Model: IRA-HP58/1.8-OEM12 Color: Custom made Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.0 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.9Mpa Solar collector tube: 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe Thickness of glass tube: 1.6mm Vacuum tube tightness: P0.005 Pa Absorption: as=0.93-0.96(AM1.5) Emission ratio: µh=0.04-0.06(80C±5C) Idle sunning property parameters: Y=220~260m2.C/KW Average heat loss coefficient: ULT=0.6~0.7W/(m2.C) Bracket: 1.0mm thickness of galvanized steel material Structure of tank: 4 holes for PT valve,water inlet and outlet,Mag Rod Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 1.124m2 Heat pipe size: Dia14mm x 70mm length condenser,170cm length in total Heat pipe material: TU1 copper Heat pipe power: >120W/pcs Temperature tolerance: from -35C to 250C Tube quantity: 12 tubes Other Tube quantity: 8/10/12/15/18/20/24/30/36 tubes Tank capacity: 150L Other Tank capacity: 80/100/120/150/180/200/240/300/360L Heat pipe pressurized solar water heater features: 1.Adopts the best conduction performance metal- heat pipe (copper). 2.Can be used all year round in the cold climate. 3.High efficiency, rapid warming. Heat pipe in vacuum tube could transfer hot energy to cold water in pressurized solar water heater tank rapidly. 4.The whole pressure of the system is up to 1.5kg/M2, the inlet could connect the tap water directly, the max pressure can be 0.6Mpa. 5.No water in the tube, one tube broken don't influence the system working. 6.The design for inner tank is reasonable and scientific, which could hold 100, 000 times fatigue test without any damage. 7.Dual-purpose brackets for both flat and inclined roof. 8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out. Pressurized solar water heater working principle: 1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure. 2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot. 3.No water in the heat pipe makes the whole system could bear pressure.
Electric / Gas water heater is designed and fabricated for both domestic & commercial installation. It can supply hot water for bathtub, basin, shower, washing machine, kitchen etc. water heater use heating elements from Italy. We provide 100% guarantee for high quality workmanship. electric water heater is available different size from 06-100 gallon (25 - 450 liter) & gas heater is available different size from 20 - 150 gallon ( 90 - 675 liter). electric water heater are both wall & floor mounted type. A unique characteristic of heater is its consumption of low power.
Description: OEM Flat panel solar water heater Color: Custom made Size: 2mx1m Material of out tank: 0.31mm thickness color steel/ fluorine carbon steel Material of inner tank: Food grade 1.2 mm thickness SUS304 stainless steel Tank insulating layer: 50mm thickness, 45kg/m3 high-density polyurethane foamed Inlet and outlet hole: Female G 3/4 Max pressure: 0.6Mpa Flat panel solar bcollector Dimension: 2000x1000x80mm Absorber material: Selective balck chorme/Blue coating Head pipe: Copper/Φ22x0.6 Branch pipe: Copper/Φ10x0.5 Quantity of Branch pipe: 7PCS Welding: Laser welding Cover: Low iron tempered textured glass Frame: Anodised aluminium alloy Insulation material: Rock wall Bracket: 1.5mm thickness of galvanized steel material,25degree. Structure of tank: 8 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor.Heat exchange inlet and outlet Welding: Argon arc welding Fastening pieces: Made of stainless steel screw Absorber area: 2m2 Temperature tolerance: from -5C to 250C Tank capacity: 150L Quality features, certificates 1.High level of efficiency due to Sunselect coating on the absorber. 2.Low energy loss thanks to excellent thermal insulation. 3.Suitable for on?roof and flat?roof assembly Installation: vertical, side by side. 4.Robust aluminium frame for maximum durability. 5.Highly reliable with long useful life due to the use of high quality, corrosion?resistant materials. Glass covering made from 6.low iron solar glass.
Type of the device water outlet controlled instant water heater Combustion voltage 220 240 v ac Frequency 50 60 hz. Combustion power 7 kw Min. Workable water pressure 3 mss Rate of flow 90 240 liters / hour Dimensions 35 cm x 23 cm x 11 cm Net weight 1, 6 kg Packing size 50 cm x 37 cm x 50 cm (6 pckgn / box)
Water heater Electric storage water heater 5l, 10l, 20l, 30l, 40l, 50l, 60l, 80l - 1, 5kw.
Water heater Epp-36 maximus water heater is designed for industrial use. It has its application in places where a considerable amount of hot water is needed, e.G. An assembly line. Water temperature modulation from 30°c to 60°c Electronic power modulation depending on the flow of water Starts work at such low flow rate as 2, 5 l/min and the minimal pressure of 0, 1 mpa Larger heating box and bigger surface of heating elements ensure longer life
capacity:6L-20L gas type:LPG or NG
1)temperature can be adjusted. 2)the heater adopts ss heating tubes, warming up rapidly. 3)various kinds of stainless steel or carbon steel electric water tank heaters are adoptable according customers' requirements. As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Various Various
Solar water heater 1 pressurized inner tank: stainless steel sus304f¼1.2mm 2 vacuum tube: qb-al-n/al-58-1800 3 outer tank: painted steel-0.4 mm, stainless steel sus304-0.4mm 4 frame: coated galvanized steel sheet-1.5mm;stainless steel sus430-1.5mm. 5the material of insulation:polyurethane 55mm 6 the reflector:aluminum component : al 99.85% surface oxidation. Characteristic: 1 it takes the advantage of the tap waterf+s pressure.More pressure, more comfortable. 2 the water can be heated rapidly, so it can produce the high quality hot water. 3 it can produce more hot water than the general types because it isnf+t restricted by the volume of the tank. G.W. 89kg