The PBC/PBS is built based on PM collimator and Wollaston prism, with All-glass technique sealed.Process. lt can combine two polarization state into one single mode fiber or split single mode into.Two vertical polarization states.Mostly used in Raman Amplifier,combine two vertical polar states.To get a double power light
Fiber optic Faraday rotator mirror is a fiber optic device that can serve as both the reference mirror and the probing mirror. The device functions as a phase conjugate mirror by creating a phase delay of 90 degrees. This feature allows the mirror and the return path of the beam to automatically compensate for any induced birefringence the beam experiences during the first of leg of the travel. Therefore, the Faraday rotator mirror is an important part of the fiber optic Michelson Interferometer.
The Faraday rotator mirror has been used widely to compensate for induced phase changes in many other waveguide applications.
Faraday Rotator Mirrors are available pigtailed with 1 m of standard Corning SMF-28e+ single mode fiber. The fiber is mounted in a standard �?900 µm tight tube buffer with proper strain relief, and an optional 2.0 mm narrow key FC/PC or FC/APC connector is available.
The Faraday Rotation Mirror is built with ALL-glass technique sealed process, it performs wide working wavelength range so that fit for various wavelength , it can rotate the input signal polarization state for 90°or 180° after reflect back ,widely used in sensor system.
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors. FC connectors can be supplied with wide key (2.14mm, N type) or narrow key (2.02mm, R key) width. Patchcords can be supplied in 250um bare fiber, 900um buffered fiber or 3mm cable. PMP features low insertion loss, high extinction ratio and high return loss. The slow or fast axis can be aligned to the connector key.
The PMI is built based on PM collimator and Faraday isolator core with All-glass technique sealed process, which makes the isolator has very high stability and reliability.
This product is used in free-space coupling in micro optics, used individually or in pairs.Â
Multiple wavelengths (630-1550nm) are available.
Power handling can be customized.
Large-mode-area fiber is available.
Working distance can be customized.
Depolarizer can change polarized light into natural light, and it can also reduce the influence of polarization on the system. It is widely used in polarization-maintaining sensing systems such as optical fiber sensors and optical fiber galvanometers. It has the characteristics of low polarization, low insertion loss and high return loss.
Polarization-maintaining optical wavelength division multiplexer is an optical fiber wavelength division multiplexer made of polarization-maintaining optical fibers.It is Widely used in optical communication networks, optical EDFA, sensing systems and other optical communications.
These Polarization Maintaining Filter Couplers offer low insertion loss, high extinction ratio and excellent enviromental stability. Accurate coupling ratios are available with good uniformity in a wide wavelength range. It could be used to perform power splitting and mornitoring functions in CATV Systems, Fiberoptic Sensors, Local Area Network, and other kinds of optical communication systems.
Polarization maintaining optical circulators for fiber optic applications. A first embodiment uses birefringent wedges and Faraday rotators in an inline configuration. The second embodiment utilizes a polarizing beam splitting cube and
