Switching power supplies ( smps ), rainproof , water proof & non water proof, dc/dc converters, battery chargers and transformers
Dear sir / madam,
We would like to introduce ourselves as manufacturers of industrial /
Professional grade switching power supplies.
Organizations manufacturing industrial electronic instruments,
Telecoms and process control equipments require compact, efficient,
And rugged switching power supplies and led drivers, dc/dc converters
At a most competitive price. We as an indian manufacturer have given
Utmost attention to the cost without compromising with the quality.
Our power supplies are being used by all over the country by all big
Oems. Feature wise our power supplies are equally comparable to any
Imported power supplies available in the country. These units have all
In- built protections along with very high mtbf.
We also manufacture customized power supplies as per specifications
Provided by our valued customers.
Mfrs. of Led Driver, Led Controller, SMPS Power Supplies for CCTV Camera / Security Systems, SwitchingPower Supplies, Battery Charger, DC/DC Converter, Transformer, Medical Power Supply, Switching Adaptors, Solar Products, Lithium Ion Charger, , Car Inverter, UPS & Inverter, Cvt.
Best regards,
Dimmable constant current led driver for leds application
High efficiency, up to 85%
Protection: short-circuit with hiccup mode, overload
Natural air convection
Class ii, no fg
Plastic case, ip20 for indoor use only
Optional multi-dim function, suitable for led lighting application
High current accuracy to make led lifetime longer
Functions:
100 to 240v ac switch dim:
On/off: short push (50 to 500ms ) on switch
Stepless dimming: long push and hold (>500ms) on switch
For tuning of light level: with every 2nd long push, light level goes opposite direction
Built in with permanent memory
Synchronization: no limitation on number of drivers when connected to same switch
1 to 10v dc dim: 1 to 10v dc dimmer and ext pot dimmer
Multi-current set: 300, 450, 500, 650 and 700ma select, set dip switch
Memory function: power offer memory function to memorize the light intensity, soft light on to memorized intensity, nice to eyes
Dim range and effect: 0.3 to 100% stepless dim to make light intensity vary smoothly, no flickering
Warranty: 2 years
Switching Power Supply (SMPS) S-350 Series (Single)
Low price and high reliability
105f¬ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With short-circuit and overload protection
100% full-load burning test
Installed with EMI filter, minimum wave.
1) Switching Power Supply (SMPS) Output:
Dc voltage/Rated current:5V/50A or7.5V/40A or12V/29A or13.5V/25.8A or15V/23.2A or24V/14.6A or27V/13A or48V/7.3A
2) Switching Power Supply (SMPS) Input:
Voltage range: 90 ~ 132VAC / 176 ~ 264VAC by switch 254 ~ 370VDC
AC input frequency: 47 - 63Hz
AC current:6.5A/115VAC 4A/230VAC
Inrush current (max.):cold start 25A/115VAC 50A/230VAC
Leakage current: <3.5mA/240VAC
3) Switching Power Supply(SMPS) Protection:
Overload 105 ~ 135% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed.
4) Switching Power Supply (SMPS) Environment:
Working temp.: -10 ~ +60f¬ (Refer to output load derating curve)
Wording humidity: 20 ~ 90% RH non-condensing
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
5) Switching Power Supply (SMPS) Dimension: 215*115*50mm (L*W*H)
6) Remark: Switching Power Supply (SMPS) special specifications can be made to order
Switching Mode Power Supply (SMPS) S-150 Series (Single)
Low price and high reliability
105f¦ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With short-circuit and overload protection
100% full-load burning test
Installed with EMI filter, minimum wave.
1) Switching Power Supply (SMPS) Output:
Dc voltage/Rated current:5V/30A or7.5V/20A or9V/16.7A or12V/12.5A or13.5V/11.2A or15V/10A or24V/6.5A or27V/5.6A or48V/3.2A
2) Switching Power Supply (SMPS) Input:
Voltage range: 85 ~ 132VAC / 170 ~ 264VAC selected by switch 248 ~ 370VDC
AC input frequency: 47 - 63Hz
AC current:3.2A/115VAC 1.6A/230VAC
Inrush current (max.):cold start 35A/115VAC 60A/230VAC
Leakage current: <3.5mA/240VAC
3) Switching Power Supply(SMPS) Protection:
Overload 105 ~ 150% rated output power
Protection type : Shut down o/p voltage, re-power on to recover.
4) Switching Power Supply (SMPS) Environment:
Working temp.: -10 ~ +60f¦ (Refer to output load derating curve)
Wording humidity: 20 ~ 90% RH non-condensing
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
5) Switching Power Supply (SMPS) Dimension: 199*110*50mm (L*W*H)
6) Remark: Switching Power Supply (SMPS) special specifications can be made to order
Switching power supply
Switching mode power supply (smps) sp-500 series (single)
105 output capacitor
Ac input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the ac input impact effectively
With short-circuit and overload protection
100% full-load burning test
Installed with emi filter, minimum wave.
1) switching power supply (smps) output:
Dc voltage/rated current:12v/40a or13.5v/36a 15v/32a or24v/20a or27v/18a or48v/10a
2) switching power supply (smps) input:
Voltage range: 88 ~ 264vac 47 ~ 370vdc
Ac input frequency: 47 - 63hz
Ac current:7a/115vac 3.5a/230vac
Inrush current (max.):cold start 18a/115vac 36a/230vac
Leakage current: <3.5ma/240vac
3) switching power supply(smps) protection:
Overload 105 ~ 135% rated output power
Protection type: constant current limiting, recovers automatically after fault condition is removed
4.)switching power supply (smps) environment:
Working temp.: -10 ~ +60f¦ (refer to output load derating curve)
Wording humidity: 20 ~ 90% rh non-condensing
Vibration: 10 ~ 500hz, 2g 10min./1cycle, 60min. Each along x, y, z axes
5) switching power supply (smps) dimension: 170*120*93mm (l*w*h)
6) remark: switching power supply (smps) special specifications can be made to order
Switching Mode Power Supply (SMPS) S-100 Series (Single)
Low price and high reliability
105f¦ output capacitor
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With short-circuit and overload protection
100% full-load burning test
Installed with EMI filter, minimum wave.
1) Switching Power Supply (SMPS) Output:
Dc voltage/Rated current:5V/20A or7.5V/13.6A or10V/10A or12V/8.5A or15V/6.7A or 18V/5.6A or24V/4.5A or27V/3.7A or48V/2A
2) Switching Power Supply (SMPS) Input:
Voltage range: 85 ~ 132vac / 170 ~ 264vac selected by switch 255 ~ 370vdc
AC input frequency: 47 - 63Hz
AC current:2.4A/115VAC 1.2A/230VAC
Inrush current (max.):cold start 30A/115VAC 60A/230VAC
Leakage current: <1mA/240VAC
3) Switching Power Supply(SMPS) Protection:
Overload 105 ~ 150% rated output power
Protection type : Shut down o/p voltage, re-power on to recover.
4) Switching Power Supply (SMPS) Environment:
Working temp.: -10 ~ +60f¦ (Refer to output load derating curve)
Wording humidity: 20 ~ 90% RH non-condensing
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
5) Switching Power Supply (SMPS) Dimension: 199*98*38mm (L*W*H)
6) Remark: Switching Power Supply (SMPS) special specifications can be made to order
If you want to know more information about our items please visit our website.
