Blue Jay Electronic provide temperature & humidity logger
solution, build on our temp. & RH controller can control
environment condition and record the temp. vibration.
The time interval is set by programming can be from 1
second to 2 hours. Use EEPROM s which can store up to
40,000 measurements. This could be one measurement
every 30 seconds for 11 days for example.
The control function with completed FUZZY algorithm
provides very precise of temperature & humidity monitor. FUZZY algorithm control fan or heater to
maintain sensible & latent capacity follows temperature curve by automatically. Display unit can show
environment temperature and humidity as per configure by user. The user also can adjust environment
condition very easily.
Function & Feature
·DIN(48X48mm) or panel mounting
·High measurement indication and control accuracy 0.5?? and 3% RH
·Heat/Cool control and PID control mode
·All settings except time maintained permanently in non-volatile memory until changed by user
·Built-in digital filter reduce interfere
·Self calibration technology, keep stabilization
·Two line LED display show the data Independent, prevent dazzle, highly visible display
·Simple 4-Button user interface
·Switching power supply and low consumption
·Use large capacity relay
·RS 485 interface, easy to get raw data
Blue Jay Electronic provide temperature & humidity logger
solution, build on our temp. & RH controller can control
environment condition and record the temp. vibration.
The time interval is set by programming can be from 1
second to 2 hours. Use EEPROM s which can store up to
40,000 measurements. This could be one measurement
every 30 seconds for 11 days for example.
The control function with completed FUZZY algorithm
provides very precise of temperature & humidity monitor. FUZZY algorithm control fan or heater to
maintain sensible & latent capacity follows temperature curve by automatically. Display unit can show
environment temperature and humidity as per configure by user. The user also can adjust environment
condition very easily.
Function & Feature
DIN(48X48mm) or panel mounting
High measurement indication and control accuracy 0.5â?? and 3% RH
Heat/Cool control and PID control mode
All settings except time maintained permanently in non-volatile memory until changed by user
Built-in digital filter reduce interfere
Self calibration technology, keep stabilization
Two line LED display show the data Independent, prevent dazzle, highly visible display
Simple 4-Button user interface
Switching power supply and low consumption
Use large capacity relay
RS 485 interface, easy to get raw data
Temperature Logging System) is an advanced independent weather monitoring system. It supports Secure Digital card which is used to record the data for 10 years with 2GB SD card and with a LCD for on-line monitoring
Change in temperature at every time second is recorded
Auto sense with 10 years report
Solar powered
No external power supply required
Supports secure Digital card
Auto Data Save Algorithm used
Lcd Display for upto date temperature
Inbuilt RTC
Report with Date/Month/Year/Hr/Min/Sec
Suitable for any remote place
Temperature is calibrated in celsius
Led indication
On -off switch for recording.
Nt-1 rfid temperature logger
Nt-1 is the low-cost contactless temperature logger. ItÆs the combination between
Temperature logger and rfid logistic tag.The customer can use nt-1 to ensure storage
Temperature and also keep product information and identify for item tracking.Useful in food traceability.
-low cost contactless
-temperature logger
-contactless communication
-low frequency
-wide-range temperature
We offer stand-alone Environmental monitoring appliance that provides dynamic, real-time temperature monitoring, humidity monitoring for server room, Datacentre and computer rooms or any critical environment. It has following features:
1) Real time monitoring of Humidity and Temperature.
2) Includes dry contact for alarms from critical equipment include power monitoring, water sensors, smoke and fire alarms, motion detectors, airflow, and access/entry sensors.
3) Permits remote monitoring of temperature, humidity and digital dry contact.
4) Notification of alarms via email, SMS, SNMP traps when specified temperature and humidity thresholds or the change of status of a digital dry contact signal
5) Simple integration to a Building Management System (BMS).
6) Capable of Modbus over TCP/IP. Built-in Web server.
7) Option of additional humidity & Temperature sensor.
8) Datacenter & Server room Environment monitoring & control.
We also offer Facility Monitoring system (FMS) equipment which extreme versatility that simplifies and consolidates monitoring of numerous types of signals and equipment available at facilities. These equipments can be UPS, water leak detection, Close control unit (CCU), access control or any equipment that has dry contact etc. Environmental monitoring, humidity monitoring, temperature monitoring, humidity & temperature monitoring, datacenter, server room, server room, rle, enviromux, nti, liebert, APC, netboltz, Aqualeak, SecurityProbe, openxtra, server room monitoring
Keyword:
Wireless GPRS Temperature Monitoring, GSM SMS Temperature Monitor, 3G Temperature monitoring system, wireless outdoor temperature monitoring system. Temperature SMS alert. wireless temperature sensor, wireless gsm temperature logger,
The GSM GPRS 3G Temperature Logger is specialwireless gprs temperature data logger,
l for remote monitoring temperature. it can setup ultra-highâ??high, lowâ??ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly.
Module Comparison Instruction Table
Model Application Input Types
S260/S260C/S260W Indoor 4 Temp Probe,12bits, measure range :â??55°C to +125°C (â??67°F to +257°F), 0.5°C accuracy from â??10°C to +85°C.
S261/S261C/S261W Outdoor
S262/S262C/S262W Indoor 4Analog Input,12bits,compatiable with 0~20mA, 4~20mA, 0~5V inputs.
S263/S263C/S263W Outdoor
Notice *GPS Function is optional.ã??*Outdoor model waterproof class is IP67.
*C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA.
1. Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication;
2. Programmable by SMS Commands or PC Configurator via USB;
3. 2 alternate Server via GPRS/3G wireless network, supports IP address and DNS;
4. Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS;
5. GPS module is optional, measure the Longitude,Latitude,Speed,Direction ;
6. Daily report, schedule upload, event upload;
7. 6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status;
8. One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events;
9. 4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center;
10. Internal memory, can save the historical data for review;
11. External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers;
12. Rechargeable Backup Battery inside can last 18hours;
13. Standard DIN Rail 35mm installation or outdoor enclosure.
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automatic
XM452 Temperature Humidity Controller for Incubator With Indicators Thermometer Hygrometer Automaticpower supply :DC 12V Temperature measurement range:- 40~120? Humidity range?0~100%RH Control precision?0.1? 0.1% RH Test probe?Integrated sensor output:10A delay Size:65*55*28mm
temperature control: 1. Set the temperature + ?Normal display mode, long press the + key for 3 seconds, start temperature numerical flashing, press the + / - key setting values, wrong operation after 5 seconds, automatically return to detect temperature display 2. Set the temperature ?- Normal display mode, long press - button for 3 seconds, stop numerical flashing temperature, press the + / - key set value 3. Restore the factory Settings:- At the same time long press temperature, and humidity
Set the start temperature:Long press the + key, start the flashing temperature, set start temperature by + / - key set Stop temperature:- long press - button, stop flashing temperature, set stop temperature by + / - key
Humidity Settings: Set to start humidity: long-press the + key, start the humidity value flashing, set by + / - key launch humidity value Set stop humidity:- long press - to stop humidity value, set by + / - key to stopping the humidity value Fault code:- display LLL means the sensor fault display HHH mean Test temperature exceeds the range of measurement
