The TS-M1021 is a diminutive Bluetooth module, measuring merely 8 by 12 millimeters, designed for applications requiring minimal size and low power consumption, without compromising on cost-effectiveness. This module is renowned for its remarkable stability and wide-ranging compatibility. It comes with a default setting that facilitates Bluetooth serial port transparent transmission, allowing users to modify serial port baud rates, device names, and additional parameters using the supplied AT commands. This feature enables adaptable operation and straightforward implementation, making the module an ideal choice for a diverse array of customer development projects.
Model No.: TS-M1021
Features
Bluetooth Version: BLE 5.1
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+10dBm
Receive Sensitivity: -97dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 100m
Memory: 512KB FLASH+56KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 2.0~3.6V
Operating Temperature: -40~+85
Peripheral Interface: UART/I2C/ADC
Serial Transparent Transmission Rate: BLE 20KB/s
Applications
Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control
The Module Is A Max.4Dbm( Class2 ) Module.
* Fully Qualified Bluetooth V2.0+Edr System.
* Integrated Switched-Mode Regulator.
* Integrated Battery Charger.
* Embedded Kalimba Dsp Co-Processor.
* Integrated 16-Bit Stereo Audio Codec
* 95Db Snr For Dac.
* Enhanced Audibility And Noise Cancellation.
* Integrated With 8M Bits Flash Memory.
* Support Host Interface: Usb Or Uart.
* Support Digital Audio Bus : Pcm, I2S Or Spdif.
* Hsp/Hfp/A2Dp/Avrcp Profiles Support.
* Rohs Compliant.
* Small Outline. 16 X 15 X 2 Mm.
* Applications
* High Quality Stereo Wireless Headsets.
* High Quality Mono Headsets.
* Hands-Free Car Kits.
* Wireless Speakers.
* Voip Handsets.
Bluetooth ver. 2.0+edr certification
Transmit power up to +18dbm(class1)
Low current consumption:
Hold, sniff, park, deep sleep mode
3.0v to 3.6v operation
Full bluetooth data rate over uart and usb
Support up to 7 acl links and 3 sco links
Enhanced data rate(edr) compliant
For both 2mbps and 3mbps modulation modes
Interface: usb, uart&pcm( for voice codec)
Spp firmware with at commands
Rohs compliant
Small outline: 28.2 x 15.0 x 2.8 mm
Application:-
Access point
Domestics and industrial applications
Serial adapter
Gps, pos, barcode reader.
* Maximum of 4dbm (class2) module with antenna
* Bluetooth standard version 2.0 + edr compliant
* Low current consumption
* Hold, sniff, park, deep, and sleep mode
* 3.0v or 1.8 operation
* Supports for up to seven slaves: sco links (3), acl links and piconet (7)
* Interface: usb, uart and pcm (for voice codec)
* Hci or spp, hsp/hfp, hid and dun firmware is available
* For 802.11 co-existence
* Rohs compliant
* Small outline
Applications:
Pda, nb, and car kit
Presenter, mouse, and keyboard
Cordless headset, digital camera and printer
Access points
Gps, pos, and barcode reader
Data collector
Domestic and industrial applications.
Bluetooth standard v2.1+edr.
Integrated switched-mode regulator.
Integrated battery charger.
Embedded kalimba dsp co-processor.
Integrated 16-bit stereo audio codec
95db snr for dac.
Enhanced audibility and noise cancellation.
Integrated with 8m bits flash memory.
Support host interface: usb or uart.
Support digital audio bus : pcm, i2s or spdif.
Hsp/hfp/a2dp/avrcp profiles support.
Rohs compliant.
Small outline. 21 x 16 x 2 mm.
TS-M1020D is an 8*12mm ultra-small size Bluetooth low power ultra-low cost Bluetooth module, the module is a Bluetooth 5.2 chip, integrated BLE+SPP dual Bluetooth protocol, with excellent stability and compatibility. Module default Bluetooth serial port transparent transmission, the user can change the serial port baud rate, device name and other parameters according to the provided AT instructions, flexible operation and simple use. Suitable for various development projects of customers.
