Bengal Electra & Security System

"Total Weight - 1.3 KG
Diameter - 146mm
Activation Time - Approx 10 seconds
Warning Sound - 120 - 140 dBA
Fire Extinguish for an area - 3 Cubic Meters"

Key Specifications :
Work on all types of fire
Automatically activates upon contact with flames
Simple to use, no training required
Ideal for homes, offices, hotel, industrial settings
provides fast and reliable fire safety
No maintenance cost required for Agni Kawach fire extinguisher ball."

The Notifier NBG-12 Series Pull Station is a fire alarm initiation device that allows manual activation of the fire alarm system. It typically consists of a red or yellow manual-pull handle or lever, which when activated, sends a signal to the fire alarm control panel to initiate an alarm. The NBG-12 series is designed for use in fire alarm systems and is commonly used in commercial, industrial, and residential buildings. The product is known for its durability and reliability, and it meets industry standards for fire alarm systems.

RP-2001 is a UL listed six-zone fire alarm control panel for single and dual hazard deluge and preaction applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring water-based releasing.!
Features & Benefits:
1. Designed for sprinkler standards NFPA 13, 15 and 16.
2. Dual hazard operation.
3. Cross-zone (double-interlock) capability.
4. Six programmable Style B (Class B) IDCs (Initiating Device Circuit).
5. Optional Digital Alarm Communicators

RP-2002 is a UL listed six-zone fire alarm control panel for single and dual hazard agent releasing applications, providing fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based releasing.

Features & Benefits:

Disable/Enable control per input zone and output zone.
Extensive transient protection.
Dual hazard operation
Meets International Building Code (IBC) seismic requirements

Intelligent fire Detection system as a high efficiency and low cost unmanned fire detection system in capable of an early detection regardless spontaneously fire or firebug.
This system is located in outdoor area such small and middle sized cultureal assets, natural monument and outdoor facilities.

A fire alarm system is a set of electric/electronic devices/equipment working together to detect and alert people through visual and audio appliances when smoke/fire is present. These alarms may be activated from smoke detectors, heat detectors, water flow sensors, which are automatic or from a manual fire alarm pull station.

Types of Fire Alarm System:
All Fire Alarm Systems essentially operate on the same principle. If a detector detects smoke or heat or someone operates a break glass unit (manual break point), then alarm sounders operate to warn others in the building that there may be a fire and to evacuate. It may also incorporate remote signaling equipment which would alert the fire brigade via a central station.

Conventional Fire Alarm System
In a Conventional Fire Alarm System, a number of call points and detectors are wired to the Fire Alarm Control Panel in Zones. A Zone is a circuit and typically one would wire a circuit per floor or fire compartment. The Fire Alarm Control Panel has a number of Zone Lamps. The reason for having Zones is to give a rough idea as to where a fire has occurred. This is important for the fire brigade and of course for the building management. The accuracy of knowing where a fire has started is controlled by the number of Zones a Control Panel has and the number of circuits that have been wired within the building. The Control Panel is wired to a minimum of two sounder circuits which could contain bells, electronic sounders or other audible devices. Each circuit has an end of line device which is used for monitoring purposes.

Addressable Fire Alarm System
The detection principle of an Addressable System (Fire Alarm System) is similar to a Conventional System except that the Control Panel can determine exactly which detector or call point has initiated the alarm. The detection circuit is wired as a loop and multi devices may be connected to each loop. The detectors are essentially Conventional Detectors, with an address built in. The address in each detector is set by dil switches and the Control Panel is programmed to display the information required when that particular detector is operated. Additional Field Devices are available which may be wired to the loop for detection only i.e. it is possible to detect a normally open contact closing such as sprinkler flow switch, or a normally closed contact opening.

Fire Alarm System comes with single loop as well as multi loops. It depends on requirement. The items which are integrated with Fire Alarm Systems are given belowâ?¦.

Brands are available : AGNI, MORLEY, NOTIFIER,

Modern Technologies gives you top class branded Fire Alarm System with affordable price. We also provide installation & maintenance services.

Material: 600D Polyester/1000D Nylon
Color: Black, OD Green, Khaki, Coyote, Multicam and other camouflage
Size: 16 x 15 x 2 cm
Features:
* Made by high quality nylon makes it very durable and reliable
* Perfect for wargame, duty, hunting...all kinds of outdoor activities
* This listing is only the pouch, not including the magazines
* Constructed by high quality Nylon
* With molle webbings for attaching pouches and accessories
* Water-resistant meterial which is incredibly durable
* With small size and light weight which is easy to carry
MOQ: 100 Pcs
OEM Accepted: Yes