Calcium Polysulfide Solution is used mainly as a fungicide and fertilizer for the agriculture industry, to control wide range of fungal and other plant diseases in orchards, field crops and horticulture crops; it can also be used in various treatment systems as a metal precipitating agent. Calcium Polysulfide Solution effectively stabilizes and reduces soluble metals.
Sales Specifications
Appearance: Clear, to red orange liquid
Assay:24.0-29.0%
Odor:Slight H2S odor
Density:1.25-1.29 @ 25�°C
Treatment Notes
Arsenic: Acid medium only forms various arsenic sulfides; pH>7; arsenic-sulfur compound are insoluble
Lead: Wide Range (pH: 4-9); forms lead sulfide
Copper: Close to neutral (Optimal pH: 5â??7); forms copper sulfide
Zinc: Wide range (pH: 4-9); forms Zinc sulfide
Cadmium: Wide range (pH: 4-9); forms cadmium sulfide
Molybdenum: Wide range (pH: 4-9); forms molybdenum sulfide
Uranium:Wide range (pH: 4-9); forms uranium sulfide
Cyanide: Chemical Conversion produces Thiocyanate*
*Thiocyanate can be bio-treated, or it can be treated with lime, producing calcium carbonate, gypsum and ammonia. Chromium (Cr VI) can be treated with calcium polysulfide, and the Cr(VI) is reduced to Cr (III), which is then precipitated as chromium hydroxide.
While the list above indicates effective treatment may be obtained with system pH near 4.0, TKI has found that product is most stable in systems with pH greater than 5.0, to avoid potential generation of H2S.
Packing
220 gallon (2,809 lbs) tote or 5,000 gallon (53,000 lbs) tank of truck
901 Lb tote
Specifications
Total Al2O3 (%w/w) : 8.2-8.3
Total Al2(SO4)3 (%w/w) : 27.9%
Free Acid (as H2SO4,%w/w) : 0.0
Free Alumina (%w/w) : None
Fe2O3 (%w/w) : <0.35
Specific Gravity (15C) : Report
Insolubles (%w/w): < 0.2
Crystals (23C) : None
Color :Yellow to Water White
Clarity: clear to slightly opaque
Product Description : Colorless solution free of suspended or undissolved solids. Meets ANSO Specifications.
Packing
605 LB Drum, 4 drums per pallet
DOT Transportation
UN Number : 3264
Proper Shipping Name: Corrosive liquid, acidic, inorganic, n.o.s. (Aluminum Sulfate)
Hazard Class : 8
Packing Group : III
Ferrous chloride, solution is the greenish-white crystalline solid dissolved in water. It is used in pharmaceutical preparations, for sewage treatment, and as a mordant (which fixes dyes so that they will not run) in textiles. It serves as a coagulation and flocculation agent in waste water treatment as well as odor control. It is also used as a precursor to make various grades of hematite that can be used in a variety of pigments. It is the precursor to hydrated iron (III) oxides that are magnetic pigments.
Sales Specification
Appearance: Green to Dark Color Liquid
Ferrous Chloride(FeCl2): 18% -32%
Fe(II): 8%-14%
Typical Analysis
Ferrous chloride as FeCI2: 28.0%-30.0%
Specific Gravity @ 68 F: 1.312 g/ml
Free Acid: 0.50%Max
Ferric Chloride as FeCI3: 3300 ppm Max
Packing
In 2995 LB Tote
DOT Transportation Information:
UN No.:UN1760
Proper Shipping Name: Ferrous Chloride, Solution
Hazard Class: 8
Packing Group: II
RQ
The Reportable Quantity (RQ) under CERCLA is 100 lbs
Automatic dough rolling machine for any wheaten flour food process necessary machine ,Automatic cycle folding powder spreading for process wheat food ---noodle /bread /pizza /dessert and so on all over the world ,sanitary ,save labours ,high efficient ,food factory machine .Delicious wheaten food process machine .Different capacity,low cost good quality .
Glycolic acid is a colorless, odorless liquid and the smallest I±-hydroxy acid (AHA). It is used to manufacture adhesives, dye, print, medicines, and crease-proof textiles. Glycolic Acid is also used in leather dyeing, as a tanning agent, in detergents, welding agent, adhesives, plastics, oil well acidification, electroplating, copper pickling, printed wire board flux, soldering products, etching lithographic plates, iron chelating, chemical milling, metal cleaning and demulsifier. Glycolic acid is often included into emulsion polymers, solvents and additives for ink and paint in order to improve flow properties and impart gloss. It is used in surface treatment products that increase the coefficient of friction on tile flooring. It is the active ingredient in household cleaning products like Pine-Sol. Glycolic acid is an outstanding choice for a broad range of cleaning applications due to its dual functional groups, hydroxyl (OH) and carboxyl (COOH). The dual functionality enables exceptional cleaning performance for mineral and hard water scales.
Sales Specifications
Total Acid: 70%-72%
Color Gardner: 3 Max
Turbidity, ntu: 6 Max
Formic Acid: 1% max
Sulfates as S04: 800 ppm Max
Iron: 50 ppm Max
Appearance: Clear to Light Amber
Packing
Applications
Aluminum Chlorohydrate (ACH) is used as a flocculant and used as a coagulant in water purification. It can also be used in the Paper industry as a Sizing agent (AKD) of the precipitation agent, Size adhesive, Anionic garbage removal agent, Retention aid agent and filter aid agent and as additive for controlling resin obstacles.
Applications
Aluminum Chlorohydrate (ACH) is used as a flocculant and used as a coagulant in water purification. It can also be used in the Paper industry as a Sizing agent (AKD) of the precipitation agent, Size adhesive, Anionic garbage removal agent, Retention aid agent and filter aid agent and as additive for controlling resin obstacles.
