Harness the power of the sun with our cutting-edge Solar Products viz. solar panels, solar Photovoltaic modules (PV modules), Mono Crystalline, Poly Crystalline, grid tied, off grid, hybrid and solar water heater system include storage tanks and solar collectors. Discover eco-friendly solutions for energy generation and consumption, paving the way for a sustainable future.
Solar Syetem
Free-energy high pressure stand alone model is a new type of solar water heater
which adopts advanced heat pipe and all glass vacuum tube technology. High
efficient vacuum tube absorbs heat to the condenser end of itself. Condensor
indirectly contacts with water through a copper cap and it boils water by
releasing heat gained from vacuum tube. The available size of the tank ranges
from 150L to 500L. It has the following features:
1. High pressure storage tangk ( testing pressure = 9bar )
2. No vent and less heat loss as compared to low pressure model
3. Highly efficient heat pipe technology
4. No water introduced into vacuum tube
5. No sealing rubber is needed and hence no leaking problem
6. Easy plug-in installation
7. Freezing resistance
WHOLE PACKAGE
we have solar keymark-En12976 certificate
whole packaging
21 sets fit in a 20" container
43 sets fit in a 40" container
This system consists five parts: solar collector, work station, expansion vessel, pressurized tank and controller.
This system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water.
The system operates at a standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with exsiting system.
Solar heating system
1) once heat-exchange system
2)twice heat-exchange system ( single copper coil )
3) twice heat-exchange system ( double copper coil )
Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.
Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising.
Inner tank material: sus304-2b imported food-grade stainless steel.
Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate.
Heat insulating layer: 50-65mm polyurethane integral pressure foaming.
Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of color is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly.
Agni Solar water heaters are a blessing, because not only do they provide instant hot water on demand, but they also reduce your electricity bills significantly.
Now you can get hot water during non-sunny days too, because the insulated storage tank can be fitted with an optional heating element which will allow the system to function all-year-round. http://agnisolar.com/products/solar-water-heating-system
Features:
1) power supply: ac 220v +/- 10%
2) power consumption: < 5w
3) accuracy of tested temperature: +/- 2 degressc
4) range of temperature to be tested:0 - 99 degree c
5) power of controllable cycle pump: <500w
6) creepage protection of electric heater:10ma, 0.1s
7) power of electric heater:1, 500w
8) electromagnetic valve: dc 12v, working pressure:
(1)without tank:0.02mpa - 0.8mpa
(2)with tank:0.0mpa
Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ
Products intro
Sc-b01
Pipeline is made of all red copper and conducted by heat transfer medium liquid
To save place and simple to install
Suitable for families who can not put vacuum tubes on their roofs
Stable and reliable performance
Fashionable and beautiful
It is harmoniously blended with architecture
Environmental protection and energy saving
* material
A) inner water tank: imported sus304 stainless steel
B) outer water tank: galvanized steel alloy
C) bracket: aluminium alloy
* solar vacuum tube with heat pipe
A) size: 58 x 850mm
B) qty: 8 / 10 / 12pcs
C) hail resistance: diameter 25mm
* temperature insulation layer
A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam
B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters
* max. Pressure bearing: 0.6mpa
* iso9001 / ce certificate/en-12975
* 3 years international responsibility for free repairing or exchange due to original quality problems
Millionsunâ??s solar flat plate thermosyphon integrating system is composed of solar flat plate collector, pressurized water tank, bracket, circulation pipe and accessories.Due to thermosyphon principle, the collector absorbs solar energy to heat the water inside, while the thermosyphon circulation inside enables the heated water to flow into and be stored in the water tank.
Millionsun split solar forced circulation heating system flexibly integrates flat plate collectors, water tanks and control system, forming a heating system with closed loop forced split circulation, which is applicable to both house hold and large scale hot water projects, such as hospitals, hotels and schools.This system operation Automatic control and operation,safe and convenient.
Features:
Stylish slim line design.
Forced circulation operation minimises maintenance.
Electric booster models available.
Inner tank with vitreous enamel or SUS304.
Durable coating for protection inside tank.
