Supply Ability: 5 sets per Month
Keywords: Rock stone impact
crusher machine
Dimension(L*W*H):2479x 2970x 2050 mm
Capacity(t/h): Max 600 t/h
Warranty of core components: 1 year
Key Selling Points: Low Maintenance Cost
Motor Type: AC Motor
Input Max Feeding Size: 500 mm
Machinery Test Report: Provided
Condition: New
Usage: ore,quarry ,sand making
Place of Origin: China
Warranty: 1 Year
Model type: PF
Rotate speed: 590-1480r/Min
Dehong jaw crusher series are based on years experience and technology development. The continuous improvement and refinement has made them the preferred jaw crusher for professionals and our customers.
They can meet most crushing requirements in primary and secondary crushing, and the largest compression resistance of the material is 320mpa. This series are widely used in stone mining, metallurgical, construction, smelting, hydraulic and chemical industries, etc.
Introduction:
Cone crusher is suitable for crushing all kinds of ores and rocks above medium hardness. It has the features of reliable structure, high productivity, easy adjustment and economical operation etc. It is widely used in metallurgy, architecture, rock making, chemistry and silicate industry for crushing various mid-hard and hard ores and rocks. The spring system acts as an overload protection system that allows iron to pass through the crushing chamber without damaging the crusher. It uses consistent grease or water for sealing, which separates crushed particles and lubricating oil, and ensures reliable work. The types of crushing chamber depend upon the usage of the final products. The standard type is applied to medium crushing; the medium type is fit for medium and fine crushing and the short head type is fit for fine crushing.
Main Features:We supply a wide range of Cone Crushers, for various secondary and tertiary crushing applications, therefore to insure the best and most feasible Cone Crusher type, fit for different plant configurations, designed for the most efficient and economical production and rock down sizing application. Our Cone Crushers are supplied in four general categories, designed for various types of secondary or tertiary applications, both for closed circuit and open circuit configuration: 1.Coarse type application. 2. Fine or medium type crushing. 3. Short head design.4. Super short head for fine crushing application. 5. Continuous Lubrication:
This type of crushers are supplied with high capacity external mounted lubrication unit, composed of oil-tank, oil filtering system, high oil temperature shut-down, low oil flow shut-downs and oil flow gauge, which is designed to supply continuous and stable oil, by forced lubrication to the Cone Crusher, for smooth rotation and operation.
Cone Crushers are configured with many safety features. The lubricating unit is interlocked with the main motor, in order to provide additional safety, which includes oil filtration and automatic shut-down in the event of high oil temperature, as well as low oil flow. Crushers are configured with Spring-Loaded release system, which allows any inscrutable material to pass through the crusher, without causing damage to the crusher. The locking system (manual or hydraulic), will easily secure the crushing clearance. All models are configured with proven spring-type mechanism, in order to recover Tramp-Iron and provide protection to the unit.
Applications :Cone crusher is a kind of crushing machine commonly used in mining, metallurgical industry, construction, road construction and chemical industry. Our cone crusher can be used to crush hard and medium hard minerals, rocks, iron ores, limestone, copper ores, quartz, granite, sandstones, etc.
The jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with comprehensive strength less than 320 MPa.
Cone crusher is specially designed to be used for medium crushing, fine curshing and ultra-fine crushing in mining, construction sand and gravel processing. We have three types of cone crushers: CS series cone crusher, HST hydraulic cone crusher, HPT hydraulic cone crusher. Our cone crushers have the advantages of high crushing efficiency, low production cost, convenient maintenance and adjustment, and excellent particle size of finished products. With full automatic control system, cone crusher can realize accurate regulation.
PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material.
Application:
Metallurgy, construction material, mine, beneficiation and large block material crushing.
Our advantages:
1. Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder.
2. The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well.
3. The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection.
4. Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing.
5. The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically.
The PF series impact crusher is mainly compose of the rack, driving system, rotor, hammer and impact plate etc. The main feature including:
1.Rack: It composed by two parts of upper and lower with connection by bolt. All the parts contact the crushed material in the rack have set replaceable lining plate.
2. Driving System: The main shaft and rotor are driving by motor through belt then doing the high speed rotary motion.
3. Rotor: It adopts entire cast steel structure with high mass force, solid and durable, convenient to install the hammer.
4. Impact Plate: It is made from new type abrasion material and hanging freely inside the equipment. One end connect with the two sides of the rack through hanging shaft hinge, another end is bearing in the upper rack cone gasket through stay bolt which is adopt a sphere gasket, it can prevent the equipment damage by non-crushing material when crushing material.
5. Hammer: It is made from new type abrasion material and fixed on the rotor through wedge block
Low Consumption Mining Crusher Machine , Rock Jaw Crusher is crushing equipment which mainly be applied in metallurgy, mine, chemical industrial, cement, building, fireproofing materials and ceramics and other industries to process middle hardness mineral. It is mainly used in various soft and hard mineral whose compression strength is no more than 300MPa, and the size of the biggest lumpiness should not be bigger than that of technical specifications.
Product Name:polyurethane screens
Material:polyurethane
Panel Size(WXL):1200x2400mm ; 355x3000mm; 534x3460mm ; 305x305mm; 305x604mm etc.
Thickness:25mm-60mm
Opening Size: 0.15mm-130mm
Usage:Industrial use like mining , sanding , quarry , coal washing etc.
Our Polyurethane Screen Advantages
1 high tensile strength imported polyuerthane material
2 High wear resistance has decided its long life time
3 Nice surface treatment as pic shown
4 Anti-pegging and anti-blinding due to its self relieving apertures
5 Easy installation and replacement
6 Suitable for all kinds of industrial medias, like wet or dry
Packing & Delivery Details
1 Packing :10 pcs into a wooden case (shown as below ) or customized
2 Delivery time: 7days for regular screens less than 50 pcs; 15 days for OEM screens less than 50pcs; 20-30days for screens over 50 pcs
3 Delivery methods: by sea , by air , by express like Fedex, DHL, TNT, UPS etc
About Us
>Established in 1985
>A well-equipped factory in Hebei, professional sales teams in Beijing
>About 50 staffs and 5 workshops , 30 casting machines in factory
> 1 year warranty , within this period from the date of your receipt , in case of any defect , we will make up for the corresponding qtys immediately or in next new shipment after you send us the evidence of defective product images or videos.
Any other questions , kindly contact me for further details any time !!!
Jaw crusher application:
Jaw crusher is widely used in mining , smelling, building material, highway, railway, water conservancy , chemical industry and many other departments, for this machine, the suitable crushed material are pyrite, limestone, basalt, phosphate, heavy crystal stone, calcium carbide, coke, etc.
Jaw crusher features:
This jaw crusher is composed of machine frame, eccentric shaft, large belt pulley, flywheel, movable jaw , side guard, toggle plate goggle plate backseat, adjust gap screw, return spring, fixed jaw plate and movable plate, among them, the toggle plate still play a role as insurance. This series have: high crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, low operating cost.
1.Crushing chamber is deep and no dead zone, improving feeding ability and capacity
2.Crushing ratio is high, finished product is regular
3.Pack discharge mouth adjustment device is reliable and convenient, and its adjustment range is large , increasing the equipment flexibility.
4.Lubrication system is safe and reliable, easy to replace the spare parts, simple maintenance
5.Simple structure, reliable operation, low operating cost.
6.The equipment is saving energy: single machine can save energy by 15-30%, and the system can save above one time.
7.The discharge mouth adjustment range is large, which can meet different customers need.
8.Low noise, small dust.
Jaw crusher operating principle:
The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw is down, the angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
