The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile.
1. NC controller and touch screen are used for easy operation and fault detection.
2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
3. Automatic feeding stroke of 1400mm can feed the material to the overpass.
4. Saw blade horizontal saw cutting, suitable for wide and large material processing.
5. High precision ball screw driven by servo motor.
6. Oil production pressure push in the feeding mode, high sawing stability.
7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time.
8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved.
9. The processing machine will automatically have no material induction or can choose to set the length of the tail material.
Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding.
Model ZG-610FAL/NC
Cutting ability WxH
WxH 200x200,210x175,350x130,500x65
Servo drive system Ball screw
The longest feeding trip 1400mm
Automatic feeding accuracy ±0.1 mm
Saw blade 2000 r.p.m.
Machine motor 10HP( optional 15 HP)
Servomotor horsepower 1 KW
Hydraulic pump motor 3 HP
The touch screen 7 "
Blade size 14"~24" (1" The aperture )
Operating air pressure 6 kg/cm²
Machine dimension 3500 x 2100 x 1860 mm
Machine weight 2300 kgs
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles.
1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency.
2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy.
3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available.
4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing).
5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness.
6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade.
7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate.
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.
1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency.
2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy
3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time
4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5. press height and speed and saw cutting height and speed can be set according to material size and thickness.
6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life
7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate.
The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile.
1. NC controller and touch screen are used for easy operation and fault detection.
2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
3. Automatic feeding stroke of 1400mm can feed the material to the overpass.
4. Saw blade horizontal saw cutting, suitable for wide and large material processing.
5. High precision ball screw driven by servo motor.
6. Oil production pressure push in the feeding mode, high sawing stability.
7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time.
8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved.
9. The processing machine will automatically have no material induction or can choose to set the length of the tail material.
Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding.
Model ZG-610FAL/NC
Cutting ability WxH
WxH 200x200,210x175,350x130,500x65
Servo drive system Ball screw
The longest feeding trip 1400mm
Automatic feeding accuracy ±0.1 mm
Saw blade 2000 r.p.m.
Machine motor 10HP( optional 15 HP)
Servomotor horsepower 1 KW
Hydraulic pump motor 3 HP
The touch screen 7 "
Blade size 14"~24" (1" The aperture )
Operating air pressure 6 kg/cm²
Machine dimension 3500 x 2100 x 1860 mm
Machine weight 2300 kgs
The machine for cutting large amount, high accuracy requirement and development and design. Can be a single or multiple overlapping, and cutting at the same time. Saw cut surface is bright and clean without burr, without secondary processing. Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass and carbon fiber material, especially suitable for aluminium and copper electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type display equipment, aluminum furniture, aluminum extrusion and precision cutting of different profile.
1. NC controller and touch screen are used for easy operation and fault detection.
2. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
3. Automatic feeding stroke of 1400mm can feed the material to the overpass.
4. Saw blade horizontal saw cutting, suitable for wide and large material processing.
5. High precision ball screw driven by servo motor.
6. Oil production pressure push in the feeding mode, high sawing stability.
7. The fixture on the feeding table is 2 sets of upward pressure and 2 sets of lateral pressure, suitable for irregular material sawing and several pieces of material sawing at the same time.
8. Special cutting action design: after saw blades linear cutting materials, controlled by the air compressor cylinder will work platform, after pulling open saw blades back to the origin. This feature is in the process of machining, in order to avoid material affected by the saw blade knife back and surface smoothness and accuracy are specially designed, so that materials processing surface more smooth and more accurate, precision improved.
9. The processing machine will automatically have no material induction or can choose to set the length of the tail material.
Materials may be placed side by side and overlapped.Special sawing action design feeding mode :1. Feed to cover 2. Manual feeding.
Model ZG-610FAL/NC
Cutting ability WxH
WxH 200x200,210x175,350x130,500x65
Servo drive system Ball screw
The longest feeding trip 1400mm
Automatic feeding accuracy ±0.1 mm
Saw blade 2000 r.p.m.
