It is waterproofing ,vapour-permeable rofing membrane,and heat insulation material,which is widely used in construction,house warp,roofing,wall and flooring underlayment,breathable roofing membraneAt present,we have following productws :
PP Nonwoven +low breathable PE film+PP Nonwoven
PP Nonwoven +high breathable PE film+PP Nonwoven
PP Nonwoven +high breathable PE film+PP Nonwoven(PVC point bonded on upper surface)
It has following advantages:
1/,Excellent performace breather membrane
2/,Consturcted from high tensile spun-bonded polyproplylene layers
3/,Highest leves of water resistance
4/,Full moisture vapour permeablity
5/,Breathable underlay for tiled and slated pitched roofs
6/,Eco-friendly and completely recycled
7/,UV-resistant.
Use:
Breathable roofing underlay positioned immediately above the insulation layer in a warm pitched roof, or in a cold pitched roof (ventilated or unventilated). Breathable roofing underlay for use under tiles and sheeted roofs, over open rafters or on to fully boarded substrates. Breather membrane for timber frame
wall construction.
Features:
High performace breather membrane
Constructed from high tensile spun-bonded polypropylene layers
Higher levels of water resistance
Full moisture vapour permeability
Breathable underlay for tiled and slated pitched roofs
Eco-friendly to be completely recyclable.
TPO waterproof coiled material, namely thermoplastic polyolefin waterproof coiled material, is a new type of waterproof coiled material made of thermoplastic polyolefin (TPO) synthetic resin combining ethylene propylene rubber and polypropylene with advanced polymerization technology and adding antioxidant, antioxidant and softener. It can be made into reinforced waterproof coiled material with polyester fiber mesh cloth as internal reinforcement material, It is a waterproof product of synthetic polymer waterproof coiled material.
Thermoplastic Polyolefin (TPO) is a kind of polymer waterproof membrane. It can be reinforced with polyester felt and fiberglass with non-woven fabric backing, manufactured by advanced extrusion machining technology.
1)Itâ??s easy to install with good system integrity, few accessories. 2) Excellent tensile strength, tearing resistance and penetration resistance performance. 3) No plasticizer, They have been tested as having excellent resistance to thermal aging and ultraviolet, durable and exposed. 4) Hot welding. The peel strength of joint is high. 5) Fast welding speed. 6) Environment friendly, 100% recycled, without chlorine. 7) White-based light -color and smooth surface with high refection, energy saving and anti-dust function.
Introduction of 50000 Gallon Glass Fused To Steel Biogas Storage Tanks With Double Membrane Roof
The glass fused to steel tanks is the technical and economical core element of many biogas plants all over the world. Our glass fused to steel tanks are perfectly suited for biogas storage tanks operation.
Our glass-lined steel biogas storage tank is extremely resistant to corrosion and abrasion. As a perfect alternative to the red mud plastic tanks or stainless steel tanks, we always offer the best-suited material for the job - to choose glass fused to steel plate to make the tank. The Glass fused to steel plate have below features and advantages :
We always dedicated to offering the best quality glass-lined steel biogas storage tanks for our clients :
To assure the quality, a very strict quality control system has been executed with: 200 staffs in our quality control department and the QC control system is in accordance with the requirement of ISO9001. Moreover, 4 kinds of quality tests have been carried out from the beginning of production to delivery of the GFS tanks.
Glass fused to steel biogas storage tanks application
GFS tank has been widely used municipal and industrial effluent, sewage, wastewater, water treatment,biogas digester as various aerobic and anaerobic reactors of UASB, EGSB, SBR, BAF, USR, CSTR,and equalization tank, sludge holding tank, etc.
Introduction of 50000 Gallon Glass Fused To Steel Biogas Storage Tanks With Double Membrane Roof
The glass fused to steel tanks is the technical and economical core element of many biogas plants all over the world. Our glass fused to steel tanks are perfectly suited for biogas storage tanks operation.
Our glass-lined steel biogas storage tank is extremely resistant to corrosion and abrasion. As a perfect alternative to the red mud plastic tanks or stainless steel tanks, we always offer the best-suited material for the job - to choose glass fused to steel plate to make the tank. The Glass fused to steel plate have below features and advantages :
We always dedicated to offering the best quality glass-lined steel biogas storage tanks for our clients :
To assure the quality, a very strict quality control system has been executed with: 200 staffs in our quality control department and the QC control system is in accordance with the requirement of ISO9001. Moreover, 4 kinds of quality tests have been carried out from the beginning of production to delivery of the GFS tanks.
Glass fused to steel biogas storage tanks application
GFS tank has been widely used municipal and industrial effluent, sewage, wastewater, water treatment,biogas digester as various aerobic and anaerobic reactors of UASB, EGSB, SBR, BAF, USR, CSTR,and equalization tank, sludge holding tank, etc.
TJ-952 PVC waterproof membrane takes PVC resin as main ingredient,adding adequate modifiers,antioxidant agents,UV-light absorbents,color agents,filler agents and so forth,through polymerization and extrusion calendering,deformation,cool,inspection,racking,and packaging processing procedures into bendable waterproofing sheet membrane.It possesses high tensile and good elongation,high and low temperature resistance and it has good hot-melting properties. Cold-adhesive and hot-welding is both available when attending to the overlap of membrane,which forms into a solid,enclosed and integrated waterproofed layer.
PVC membrane is also called polyester fabric inner reinforcement PVC membrane,which is an plastomeric material. It takes polyester fabric textile as reinforcement felt,via special extrusion craft,making the PVC plastic layer on both sides with polyester reinforcement felt amid into an integration.Cutting-edge PVC plastic layer in combination with mesh polyester fabric gets rise to superior dimension stability and extremely low thermal expansion coefficients.
Characteristics
Prolonged shelf life,anti-ageing,used for house application can last over 20 years,underground can last over 50 years
High tensile strength/elongation,small heat-treatment dimensional variation
Great puncture resistance,good anti impact
Easy to install and weld solid;Environmental-friendly
Strong anti chemical,having special use
Specification:
Nominal Thickness:1.2/1.5/2.0mm Width:2.0m Length:15/20m or customized
Application Guide
In combination with the features of PVC membrane,it s usually applied in three methods,such as full-adhesive installation,border adhibiting method and mechanical fastener method. It requires exclusive PVC accessories set to help installation for complicated waterproofing spots.
1:Full-adhesive installation: Using exclusive PVC membrane adhesive set to apply on the substrate under normal condition is called full-adhesive installation
1)Requirement
The substrate needs to be smooth,no crack or bugle spots,clean,dry and the humidity is less than 9%,make the chamfer at internal corner and external corner with the diameter is more than 20mm
Installation process
Substrate treatment Measure,locate and draw lines weak spots strengthening paint the glue on large scale pave the membrane overlap treatment check
