Size: FY400(48X48 mm), FY600(96X48mm), FY700(72X72mm), FY800(48X96mm), FY900(96X96mm)
Supply voltage: AC 85-265V, DC 24V
Frequency: 50/60 Hz
Memory: Non-volatile memory E PROM
Input: Universal
Thermocouple - type K, J, R, S, B, E, N,T , W5Re/W26Re
RTD - DPT100, JPT100, JPT50
mA dc - 4-20mA, 0-20mA
voltage Dc - 0-1V, 0-5V, 0-10V, 1-5V, 2-10V, -10-10mV 0-10 mV, 0-50mV, 10-50mV
DP position: 0000, 000.0, 00.00, 0.000 (available for mA or Voltage dc input).
Output:
Relay: SPST or SPDT Type 3A, 220V electrical life 100,000 times or more(under rated load)
Voltage Pulse: for SSR, On: 24V Off: 0V maximun load current 20mA
mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms
Voltage DC: 0-5V, 0-10V, 1-5V, 2-10V Maximum load current 20mA
Alarm: SPST or SPDT type 3A, 220V electrical life 100,000 times or more (under the rated load)
Control Algorithms: PID, P, PI, PD On/Off (P=0), Fuzzy
PID range P= 0-200%, I=0-3600 secs, D=0-900 Secs
Isolation: Output terminal ( control output, alarm, transmission) and input terminal are isolated separately
Operating Temperature: 0-50 deg C
Humidity: 20-90% RH
Optional Specs
RAMP/SOAK program : 2 patterns with 8 segments each, the 2 patterns can be linked together as 16 segments use
Output 2:
Relay: SPST or SPDT Type 3A, 220V electrical life 100,000 times or more(under rated load)
Voltage Pulse: for SSR, On: 24V Off: 0V maximun load current 20mA
mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms
Voltage DC: 0-5V, 0-10V, 1-5V, 2-10V Maximum load current 20mA
Alarms capable up to 3 alarms
Heater Break Alarm: Display range of Heater Current: 0.0-99.9A Accuracy 1%FS
Included CT; SC_80_T (5.8mm dia, 0.0-80.0A) or SC_100 12mm Dia, 0.0-99.9A)
Alarm Relay AL1
Transmission: Available for PV and SV transmission
mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms
Voltage DC: 0-5V, 0-10v, 1-5V, 2-10V maximum load current 20mA
Remote SV Input: 4-20mA, 0-20mA 0-5V 0-10V, 1-5V, 2-10V are available
Communication: Protocol: MODBUS RTU, MODBUS ASCII, TAIE
interface: RS232, RS485, TTL
Baudrate: 38400, 19200, 9600, 4800, 2400 bps.
8 bit, start bit: 1bit, Parity : ODD or even stop bit: 1 or 2 bit
WaterProof/Dustprof: IP65.
Features: Designed for industrial application. Resistant to high temperature and high pressure.
Sensor type: Capacitive Humidity Sensor & Pt 100 A class
Measuring range: 0 . +180C
Output: 0 . 20 mA / 4 . 20 mA / 0 ... 10 V
Accuracy: Temperature 0.15 C / Humidity 2%RH
IP rating: IP65
The handheld roll gap checker is specially used to measure the length between spherical surface, arc surface and plane (or spherical surface). It is specially suitable for the opening adjustment of the roll gap of the metallurgical continuous casters in various specifications, because the roll gap checker has the advantages of high resolution, accurate measurement, stable data and easy to use. Because the opening accuracy of the roll gap checker will directly affect the quality of the casting block, this roll gap checker is an indispensable testing equipment in the continuous casting equipment, which can fully meet the needs of on-site installation testing and use process verification. When the hand-held roll gap meter smoothly passes through the gap between the guide rolls of the continuous casting machine, the upper measuring contact of the hand-held roll gap checker contacts the inner arc roll and the lower measuring contact touches the outer arc roll. The handheld roll gap checker is used in perpendicular to the roll diameter direction, during the pushing process, when the hand-held roll gap meter is in the tangent plane of the upper and lower rolls, the measured value is the smallest at this time, and this value is the roll gap measurement value. The design of the hand-held roll gap gauge ensures that the upper and lower contacts of the roll gap checker can smoothly pass the measured roll along a straight line during measurement.
During the measurement process, the roll gap measuring instrument automatically compares the measured values, and displays the minimum measured value on the instrument display interface, which is the current measured roll gap value.
The technical parameters
1. Measuring range of instrument type handheld roll gap checker: 180mm - 400mm (the range can be customized)
2. Measuring range of digital hand-held roll gap checker: 120mm - 400mm (the range can be customized)
3. Measuring range of hand-held thin slab roll checker : 60mm - 150mm (the range can be customized)
Mini Portable Soldering Iron With Constant Temperature Controller
Constant temperature Soldering iron based Intelligent automatic temperature controller, and other components, the button on the handle directly thermostat, LCD temperature display with speed heating, precise temperature control, no leakage in the form of design, in addition to static,feel light, nice advantages. Protection during welding board and improve the reliability of the circuit elements, it has particularly excellent
Description :
Power supply voltage: 220V 50Hz
Max Power: 50W
Meet the impressible temperature requirement
Lead-Free welding tip
Microcomputer intelligence temperature controller
With constant temperature controller, 30
Ceramics heat core
Supplier: Temperature / pid controllers, thermocouples, control panels, temperature transmitters, heaters & heating elements, rtd assemblies, furnaces, ovens Services: Calibration of temperature mesure & control instruments & service
