* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
T-pav903 serie: valve body:stainless steel, valve connection:screwed, valve way:2/2 and actuator double acting or single acting types.
Da:actuator double acting , sr:actuator single acting .
Application:water, air, hot water, steam, oil, aggresive media, gas, foot industry, chemical industry,
Tork actuator features body extruted.Aluminium, hard anodized
Caps die cast aluminium, electrostatic painted
Pistons die cast aluminium
Supp.Air 4-6 bar
Ball valve body full borei, aisi 316 stainless steel and 3 parts body
Way: two way.
O-ring ptfe
Pressure suitable low and high pressure.
Temperature -20....140 c degree
Working pres. Pn 40 bar(1/2"..11/4") , 16 bar(11/2"...3")
Test bntnall valves are tested 48 hour, at 20 barda
Europe is a leading manufacturer of pneumatically operated ball valves in . For its operation, a pneumatic ball valve is paired with a pneumatic actuator. It's a tough valve that shuts off perfectly. It can also be employed for fine media flow in throttling applications. Europe offers high quality Pneumatic Ball Valves with a long service life. This type of valve ensures a secure shutdown.
Features of Pneumatic Actuated Ball Valve
It has both sides seals coated with internal balls and can deliver tight cut-off even after years of operation, according to Pneumatic Actuated Ball Valve features.
The ability to open and close quickly.
The actuator is small.
Are you seeking for a reputable manufacturer of pneumatic ball valves
With our manufacturing facility and warehouse in , we are one of the leading pneumatic ball valve manufacturers in . We are primarily concerned with achieving complete customer loyalty through the provision of dependable, high quality industrial valves. We produce valves that are cost effective without sacrificing quality.
Available materials CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316
Class 150 to 2500
Nominal Pressure PN6 to PN450
Size 12 to 48
Ends Flanged, Buttweld, Socket weld, Threaded.
Operation Pneumatic Actuated
For more details visit here: https://www.valvesonlyeurope.com/product-category/pneumatic-actuated-ball-valve/
Pneumatic valve actuator description:
14 types ( da 32- da 270 ).
Offering a broad range of pneumatic rack & pinion actuators.
The ports are namur standard for easy solenoid valve connection.
Iso 5211 dimensions on all sizes.
All internal and external surfaces are anodized for corrosion resistance.
Actuator have a regulation range from-4° to +4°.
Shaft bearings isolate the pinion gear from the housing and support the shaft for high cycle.
Actuator can be lifted on many styles of quarter-turn valve, including ball, butterfly and plug and dampers.
Pneumatic valve actuator operation:
Working pressure: 2.5 bar – 8 bar.
Working temputure:
Standard range: -20? - +80?.
Low temperature range: -40? - +80?(hnbr).
High temperature range: -20? - +150?(vition).
Factory lubricated for life under normal vorking.
Operating media – dry or lubricated air, non-corrosive and inert gas or light hydraulic oil.
Angle of rotation: 0° to -90°± 4°.
China Pneumatic Actuated Ball Valve
The pneumatic 3 way ball valve from UTMOST pneumatic ball valve factory can be used under extremely harsh application conditions, such as high temperature, high pressure, high frequency, abrasion, corrosive medium, and crystalline medium. The stainless steel pneumatic ball valve has its own characteristics and advantages, such as short opening and closing time, stable torque, long service life and reliable sealing which can ensure free opening and closing. UTMOST pneumatic ball valve factory is one of professional pneumatic ball valve manufacturers. If you want to know the pneumatic ball valve price and get oem ball valve, please contact us.
Pneumatic Actuated Ball Valve Technical Specification
Size: From 2" up to 24â??
Body material: Carbon Steel, Alloy Steel, Stainless steel,
Nickel-based High-temperature Alloys, Titanium Alloys, etc.
End connections: Flanged(FF, RF, RTJ)
Pneumatic ball valve working pressure: From Class150LB to Class2500LB
Standard compliance: ASMEB16. 10, ASMEB16. 34, ASMEB16.5, API 6D, API 608
For more other valve control system specifications request, please contact with Utmost china valve factory.
What is the Difference between Pneumatic Ball Valve and Other Valves?
UTMOST pneumatic ball china valve factory's actuator operated ball valve compared with gate valves, stop valves, and our wholesale butterfly valve, the medium flow resistance is extremely low. The valve can be driven by pneumatic, electric, hydraulic, gas-liquid linkage, electric-liquid linkage, manual, etc. Utmost has its own brand of pneumatic actuator, and can also select the brand and structure of actuator according to the customers' requirements.
Pneumatic Actuated Ball Valve Datas
Technical Performance of Pneumatic Control valve Ball Valve
Structural Style BAã?»F, BA-S, BA-P
Nominal Size DN/NPS NPSl/4 (DN6> â?? NPS24(DN600)
Nominal Pressure PN/ANSI Classl50 (PN20) â?? Class2500 (PN420)
Applicable Temperature -196�°C â?? 816�°C
Valve Housing Material Carbon Steel, Alloy Steel, Stainless steel,
Nickel-based High-temperature Alloys, Titanium Alloys
Valve Structure 2/3 Piece Type, Cast/Forged
Suitable Media Oxygen, Hydrogen, Slag Water, Cinder
Actuator Type Pneumatic Rack and Pinion Type, Pneumatic Fork Type, Electric, Electro-hydraulic, Gas-hydraulic
Seal Test Standards API 598, MSSSP-61, ISO 5208, ANSI/FCI 70-2
Reference Standards ASMEB16. 10, ASMEB16. 34, ASMEB16.5, API 6D, API 608
Model no.: 4v220-08
Connection form: thread
Material: aluminum
Valve structure: direct-acting piston structure
Usage: flow control
Application: industrial usage, household usage
Operation type: inside pilot type
Position and way number: two/three position five way
Proof pressure: 1.2mpa(174psi)
Port size: air inlet=air outlet=exhaust=g1/8
Shortest excitation time: 0.05 second
Transport package: in cartons, plywood cases, pallets
Actuator: pneumatic
Type: direct acting
Standard: gb
Fluid medium: 40 micron filtered air
Working pressure: 0.15--0.8mpa(21--114psi)
Working temperature: 5--50 degree celsius
Highest action frequency: 5 cycles/second
