Recycled PolyethylenePE or Recycled PolypropylenePPoften contains some moistureif not eliminated, the moisture will produce drain marks or bubbles on the surface of the final products while processing, besides quality affected, the moisture even cause impossibility of processing. Plastic desiccant masterbatch DM25 is a new type of functional masterbatch developed to eliminate the moisture of recycled PE and recycled PP. With adding a small rate of DMB25by mixing with materialit can absorb the moisture during production process and save drying process. DMB25 is environment-friendly and can save production time, energy and cost. Carrier PE Addition rate 1%-10% Color White Gray Application Flim, injection molding Density 1.75+/-0.1g/cm3 Certification SGS, RoHS,FDA Model Number DM25 Warranty an half of year Item Name Desiccant masterbatch Function absorb moisture Size Dim2.5mm Thickness 1.0mm MOQ 5 ton Moisture Absorbent Content 20%-25% of masterbatchs' weight Packing 5kg/vacuum bag,25kg/carton(bags MFI(g/10min) 15.5-25.0 Port Huangpu/Guangzhou Usage 1. Check the condition of inner packing and forbid using if breakage. 2. Adding rate:1%~10% 3. Mixed with the raw material. 4. Do not heat with recycle material
Specification: Appearance : granule pellets Colour : Black MFI[21.6kg/190] : 13g/10min Migration resistance(level) : 7 Melting point : 110 Heat resistance(level) : 6 Water ratio(%) : 0.15 Light fastness(level) : 8 Density(23) :1230kg/m3 Heat stability : 280 Composition: Carbon black content: 45%±2 Carrier: PE Filler: None Use: Compatible polymers: HDPE, LDPE, LLDPE, PP, PO, PVC, PA, AS, PS, ABS...etc. Recommended application: pipe, extrusion, injection, blow moulding...etc. Recommend addition rate: 1-5% subjected to the final products requirements. Addition method: direct addition or premix in blender. 2014A is available in 25kg/bags, Plastic PE bag or Paper bag.
Request White masterbatches for: Blown film Blow molding Cast film Extrusion Injection molding Rotational molding Thermoforming Color White Ingredients Active: 25%, 50% , 60%, 70%, 75% Carrier: LDPE Dosage 0.5 to 8% depending on the end application Lifetime & Storage 12 months Storage in very humid areas or under direct sunlight for long periods should be avoided
Supplier: Black masterbatch, white masterbatch, colour masterbatch, desiccant masterbatch, filler masterbatch, anti-block masterbatch, anti odor masterbatch, anti UV masterbatch