Tensile Strength
MPa Yield Point
MPa Elongation
Impact Temp
Impact Value
Requirement :500 ¡Y420 ¡Y22 -30 ¡Y27
Real Parameter 550 455 28.2 -30 79.1
black good plastic spool(the spool dia is 270mm), precisely winding with water-proof paper, wrapped by plastic film and silica gel, and then a white neutral carton box, at last by pallet(72cartons per pallet,3*4*6).
This products have been approved by abs / ccs / dnv / kr / nk / gl / lr, and tuv / ce / db.
Description:
·ly er50-6 is a low alloy steel gas shielded welding wire, protected with pure co2 or ar+co2 gas.Stable arc, low spatters, excellent fabrication weldability and lowsensitivity of weld gas porosity can be obtained during welding.It is suitable for all position welding especially with large welding current range.It can show very good welding performance.
Applications:
·suitable for single-pass and multi-pass welding for structures fabricated by carbon steel and 500mpa grade low alloy steel, such as vehicles, bridges, construction and mechanical structures etc.
Instructions:
A.Suitable for using shielding gas at the speed of 20-25 liters per minute.
B.Windshield must be set up in the welding zone, due to gas porosity may be caused by strong wind.
C.Wire extention should be 10-20mm if the current range is under 300a and if above 300a, 20-25mm.
Chemical composition of wire(%)
CMnSiSPCuOthers
Standard(gb)0.06-0.151.40-1.850.80-1.15?0.035?0.025?0.50?0.50
Standard(tuv/ce)0.06- 0.141.30-1.600.70-1.0?0.035?0.025?0.35?0.50
Type0.081.510.920.0200.0160.200.02
Mechanical proper ties of deposited metal
Tensile strength?bmpa)Yield point?0.2(mpa)Elongationd5(%)Impact v-notch (j)(-20oc)Shielding gas
?500?420?22?27100%co2
56050027102100%co2
Specification & recommended current range(dc+)
Diameter(mm)
F0.8 f1.0 F1.2 F1.6
F current(a)40~18050~22080~350170~550
V current(a) 40~14050~16050~180
Oh current(a) 40~12050~16045~180
Specification: f0.6mm/f0.8mm/f0.9mm/f1.0mm/f1.2mm/f1.6mm
1kg/spool; 5kg/spool; 15kg/spool or as customers's requirements.
Package: plastic spool or metal spool.
1 spool per carton, 72 cartons per pallets.
Shandong zander resourcing company limited is located in zhangqiu , jinan, shandong, china.We are a intergrating r & d and sales of welding materials and service, such as co2 mild steel welding wires, flux cored wires, submeraged arc welding wires, argon arc welding wires, stainless steel welding wires, high strength welding wire, and welding equipments.The engineering products that we offer are dimensionally accurate and are known for their high reliability and durability. These products can be availed in various grades and dimensions as per the requirement of the
Buy Mild Steel Arc Welding Rods At Royal Welding wires. Mild steel arc welding rods are perfect for professional welders. They are made of high-quality materials and are designed to produce quality welds.
Chang de sheng wire mesh co., ltd. Offers welded wire mesh in galvanized iron, stainless steel or pvc coated wire. Welded mesh products are made of high quality wire through automatic process and sophisticated welding technique. The finished products is level and flat with sturdy structure.
Use: welded wire mesh is used in a number of industries, like construction, petroleum, chemical industry, breeding, garden fencing and foodstuff industry.
Assortments available:
Welded wire mesh, hot dipped galv. After welding
Welded wire mesh, galv. Before welding
Stainless steel welded wire mesh
Pvc-coated welded wire mesh
Specification of galvanized welded wire mesh
Mesh 1/4"x1/4", 1/2"x1/2", 3/4"x3/4", 1"x1",
1/2"x1", 1"x2", 2"x2", 2"x3", 3"x3", 4x4",
3"x5", 4"x5"
Wire diameter 2.0mm to 0.60mm
Width 0.4m to 1.8m
Length 15m, 20m, 25m, 30.5m, etc.
Finish hot gal. Or gal.
Features: smooth surface, equal mesh, fastness welded point, stability , adn anti-corrosion.
Wire diameter: 0.3mm-1.2mm
Package£ºwater proof paper packing and the color is gray, yellow or white.
Welded wire mesh panel: wire straighten--cut--welded. Its structure is simple, and producing cycle is short, beautiful and easy to transport and use. Which is widely used in construction, industry, agriculture, transportation, and cultivation.It is also good for fences used in high way, factory, community and park.
Surface: hot galvanized welded wire mesh, electric galvanized welded wire mesh, stainless steel welded wire mesh, pvc coated welded wire mesh.
Plastic inside and hessian woven or gunny outside. If you have special packaging, we can do
Galvanized Steel Wire Welded Roll Mesh Welding Machine for Screen Poultry Plastering Mesh.
