Combination, plant, of, artificial, sand, building, garbage, collection, , metallurgical, , coal, , dressing, , building, materials, , chemical, , abrasive, material, industries, for, breaking, and, screening, process., used, for, putting, massive, granule, and, powder, material, from, storage, warehouse, or, funnel, into, receiving, equipment, homogeneously, , continuously, or, quantitatively, . Funnel size:2500x1200 mm Weight:2.2 t Dimension:2549x1761x1172 mm
By the Vibrating feeder, the material will be fed evenly and continuously into the room of the Storage Bin to grind. In the production line, the Vibrating Feeder can evenly feed the crushing material, and complete the primary screening. Vibrating Feeder features its own superiorities: stationary vibration, reliable operation, long time service life. The vibrating force can be adjusted, and the flux can be randomly changed and controlled, very convenient to control. The vibration force is the source of vibrating motor. It is of low noise, low energy consumption, good performance. Vibrating feeder is of simplicity in structure, reliability in operation, convenience in adjustment, light in weight, small in size, convenience in maintenance. The dust contamination can be prevented when the closed structure is adopted. Model:GZD-180*80,GZD-200*120,GZD-300*90,ZSW-380*96,ZSW-420*110,ZSW-490*110,ZSW-490*130,ZSW-600*150. Capacity (t/h): 30-80,80-500,40-100,90-200,150-350,180-380,250-450,450-800,600-1000. Max.Feed Size(mm):300,300,300,500,580,580,750,800.
Working principle: There are two eccentric shafts rotating at high speed at the same time from opposite directions. Thus the strong centrifugal force is formed. The component forces of centrifugal force along with the vibrating direction will always overlap each other, then counteract with that of vertical force from vibrating direction, then exciting force along single direction is formed to drive the feeder vibrate along straight line. When materials are fed into the feeder, they may be thrown up and move like curve, then fall down. The materials will move forward on the slope surface of the feeder.
Vibrating feeder Max.Feed size:300 Capacity(t/h):30-80 Power consumption(kw):2x1.5 Install obliquity:0-10 Weight (kg):0.8 Spec.Of groove (mm):80x1800 Overall size(lxwxh mm):2200x1100x80
Vibrating Feeder Features and values Reliable and precise feed rate adjustment by speed and stroke. Minimal maintenance and high performance Minimum operating cost Simple packaged feeding solutions Vibrating Feeder Operating principle:Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through driving the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward. When the materials pass the screening part, smaller parts will fall down avoiding the further crushing, so screening purpose can be reached.
Ytd-z150 vibrating feeder Vibration feeder, vibrating feeder, vibratory feeder, vibratory, feeder, feeding machine, feeder machine, feeding system, automatic feeding, feeding equipment, feeding line, charging machine, auto feeder, automatic feeder, automatic feeding machine, vibrating feeding machine Used for conveying bulk materials continuously out from hopper, and often used to supply material for z conveyor Adopts the electromagnetic vibration principle Convey material to conveyor's hopper evenly Feeding automatically Long durability Low noise Maintenance free Custom-made size Machine type ytd-z150 Hopper capacity 150 l Conveying capacity 3-7m3/h Voltage&frequency single-phase ac 220v; 50hz Power 0.3kw N.W. 150kg Packing size 1350mm(l)*900mm(w)*720mm(h).
Vibrating feeder is widely used in mining, metallurgy, coal, building materials, light industry, chemical industry, electric power, food, glass, refractory material and other industries. It is used for automatic matching, quantitative package and automatic regulating process. It can feed lump, granular and powdered materials from the storage silo or hopper to devices uniformly or quantitatively.
Introduction Gzd vibrating feeder consists of vibration frame, vibrating motor, spring, support base and wearable linear. It conveys the bulk or granular material from the hopper to the receiving device evenly, timely and continuously. It can feed the material for the belt conveyor, bucket elevator, crushing machine and screening machine. It is widely used in metallurgy, mining, coal, building, chemical industry, mechanical, light industry, food, etc. Functional principle Gzd vibrating feeder uses double vibrating motor drives the exciter to make the feeding hopper do reciprocating linear motion along slant direction. When the acceleration vertical component of vibrating feeder hopper is more than acceleration of gravity, the material in the hopper is tossed and jump as the parabolic path. The tossing and falling of the material is finished instantly to achieve the feeding. Advantages Feeding hopper is not easy to wear High precision feeding Easy installation and maintenance
Gz series electromagnetic vibrating feeder Vibrating feeder is widely used in crushing, screening production line of mining, cement, metallurgy, building materials, chemical, mineral processing, coal mining and industries. The vibrating feeder is used to mine material from a storage silo or other material storage equipment in uniform or quantitative supply to the equipment of subject material, and is the necessary equipment to practice routine automation. Introduction of the vibrating feeder: Gz series electromagnetic vibrating feeder mainly used for mining, metallurgical, chemical, coal, machinery and other industries in to the accepting machine. Being diversification, this series of products can be specially designed and produced according to the customers' need. Furthermore, all types of electromagnetic vibration feeder can be easily implemented manual or automatic control. Henan zhengzhou mining machinery co., ltd. Is a large professional manufacturer of vibrating feeder. We can provide our customer with a good consultant and assistant, to ensure our customer's investment will be rewarded with great profit. At the same time, select the right model of equipment for customer. To meet our customer's special needs, we can design and develop customized products.
