Sincerely thank you for buying our ultrasonic l level meter.
The meter includes several proprietary technologies, is safe and clean, with high precision and long service life, stable and reliable, and convenient to install and maintain, and is applicable to various fields of acid, alkali, salt, anticorrosion, and high temperature.
The meter can be connected to display meters or various DCS systems through 4~20mA or RS485 (Agreement Modbus or other custom agreements), to provide real-time level data for the operation of industrial automation.
The meter is with following features:
For circuit design, high-quality power modules are selected to be as power supply parts and highly stable and reliably imported devices are used as components of the meter. It can fully replace imported foreign meters of the same type.
Patent sonic-wave intelligent technology software can make intelligentized echo analysis. It needs neither debugging nor other special steps. This technology has functions of dynamic thinking and dynamic analysis.
Our sonic-wave intelligent patent technology greatly improves the meters precision, and the precision of level is up to 0.3%, which is enough to resist various interference waves.
The meter is a non-contact one and does not directly contact , so the fault rate is low. The meter can be installed in several different ways, and the user can calibrate the meter according to the Manual.
The meters all input and output lines must be with such protection functions as lightning protection and short circuit prevention.
One Touch Ultra Test Strips are for use with the One Touch Ultra and OneTouch UltraSmart Meters for quantitatively measuring glucose in whole blood. Fast test time of 5 seconds.
OneTouch Ultra Test Strips are for blood glucose testing with the OneTouch Ultra Family of Meters, and the InDuo Systems.
Tiny blood sample (1 microlitre)
End-fill strip automatically draws in blood
Indicator window shows when you have enough blood
Touchable strip
Easy-open flip-top vial for use with the One Touch Ultra brand and InDuo meters only.
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
20 years NDT experience,ISO, CE & RoHS certificated, this is how we keep superior quality and competitive offers for global valued customers
This instrument can be widely used in the fields such as manufacturing, metal processing, chemistry and business inspecting for measuring the thickness of all sorts of materials where ultrasonic wave can spread through with a constant speed and get the reflection from the back side
The hand held flow meter is a battery-powered ultrasonic flow meter with the capability of a full-size flow meter. It is carefully designed for portability and ease of use.
The hand held flow meter is based on clamp-on transit-time flow measurement principle. It measures the flow rate of liquid in a pipe from outside of the pipe by using a pair of ultrasonic transducers. In general, the liquid should be full in the pipe, and should contain very little particles or bubbles. Examples of applicable liquids are: water (hot water, chill water, city water, sea water, etc.); sewage; oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.); chemicals (alcohol, acids, etc.); waste; beverage and liquid food, solvents and other liquids.
Due to the nature of clamp-on technique, the transducer installation is simple and no special skills or tools are required. Besides, there is no pressure drop, no moving parts, no leaks and no contamination.
The hand held flow meter utilizes our proprietary technologies such as advanced signal processing, low-voltage transmitting, small signal receiving with self-adapting, and etc. It also incorporates the latest surface-mounting semiconductors and mini PCB design techniques. The built-in rechargeable Ni-H battery can work continuously for more than 10 hours without recharge.
Features
0.5% of linearity Wide pipe size range
0.2% of repeatability 100 Pico-second time measurement resolution
1% of accuracy at velocity above 0.6ft/s. 0.5 second totalizing period
0.5% when on-site calibration is Built-in data-logger
available Clam-on transducer. Easy to install and to maintain
Bi-directional measurement Light weight, portable. Main unit 1.2lbs.
4 flow totalizers Also able to be used for long-term deployment
Proprietary low-voltage transmission
technology
Ethicon is a well-known medical device company, and Harmonic devices are commonly used in surgical procedures for cutting and coagulating tissue. Harmonic devices use ultrasonic technology to provide precise and controlled cutting and hemostasis during surgery.
Here are some general features that you might find in a Harmonic device, such as the ETHICON HARMONIC FOCUS SHEARS:
Ultrasonic Technology: Harmonic devices use ultrasonic vibrations to cut and coagulate tissue simultaneously.
Focused Energy: The "Focus" in the name may indicate a focus on delivering energy precisely to the target tissue.
Handpiece: Ethicon Harmonic devices typically consist of a handpiece that the surgeon operates during the procedure.
Blade Design: The shears are likely to have a specific blade design optimized for cutting efficiency.
Application: Harmonic devices are often used in various surgical specialties, including general surgery, gynecology, and urology.
Our Electromagnetic Flow Meter accurately measures the flow rate of conducting liquids or slurries flowing in closed pipes. Due to simple and right design the Electromagnetic Flow Meter is an obstruction-less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of "Pulsed DC" technology offers highest ability & better measuring accuracy in form of 4-20 mA DC linearly proportional to volumetric flow
Features :
Size DIN 10 to DIN 3000 NB pipe line.
High Accuracy better than + 0.5% of reading.
Zero pressure drop.
Suitable for high viscosity conductive liquids.
Digital flow rate / Totalizer Indication / Batching system
Isolated Transmitting Output 4-20 mA.
No Grounding Rings require.
Minimum Upstream & Downstream straight length.
Compact & Rugged, IP 65 protection.
Remote flow indication totalizer / Batching system
Data Logging & Wireless Data Transfer System through GSM Modem
Applications :
Effluent Treatment Plants.
Sewage Treatment Plants.
Water supply schemes.
Steel & aluminum.
Pulp & Paper.
Chemical & Fertilizers.
Food & Drug.
Pumps & valve calibration lab.
Dairy Industry.
Corrosive liquids.
Sugar industry.
Sugar Industry.
Textile and printing textiles
Hotels & Resorts
Water parks
Buildings & Infrastructure
Municipal corporation