Roll Wire Mesh Welder.
Roll Wire Mesh Welder, namely Welded Wire Mesh Machine. Electric Mesh Welding Machine feeds line wire and cross wire automatically, can produce welded wire mesh in form of rolls.
The whole production line of welded wire mesh welding machine, includes wire spools or wire rack, roll wire mesh welder, Mesh repair machine, Mesh repair table, butt welder, electric cutter.
Welded Wire Mesh Machine for Plastering Mesh
Technical Parameter:
Model DP-DNW-1 DP-DNW-2 DP-DNW-3
Wire diameter 0.4-0.65mm 0.65-2.2mm 1-2.2mm/ -2.5mm
Mesh size/ Aperture 1/4", 1/2" 1/2",1",2",3",4" 1",2",3",4"
Working width Max.1.2m,1.5m,2m Max.1.2m,1.5m,2m Max.1.2m,1.5m,2m,2.5m
Motor power 2.2kw 2.2kw/ 4kw 2.2kw/ 4kw
Working speed Max.120 rows/min Max.120-180 rows/min Max.80-120 rows/min
Transformer capacity 50kva*3 60kva*4/5/7 60kva/70kva*5/6/7/8pcx
Weight 1.5T 2T/ 2.5T 2T/ 2.5T/ 3T/ 3.5T
Tips: Machine can be customized for different wire diameter, mesh size, etc.
Welded wire mesh, a versatile and widely used material, goes by a variety of names. First of all, it is known as external wall insulation wire mesh, galvanized wire mesh, galvanized welded wire mesh, and so on. Welded wire mesh is used for plastering mesh, door screen, poultry mesh, animal cage, heat insultation mesh, fencing wire, etc.
Automatic Roll Wire Mesh Welding Machine for Construction Concrete Slab Reinforcing.
BRC Mesh Welder
BRC Mesh Welder, is also name Welded Roll Mesh Welding Machine. The BRC Mesh Welder can produce welded wire mesh in form of sheet and rolls.
Technical Parameter:
Model JW-2000BN JW-2500BN JW-3000BN
Wire diameter 3-6mm 3-6mm 3-6mm
Longitude wire space 50-300mm 50-300mm 150-300mm
Cross wire space Min.50mm Min.50mm Min.50mm
Mesh width Max.2000mm Max.2500mm Max.3000mm
Welding electrodes 40pcs/as your request 48pcs/as your request 20pcs/as your request
Welding transformer 125kva5pcs 125kva6pcs 125kva5pcs
Welding speed Max.75times/min Max.75times/min Max.75times/min
Longitude wire feeding From coils From coils From coils
Cross wire feeding Pre-cut Pre-cut Pre-cut
Overall size 6.931.8m 6.93.41.8m 6.93.91.8m
Weight 5500kg 6500kg 7500kg
Concrete Slab Reinforcing Mesh, a type of welded wire mesh, finds its main applications in construction and infrastructure projects. It is extensively used in multiple scenarios. For instance, in road construction, it helps to strengthen the road surface, making it more resistant to wear and tear caused by heavy traffic. In bridge building, it provides essential reinforcement to bear the weight of vehicles and pedestrians. In tunnels, it ensures the stability of the tunnel walls. Airport runways, parking lots, and industrial floors also benefit from its use. In airport runways, it withstands the impact of aircraft take â?? offs and landings. In parking lots and industrial floors, it offers long â?? lasting strength and durability.
Technical Parameter:
Model JL-1200 JL-1600
Mesh width 1200 mm 1600 mm
Wire diameter 2-4mm 2-4mm
Line wire aperture 50-250mm 50-250 mm
Cross wire aperture 25-250mm 25-250mm
Welding speed 100-150 times/minute 100-150 times/minute
Transformer 125KVA3
(water-cooling) 125KVA4
(water-cooling)
Dimensions 4 X 2 X 1.8 m 4 X 2.4 X 1.8 m
Weight 4500 KG 5500KG
Wire Mesh Welding Machine manufacturers wire mesh fabric. Welded wire mesh can be processed for concrete reinforcing mesh, fencing wire, cable tray, wire shelves, wire basket, poultry cage, etc.
Product Description
Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm
Trade Name: ER50-6
Standard:GB/T 8110 AWS A5.18 ER70S-6
The CO2 mig welding wire manufactured by our company can be applied for all-position welding and it can adapt to the larger electric current range,besides it has many advantages,high arc stability while welding,less spatter,beautiful welding line shape,high deposition rate.Our products are at the leading level in our county in many aspects such as appearance,usability,welding machinery performance and so on.
Applications:
For welding of steel structure in mineral machineries,ships,brides,pressure vessels,building constructions,welding of other 500MPa level carbon steel and low alloy steel and high-speed welding of light gauge plate and pipe line steel.
Advantages
1, Stable arc and less spatter while welding
