Please provide a quotation to the following requirement from importer -
Product Name: Crude Glycerine
Specifications:
Crude 60%
Spec: 1. Glycerin Content (%): 80.0 = Glycerin Content Less Than 85.0 2. Sulfate (g/L): 0.001 Less Than Sulfate = 0.0015 3. PH: 4.5 = PH Less Than 5 or 8.0 Less Than PH = 8.5 4. Water Content (%): 10 Less Than Water = 12 5. Ash Content (%): 5 Less Than Ash = 7 6. Non-Glycerin Organic Matter (MONG %): 2 Less Than MONG = 3 7. Chlorination (mmol/100g): 2.5 Less Than Chlorination = 3.5 8. Appearance and Odor: Slight stratification, no foul odor
Quantity: 12,000MT per month
Please provide a quotation to the following requirement from importer -
Product : Antimony trisulfide
Specifications:
1. Antimony Sulphide No-1 Sb = 70~73% 1. Appearance: Gray black color with metallic luminosity no impurities needle like crystals. 2. Water Content More Than 0.02% 3. Combined sulpher: 25-28.3% 4. Free sulpher: 0.07% + 5 Insoluble in HCI More Than 1.5% 6 Insoluble in Aqua regia More Than 0.5% 7. Arsenic Sulphide More Than 0.7% 8. Sp. Gravity (Room Temperature): 4.5 - 4.75
Specifications:
Technical Specification Of Qaut Amine
Parameters Range/Values Units Remarks
Appearance and Observations:
Colorless to Slightly yellowish pasty material
Chemical and Physical Specifications:
1. Free Amine Value 1.5 mg KOH / gm Maximum
2. Amine (HCl value) 1.0 mg KOH / gm Maximum
3. pH (10 % in distilled water) 6 - 9
4. % Active content 74 - 77
5. Color Gardener 2.0 Maximum
6. Salt (NaCl) 0.2 Maximum
7. Methyl Chloride 15 mg/kg Maximum
Payment Terms:
SBLC by mt760, non-transferable, irrevocable, and payment is via MT103/TT upon arrival of each shipment at the port of discharge.
Destination:
Izmit Port, Turkey
Looking for suppliers from:
Worldwide except Africa, Asia, North America, Oceania
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product : Methanol Ch3oh, Purity 99%
Specifications:
General Specification For Methanol (CHaOH), covering its physical, chemical, and purity standards. These specifications are commonly used in industrial, laboratory, and commercial contexts:
1. General Properties
Chemical Formula: CHOH
Molecular Weight: 32.04 g/mol
Appearance: Colorless, clear liquid
Odor: Slightly alcoholic
Boiling Point: ~64.7 °C
Freezing Point: ~-97.6°C
Density (@20 °C): 0.791 - 0.793 g/cm³
pH: Neutral (~7 at 20 °C)
2. Purity
Methanol Content: 99.85% (or as per grade, such as 99.9% for high-purity applications)
Water Content: 0.1% or 1000 ppm (measured by Karl Fischer Titration)
Ethanol: 0.001%
Carbonyl Compounds (as CHCHO): 0.002%
Total Acidity (as HCOOH): 0.003%
Chloride (Clâ): 0.5 ppm
Iron (Fe): 0.1 ppm
3. Physical Characteristics
Color (Pt-Co): 5 (very low color intensity)
Refractive Index (@20 °C): 1.3284 - 1.3290
Vapor Pressure (@20 °C): ~13 kPa
Specific Gravity (@20 °C): 0.791 - 0.793
4. Impurities and Residentials
Residue on Evaporation: 0.001%
Sulphate (SO²»): 0.5 ppm
Heavy Metals (as Pb): 0.1 ppm
5. Grades and Standards
Methanol is classified into different grades based on its purity and intended application:
1. Industrial Grade: Used in fuel, solvents, and biodiesel production.
2. Lab Grade: For analytical and research purposes.
3. Pharmaceutical Grade: Meets strict purity requirements for use in medicine and drug synthesis.
Common specifications are standardized by organizations like:
ASTM: D1152 for methanol purity in industrial applications.
ISO Standards: For international compliance and quality.
6. Applications
Methanol is widely used in:
Chemical Industry: To produce formaldehyde, acetic acid, and other derivatives.
Energy Sector: As a fuel additive, biodiesel component, and hydrogen carrier for fuel cells.
Solvents: In paints, coatings, and cleaning products.
Automotive: Antifreeze and windshield washer fluids.
If you need a specific specification (e.g., ASTM D1152 or ISO 22241), I can provide more detailed information. Let me know your use case or industry!
NOTE: NEED ORIGIN FROM SELLER
Quantity:40,000 tons x 12 months
Quantity Required : 40000 Ton/Tons
Shipping Terms : CIF
Destination Port : Izmit Port, Turkey
Payment Terms : SBLC by mt760, non-transferable, irrevocable, and payment is via MT103/TT upon arrival of each shipment at the port of discharge.