Model No.: TS-M1020D
Features
Bluetooth Version: BLE 4.2+SPP 3.0
Frequency Band: 2.402GHz-2.480GHz ISM band
TX Power: -20dBm~+4dBm
Receive Sensitivity: -95dBm
Air Rate: 250Kbps/1Mbps/2Mbps
Antenna: Ceramic Antenna
Advise Range: 80m
Memory: 256KB FLASH+128KB RAM
Size: 12*8*1.5mm
Pin/GPIO: 12/7
Power Supply: 3.1~4.35V
Operating Temperature: -20 ~+85
Peripheral Interface: UART/SPI/I2C/ADC
Serial Transparent Transmission Rate: BLE 4KB/s, SPP 16KB/s
Applications
Smart home
Location tracking
Intelligent educational equipment
Measurement and monitoring system
Industrial sensors and controls
Medical equipment monitoring and wireless control
* Bluetooth standard Ver. 2.0 + EDR compliant.
* Low current consumption :
* Hold,Sniff,Park,Deep sleep Mode
* 3.0V or 1.8V operation
* Support for up to seven slaves :
* SCO links<3>,ACL links,Piconet<7>
* Interface: USB,UART&PCM(for voice CODEC)
* HCI or SPP,HSP/HFP,HID,DUN firmware is available
* Support for 802.11 Co-Exsitence
* RoHS compliant
* Small outline. 14 x 12 x 2.2 mm
Applications:-
* PDA,NB, Car Kit
* Presenter, Mouse, Keyboard
* for Cordless headset
* Digital camera & printer
* Access Points
* GPS,POS, Barcode Reader
* Data collector
* Domestic and industrial applications.
TS-1106L is a low-cost portable Bluetooth tag, using a low-power chip design, with ultra-low power consumption, and a small size of remarkable characteristics.
It supports the standard iBeacon protocol, also supports the ordinary broadcast protocol, and can be an open data protocol, with the Bluetooth gateway, can be widely used in item tracking, asset management, and other industries.
Model No.: TS-1106L
Bluetooth Version: Bluetooth 5.1
Chipset: Dialog DA145 Series
TX Power: -19.5~+2.5 dBm, Default +2.5dBm
OTA: YES
Distance: 60m
Battery: CR 2032 (Replaceable)
Battery Life: 2 Years
Certification: BQB, FCC, CE, SRRC, RoHS, REACHColorWhite, Black
Weight: 6.3gSize33.8*23.6*5.4mm
OEM: Custom color, Print Logo, OEM Package, Software
The TS-2102B is a versatile Bluetooth beacon equipped with Bluetooth 5.2 technology and a Nordic nRF52 Series chipset. It operates effectively in temperatures ranging from -20�°C to +60�°C and is housed in a sturdy ABS case with an IP67 rating for dust and water resistance. This beacon features a 240mAh CR2032 battery, offering a battery life of up to 1 year under standard conditions. It supports optional sensors like a G-Sensor and temperature and humidity sensor, and is configurable with a TX power range of -20dBm to +4dBm and an advertising interval of 1 second. The TS-2102B boasts a broadcast range of up to 50 meters, making it a reliable choice for various applications requiring wireless connectivity and data transmission.
Model No.: TS-2102B
Bluetooth Version: Bluetooth 5.2
Chipset: Nordic nRF52 Series
TX Power: -20~+4 dBm (Configurable)
Distance: 50m
Battery: CR2032 (Replaceable)
Battery Life: 1 Year (0dBm, 1s)
Color: White
Size: �¦33*9mm
G-sensor: Optional
Temperature Sensor: Optional
OEM: Custom color, Print Logo, OEM Package, Software
TS-1106L is a low-cost portable Bluetooth tag, using a low-power chip design, with ultra-low power consumption, and a small size of remarkable characteristics.
It supports the standard iBeacon protocol, also supports the ordinary broadcast protocol, and can be an open data protocol, with the Bluetooth gateway, can be widely used in item tracking, asset management, and other industries.
Model No.: TS-1106L
Bluetooth Version: Bluetooth 5.1
Chipset: Dialog DA145 Series
TX Power: -19.5~+2.5 dBm, Default +2.5dBm
OTA: YES
Distance: 60m
Battery: CR 2032 (Replaceable)
Battery Life: 2 Years
Certification: BQB, FCC, CE, SRRC, RoHS, REACHColorWhite, Black
Weight: 6.3gSize33.8*23.6*5.4mm
OEM: Custom color, Print Logo, OEM Package, Software