Machine motor 10HP( optional 15 HP)
Servomotor horsepower 1 KW
Hydraulic pump motor 3 HP
The touch screen 7 "
Blade size 14"~24" (1" The aperture )
Operating air pressure 6 kg/cm²
Machine dimension 3500 x 2100 x 1860 mm
Machine weight 2300 kgs
Hydraulic metal cutting machine: adopt hydraulic pump as feeding power and feed via vertical track. Compared to pneumatic cutting machine, its feeding strength is heavier and its cutting is flatter and more stable. Adopt low speed cutting for saw blade rotation. It is suitable for saw cutting thick steel and stainless pipes, bars and other irregular materials and so on. High cutting precision, smooth cutting surface, burr-free and high efficiency.
1.Vertical track feeding and retracting: stable feeding, long tooling life and high cutting precision.
2.European design, multi group gears driving and be suitable for heavy cutting and stable precision.
3.Cooling cycle system (water soluble cutting liquid) makes work-piece cutting surface smooth and accurate, burr-free and prolongs using life of the saw blade. Be suitable for long-time and large amount of cutting.90°direct cutting, 90°-45° left and right bias cutting available.
Model ï¼?ZG-375SAï¼?
Sawing angle 90° 45°
Cutting capacityï¼?mmï¼?
120 100
120Ã?120 105Ã?105
150Ã?60 110Ã?60
70 60
65Ã?65 55Ã?55
Machine motor 3HP
Spindle speed 58/29R.P.M
Cooling water pump 1/8HP
Saw blade HSS OD Ï?275ã??Ï?400Ã?Shaft Ï?32ï¼?Pin hole2Ã?Ï?11Ã?63mm
The use of hydraulic pressure 25-35kg/cm²
Machine dimension Approximately 620kgs
NW/GWï¼?LÃ?WÃ?Hï¼? 1610Ã?780Ã?2130mm
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing.
1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.
2. NC controller and touch screen are used for easy operation and fault detection.
3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.
5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.
6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.
7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.
Model ZG-360NC
Cutting Angle 90°
Cutting ability
mm
110
105Ã?105
175Ã?50
90
80Ã?80
Machine motor 5.5HP 4P
Saw blade 2850R.P.M
Feed servo motor 1KW
Blade size Tungsten steel blade with blade tip
Ï?305ã??405Ã?Ï?25.4mm
Operating air pressure 6-8kg/cm2
Machine dimension 2000Ã?1100Ã?2006
Machine weight 960kg
Hydraulic metal cutting machine: adopt hydraulic pump as feeding power and feed via vertical track. Compared to pneumatic cutting machine, its feeding strength is heavier and its cutting is flatter and more stable. Adopt low speed cutting for saw blade rotation. It is suitable for saw cutting thick steel and stainless pipes, bars and other irregular materials and so on. High cutting precision, smooth cutting surface, burr-free and high efficiency.
1.Vertical track feeding and retracting: stable feeding, long tooling life and high cutting precision.
2.European design, multi group gears driving and be suitable for heavy cutting and stable precision.
3.Cooling cycle system (water soluble cutting liquid) makes work-piece cutting surface smooth and accurate, burr-free and prolongs using life of the saw blade. Be suitable for long-time and large amount of cutting.90°direct cutting, 90°-45° left and right bias cutting available.
ModelZG-375SA
Sawing angle90°45°
Cutting capacitymm
120100
120Ã?120105Ã?105
150Ã?60110Ã?60
7060
65Ã?6555Ã?55
Machine motor3HP
Spindle speed58/29R.P.M
Cooling water pump1/8HP
Saw bladeHSS OD Ï?275ã??Ï?400Ã?Shaft Ï?32Pin hole2Ã?Ï?11Ã?63mm
The use of hydraulic pressure25-35kg/cm²
Machine dimensionApproximately 620kgs
NW/GWLÃ?WÃ?H1610Ã?780Ã?2130mm
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing.
1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.
2. NC controller and touch screen are used for easy operation and fault detection.
3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.
5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.
6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.
7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.
Model ZG-360NC
Cutting Angle 90°
Cutting ability
mm
110
105Ã?105
175Ã?50
90
80Ã?80
Machine motor 5.5HP 4P
Saw blade 2850R.P.M
Feed servo motor 1KW
Blade size Tungsten steel blade with blade tip
Ï?305ã??405Ã?Ï?25.4mm
Operating air pressure 6-8kg/cm2
Machine dimension 2000Ã?1100Ã?2006
Machine weight 960kg
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.
1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency.
2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy
3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time
4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5. press height and speed and saw cutting height and speed can be set according to material size and thickness.
6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life
7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate.
