance, airway resistance,
PEEPi and time constant
Three waveforms & three loops with user-friendly display provide a continuous
monitoring of the patientâ??s condition
Weaning Phase
Various ventilation modes enhance the weaning process
The unique trigger and leakage compensation system safeguards each and every
patient breath resulting in smooth and comfortable breathing, avoiding extra
workload on the patient and promoting recovery
RSBI and WOB provide accurate reference for weaning
Rehab Phase
Data export port provides connection to hospital monitors and Patient Data
Management Systems
Provides pressure support for the patient when spontaneous breathing is presen
Tidal Volume:20-2500ml
Display:10.4 TFT touch screen
Type:pneumatically driven tronic control
Gas supply:medical o2, medical air
Pneumatic system safe pressure:125cmH2O
Power supply:AC 110-240V, 50-60 Hz
Battery:Lithium battery, backup for more than 2 hours
Product Size:H400mm* W303mm * L250mm Weight: 16kg
HS code:9031809090
Real-time waveforms: Paw, Flow, Volume, EtCO2, SPO2
Optional: CO2, SPO2 (related parameters)
Loops: P-V, V-Flow, Flow- P
Trends: 1s, 5s,1min,10min, 30min, 60min
Tidal volume: 5 to 2000mL
PEEP/CPAP: 0 to 30 cmH2O
Oxygen: 21 to 100%
I:E ratio: 1:10 to 4:1
Inspiratory time (TI): 0.2 to 5 s
Flow trigger: 0.2 to 15 l/min
Pressure trigger: -0.5 to -20cmH2O
Pressure control: 5 to 90 cmH2O, added to PEEP/CPAP
Pressure support: 0 to 90 cmH2O, added to PEEP/CPAP
Pressure ramp: 0 to 2s
Expiratory trigger sensitivity (ETS): OFF, 5 to 90 % of inspiratory peak flow
Peak flow Spontaneous: > 210 L/min
Input voltage: 100 to 240V ~ �?�±10 %, 50 / 60 Hz AC or 24 VDC�?�±10 %
Power consumption: 50 W typical
Protection class: Class I
Backup battery: batteries(5200mAh each)/ hot swappable
Oxygen supply: 280 to 600 kPa (41 to 87 psi), 120 L / min
Low pressure: oxygen �¢?�¤15 L / min, max. 600 hPa for low pressure
Operator-adjustable: Low/high minute volume, low/high pressure, low/high tidal volume, low/high rate, apnea time, low/high oxygen
Optional: low/high CO2, low/high SPO2
Special alarms: Oxygen concentration, disconnection, loss of PEEP, exhalation obstruction, flow sensor, power supply batteries, gas supply
Loudness Adjustable: 1 to 9
Event log: Storage and display of up to 1000 events with date and time stamp
Weight: < 45.3 kg
Dimensions(WxHxD): Approx. 600x402x415mm
P30 Portable Non-invasive ventilation P30 is mainly applicable to patients with mild or moderate respiratory failure, no evidence of emergency intubation, relatively stable vital signs, and no contraindication to non-invasive ventilation. It is used for early intervention and assisted withdrawal of respiratory failure.
Advantages
Small SIze and easy to carry
Color LCD display, easy to operate
Display and monitor patient clinical usage data in real time
Features
Low-flow oxygen can be connected for air-oxygen mixing
Power supply
Voltage: 100~240V
Frequency: 50HZ, 60HZ
Input Power: 80VA
Internal Power: DC12V�¯�¼? 4AH
Packing Size
Main engine: L 560 * W 560 * H 605 mm
G.W.:35kg
Air Compressor: L 683 * Wv687 * H 1140 mm
G.W.: 100kg
The YH-830 Bi-level device is indicated for treatment of sleep apnea hyponea syndrome in patients weighing more than 66Ib (30kg). It is intended both for home use and hospital use. The water tank is intended for single patient use in the home environment and re-use in a hospital/institutional environment.
Maximum inhale pressure 30cmH2O, with separate humidifier (better humidification)
ST and target tidal volume mode settings
Fast rise time
Normal inhalation intensity, respiration rate is 54 times / min, with each exhalation triggering the ventilator perfectly.
The Y-30T respiratory ventilator comes with a humidifier and provides non-invasive ventilation for patients with respiratory insufficiency.
BiPAP demonstrates excellent therapeutic effect for diseases like obstructive sleep apnea-hypopnea syndrome, SOAGG, chronic obstructive pulmonary disease, COPD, interstitial lung disease, ISL, spinal muscular atrophy, CMA, Pickwick syndrome, cystic fibrosis and amyotrophic lateral sclerosis, or ALS.
BiPAP synchronizes quickly with the individual characteristics of the patient's body, with increased sensitivity of sensors and automatic adaptability of settings. BiPAP is easy to set up, and allows fast switches from different treatments, regardless of the number of patients and the complexity of the disease.
Simple, reliable, sensitive, quickly synchronized with the patient
Suitable for home use
Non-invasive
CPAP, S, S / T, T operating modes
IPAP 4-30, EPAP 4-30
8-step inhalation-exhalation triggers
Adjustable inhalation-exhalation pressure
Inhalation time (0.5-3 seconds) and respiration rate
3.5 "color LCD display; high-quality body and humidifier material
Monitoring Vt, Res Rate, Min Vent, Leak. Alarms in all respects
5-step adjustment of the humidifier
Display of the key parameters of therapy in the online mode
