I can provide some general information about guiding catheters and Medtronic's involvement in the medical device industry.
Guiding Catheter:
A guiding catheter is a medical device used in interventional cardiology and radiology procedures. It is designed to guide and support other devices, such as guidewires and balloons, to the target location within the blood vessels.
Medtronic:
Medtronic is a global healthcare company that produces a wide range of medical devices and technologies. They are involved in various medical specialties, including cardiology, neurology, diabetes, and more.
Terumo Runthrough NS PTCA is a medical device designed for use in percutaneous transluminal coronary angioplasty (PTCA) procedures. PTCA is a minimally invasive procedure used to treat coronary artery disease by widening narrowed or blocked coronary arteries.
Here are some key points about the Terumo Runthrough NS PTCA:
Manufacturer: Terumo Corporation is a Japanese company known for its medical devices and healthcare products.
Type: The Runthrough NS PTCA is a guide wire used in PTCA procedures. Guide wires are essential tools that help navigate catheters and other interventional devices through blood vessels during angioplasty.
Function: The guide wire assists in guiding and positioning the catheter within the coronary arteries. It helps the interventional cardiologist navigate through the blood vessels and reach the site of the blockage or narrowing.
Features: The "NS" in Runthrough NS may refer to "non-support" or "normal support," indicating the level of support provided by the guide wire. The choice of guide wire depends on factors such as the location and severity of the arterial blockage.
Usage: The Terumo Runthrough NS PTCA guide wire is specifically designed for use in PTCA procedures to help facilitate the placement of angioplasty balloons and stents.
can provide some general information based on the components mentioned.
HAKKO SONOGUIDE:
HAKKO is a company that produces a range of medical products, including medical devices and equipment.
PTC Needle (PTCB:18G*200mm):
"PTC" likely refers to a percutaneous transluminal catheter or a similar medical device used for procedures like angioplasty.
"18G*200mm" indicates the gauge and length of the needle. In this case, it suggests an 18-gauge needle with a length of 200mm.
Cordis is a well-known medical device company that produces a variety of products, including devices used in interventional cardiology and vascular procedures.
The Cordis Saber PTA balloon is likely designed for use in percutaneous transluminal angioplasty procedures. Angioplasty is a medical procedure used to open narrowed or blocked blood vessels, typically arteries, to improve blood flow. During angioplasty, a balloon catheter is inflated at the site of the blockage to widen the vessel and restore blood flow.
Here are some general features you might expect from a PTA balloon like Cordis Saber:
Balloon Material: The balloon is typically made of materials like polyethylene or polyurethane.
Inflation System: It would likely have an inflation system that allows controlled inflation and deflation of the balloon during the procedure.
Catheter Design: The balloon is mounted on a catheter, which is a flexible tube that allows the device to be threaded through blood vessels to the site of the blockage.
Guidewire Compatibility: PTA balloons are often designed to be used with guide wires for precise placement.
he Terumo Runthrough NS PTCA (Percutaneous Transluminal Coronary Angioplasty) guide wire is a product manufactured by Terumo Corporation, a global medical device company. Guide wires are essential tools used in cardiovascular procedures, particularly in angioplasty and stenting, to navigate through blood vessels and provide support for the delivery of catheters and other interventional devices.
Key features and characteristics of the Terumo Runthrough NS PTCA guide wire may include:
Hydrophilic Coating: Many Terumo guide wires, including the Runthrough NS, are known for their hydrophilic coating. This coating facilitates smoother navigation through blood vessels, reducing friction and enhancing steerability.
Flexible Design: The guide wire is designed to be flexible, allowing it to navigate tortuous vessels and reach target locations with precision.
Radiopaque Tip: The tip of the guide wire is often radiopaque, making it visible under fluoroscopy or other imaging modalities. This feature helps interventional cardiologists visualize the position of the guide wire during the procedure.
Different Tip Configurations: Guide wires may come with different tip configurations, such as soft or floppy tips for ease of navigation or more supportive tips for crossing lesions.
Various Lengths and Diameters: Terumo typically offers guide wires in various lengths and diameters to accommodate different patient anatomies and procedural requirements.
Features and Benefits
Sterile pack, single use only.
Needle-stick prevention, safety assured.
Special needle tip design to prevent rubber fragment contamination.
Luer connector, equipped with needleless connector, heparin cap, Y three-way.
Chassis sponge design for a more comfortable application.
High pressure resistant central line with 325 P.S.I
Two holes connector optional.
MDR 2017/745
USA FDA 510K
Refer Standards
ISO 10555-6:2015 Intravascular catheters - Sterile and single-use catheters Part 6: Subcutaneous implanted ports.
ISO 8536-4: 2010 Infusion equipment medical use- Part 4: Infusion Sets for single use, gravity feed.
ISO 23908:2011 Sharps injury protection Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood Samplings.
ISO 7864:2016 Sterile Hypodemic Needles for Single-use requirements and test methods.
ISO 9626:2016 Stainless Steel Needle Tubing for the Manufacture of Medical Devices requirements and Test methods.
ISO 80369-7: 2016 Small - bore connectors for liquids and gases in healthcare applications.
Part 7: Connectors for intravascular or hypodermic applications.
ISO 10993-7:2008 Biological Evaluation of Medical Device - Part 7: Ethylene Oxide Sterilization Residuals.
What is a Foley Catheter/ Foley Balloon Catheter
A Foley catheter is a thin, flexible and sterile tube which is passed through the urethra into the urinary bladder. Urine drains from the bladder into a bag which is attached to one of the lumens of the catheter. The urinary catheter is held in its place with a balloon at one end which is filled with sterile water.
When is a Foley Catheter used?
The need for catheterization arises in a number of conditions including:
When there is hesitation or inability to urinate due to retention (due to anomalies in the urinary stream)
When there is an anatomical obstruction to the urethra (prostate cancer etc.)
To monitor urine samples of critical patient
Material composition:
latex rubber, silicone and silicone coated variants are available. Traditionally, these urinary catheters have been made from latex, however, silicone due to its more inert nature is now gaining preference especially for long term use and where cost is not a constraint.
Super smooth kink resistance tubing ensures uniform flowrate.
For removal of secretion from trachea and bronchial region.
Atraumatic, soft rounded, Open Distal end with one lateral eyes for non-traumatic insertion.
A Foley catheter is a common type of indwelling catheter. It has, soft, plastic or rubber tube that is inserted into the bladder to drain the urine. In most cases, your provider will use the smallest catheter that is appropriate.
