Plasticizer A LTS-82A 86A is a mixture of high molecular weight aliphatic polymers containing unsaturated bonds and active agents.
The product does not affect the physical properties of the rubber compound, and has the property of reducing the Mooney viscosity and shortening the mixing time, and the hardness of the finished product is not affected.
Inorganic fillers such as carbon black and white carbon have high-performance dispersion, improve extrusion and injection properties of rubber compounds, smooth surface, and significantly reduce internal porosity.
This product can reduce the heat generation of the rubber compound, reduce wear, improve tire life and reduce energy consumption.
Silicone rubber surfactant (Organic silicone surface additive) Application:
It can be used as a spray modifier, foliar absorption aids, activation agent, widely used herbicide, liquid nutrients, growth regulators, insecticides, fungicides, which do not decompose the original pesticide, can greatly reduce the surface tension of the solution, reducing the contact between the droplet and the leaf angle, surface enhanced the liquid in the plant or pest surface wetting, adhesion, and a spreader, thereby improving efficacy.
Silicone surfactant ZINCA-2000 is lower phytotoxicity and environmental hazards than the normal fatty amines, ethoxylated alcohol surfactant, and greatly reduce human and environmental impact.
Chemical Name : N,N-m-phenylene bismaleimide
Molecular Formula: C14H8N2O4
Molecular Weight: 268.23
CAS NO. :3006-93-7
Specifications
Item
powder
Oiled Powder
Appearance
Yellow or brown powder
Initial Melting Point
198.0
198.0
Loss on Drying%
0.50
0.50
Ash%
0.50
0.50
Residue on 150¼m Sieve,%
0.10
0.10
Oil content,%
----
1.0~2.0
Strength
----
----
Physical property
Density at 20â??(kg/m)3
950
950
Properties:
Yellow or brown powder, soluble in THF and 1.44 share of hot acetone, insoluble in petroleum ether, chloroform,benzene and water, melting point 195 C or more.
Applications:
PDM as a function of rubber chemicals in rubber processing for the curing agent can also help the system can be used for peroxide curing agent, also can be used as anti-scorching agent and tackifier, both for general-purpose rubber, also applies to special rubber and rubber and use system. In natural rubber, and sulfur coordination to prevent reversion to improve the heat resistance, reduce heat, anti-aging, improve adhesion of the rubber and tire cord and the vulcanized rubber modulus. Shoulder for load tire rubber, rubber buffer layer, solve the problem of bias truck tire shoulder separation can also be used for large-size thick natural rubber products and various rubber sundries. PDM can be used as auxiliary curing agent, can significantly improve the correlation performance, increase heat resistance, suitable for high temperature curing system, reducing the compression is very obvious, but also reduce the amount of peroxide, preventing the processing of rubber in the focus burning, improve tire cord and rubber and metal bond strength. PDM is a non-sulfur vulcanizing agent for rubber cable, it can replace thiazoles, thiuram and all sulfur vulcanizing agent, solution of copper wire and copper electrical generation due to exposure to sulfur vulcanizing agent black copper sulfide contamination problems. As scorch agent for the 0.5-1.0 copies, as curing agent for the 2-3, to improve the compressive deformation of 1.5 copies, improve the adhesive strength of 0.5-5.0 copies.
Package:
25kg plastic woven bag, paper with plastic film bag, kraft paper bag.
Storage:
Should be stored in a cool, dry, well ventilated place, packaged products should avoid direct sunlight.
Notes:
This product is oil based on user needs, treatment or granulation.
Brief Introduction: Adhesive RA-65 is composed of Hexamethoxymethylmelamine and an inert Carrier. In conjunction with methylene receptor, it can effectively promote the adhesion between rubber and steel reinforcing material.
Technical Specification:
Appearance: White powder
Ash Content (850oC), % : 29~35
Moisture content (Boiling Evaporation Method) â?¤4.5
Sieve Residue (325 mesh wet-method), % â?¤0.3
Free formaldehyde, % â?¤0.1
Application: This product is used in binding Rubber with steel wire, Nylon, Rayon, fiberglass, etc. In using this product, simply mix it directly into Rubber and it can achieve good adhesive effect by vulcanizing. If this product blended with Rubber Adhesive RS, RH, RE, it can bring in better effect. As this product is one kind of white powder, and has good dispersing feature, it is easy to measure and use.
Chemical Name : N - ( 1 ,3 - dimethylbutyl ) - N' - phenyl - p â?? phenylenediamine
Specification:
Item Qualitied Grade
Appearance Dark purple pastlles.Dark purple pastilles
Melting Point â?¥â?? 45.0
Heating loss(60-70â??)â?¤% 0.30
Ash â?¤% 0.15
Assay(GC)â?¥% 96.0
Freezing pointâ?¥â?? 45.5
Properties:
The cinereus solid, the relative density 0.986-1.00, dissolve in the benzene, the acetone, the ethanoic acid, the ethyl acetate, the dichloroethane alkane and the toluene, does not dissolve in the water.
Application :
Mainly used in manufacture of tires , rubber shoes and other rubber products.
Packaging:
20/25kg kraft paper bag.
Storage:
It should be stored in cool,well ventilated & dry places and away from fire.It should avoid drench and solarization while transportation.
Chemical Name: Zine salt of 2-mercaptobenzimidazole
Specification:
Item Powder Oiled powder
Appearance White powder
Initial M.P. �¿C â?¥ 240.0 240.0
Loss on drying % â?¤ 0.50 0.50
Zinc content % 18.0-20.0 18.0-20.0
Residues on 150�¼m sieve, % â?¤ 0.50 0.50
Additive, % -- 1.0-2.0
Properties:
White powder. No smell but taste bitter. Soluble in acetone, alcohol, insoluble in benzene gasoline and water.
Application:
Applications A non-staining secondary antioxidant for NR, CR, SBR, NBR, EPR, etc. Especially effective against heat oxidation in combination with amine. Could be used alone or combined with the anti-degradants, such as DNR or AP.
Packaging:
25kg plastic woven bag, paper with plastic film bag, kraft paper bag.
Storage:
The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name: 2,2'-methylenebis(4-methyl-6-tertbutylphenol)
Specification:
Item Index
Appearance White powder
Purity,% â?¥ 99.0
Initial Melting pointoCâ?¥ 125.0
Heating loss, % â?¤ 0.50
Ash % â?¤ 0.10
Residues on 150�¼m sieve, % â?¤ 0.20
Properties:
White, grey-white to slightly yellow powder, low volatility, steam pressure 2mm/Hg columniation (160oC). In rubber, solubility exceeds2%, in organic impregnant (such as carbinol, Alcohol, Benzene, Acetone, Ethyl acetate, Chloroform) it can well dissolve. Because of the hindered phenolic structure, its chemical character is not lively. In storage it can keep stable conditions. It will appear slightly red after long storage, but have no effect on antioxidant.
Application:
It can be used as antioxidant in natural rubber, latex, synthetic latex, as well as kinds of plastic products. Also in oil products and fattiness food, it can act suitable antioxidant. This product has low toxicity and volatility, no pollution coloration to the applied products. It's a widely applied hindered phenolic antioxidant.
Packaging:
20kg plastic woven bag, paper with plastic film bag.