Application of quarrying lime vibrating feeder device Â It can provide ores and rocks within 500mm for the next working procedure. ItÂ can send shaped and granule materials into receiving equipment evenly, timely and continuously. It is widely used as crushing and screening in the industry of metallurgy, building material, chemical industry, coal mining and abrasive material.Â Features of quarrying lime vibrating feeder device â?£.Steady vibrating, reliable working and long life. â?£.Adjustable vibrating. The rate of flow can be changed and controlled at any time, which makes the adjusting convenient and steady. â?£.Little noise and low energy consumption of quarrying lime vibrating feeder device . â?£.Simple structure, light weight and small size. â?£.Easy to maintain. â?£.Able to protect the feeder machine from pollution of dust when using the enclosed structure.
Vibrating Feeder is a kind of linear-direction feeding equipment, in the mineral ore &rocks processing plants, it can send materials to crusher evenly and continuously. At the same time, it can screen materials roughly, increasing the practical handling capacity of the whole production line. FEATURES: Stable performance &Reliable operation. Easy to adjust &Easy to maintain Long span life &No pollution with closed body Good performance-conditioning, it can be used in any severe environments APPLICATION: GME heavy-duty feeders have good performance in the mining, construction, road building, bridge construction, and quarrying, recycling, aggregates and cement industries. Almost all kinds of minerals &rocks and some other materials processing plants can use the vibrating feeder.
Vibrating feeder is also called vibration feeder.Vibrating feeder in the production process, can block, granular material from the storage silo in the uniform, timed, continuous to the receiving device to go. In the gravel production line for crushing machinery for continuous and uniform feeding, and coarse screening of materials, widely used in metallurgy, coal, mineral processing, building materials, chemicals, abrasives and other industries, crushing, screening and joint equipment. working principle of vibrating feeder vibrating feeder is composed of feeding tank body, exciter, spring bearing, transmission device and so on. The vibrating source of the tank vibrating feed is the exciter. The exciter is composed of two eccentric shafts (main and passive) and a gear pair. The motor drives the drive shaft through the V-belt, and then the driven shaft engages the driven shaft Rotation, the main and passive axis at the same time reverse rotation, the tank vibration, the continuous flow of materials to achieve the purpose of conveying materials. Uses of vibrating feeder Vibration feeder designed for crushing and screening coarse crusher in front of uniform delivery of large pieces of material design. Vibrating feeder with double eccentric shaft shaker structure to ensure that the equipment can withstand the impact of large pieces of material falling, feeding capacity. In the production process can be massive, granular material from the storage silo in the uniform, timed, continuous feeding device to receive, thereby preventing the receiving device due to uneven feeding and crash phenomenon, extending the equipment Service life. More details Pls CLICK:http://en.vibratingfeeder.sinocsm.com/
Vibratory bowl feeders are used to feed individual components parts for assembly on production lines. They are used when the small components must fed into another machine one by one or oriented in particular direction. This automotive machine save a lot of labor cost. It was applicable to various industries such as: hand tool industry, screws industry, metal and non-metal’s surface treatment and plastic/rubber products industry and so on.
We can also offer other brand feeder for sale, such as: Smt vibratory feeder(stick feeder) 1. Yamaha yv88, yv100, yv100ii, yv180, yv100x 2. Panasonic mpa40, mpa80, mpag1, mpag3, mpav2, mpav2b3. Kme cm92, cm95, cm202, cm201, cm301, cm302 4. Ip1, ip2, ip3, ip4, qp 5. Sumsung cp40, cp45, cp60 6. Juki ke710, ke720, ke730, ke750, ke760, ke2020, ke2060 7. Sony 1000, 2000 8. Tescon 301, 305, 307, 309
ZW Series Vibrating Feeder Type:Â Vibrating Feeder Input size:Â 400-1000mm Processed Materials:Â Concrete waste, iron ore, copper ore, gold ore, manganese ore, gravel, granite, river stone, basalt, limestone, dolomite, quartz, coal, etc. Applications:Â Mining, metallurgy, construction, highway, railway, and water conservancy, etc. Description We have two type feeders, one is vibratingÂ feeder, another is line feederï¼?Vibrating feeder withÂ two motors, the user adjust theÂ vibration frequency toÂ control the feeding speed, keep the whole production line working smoothly. Line feederâ??s characteristics: smoothly, working reliable, long-life working etc. Our feeders can feed continuity and evenly, rough sizing. It is widely used in crushing & screening production lineÂ for mining, construction, silicate, chemical industry. Vibrating feeders can feed continuity and evenly, rough sizing. It is widely used in crushing & screening production line for mining, construction, silicate,chemical industry. Specifications ModelManger size(mm)Max feeding(mm)Handle ability (t/h)Motor (kw)Weight (t)Size (mm) ZW0730700 * 3000â?¤ 40070 - 160152.82910 * 1320 * 1780 ZW0820800 * 2000â?¤ 20080 - 200112.31945 * 1430 * 1500 ZW0935900 * 3500â?¤ 50080 - 200153.53400 * 1540 * 1890 ZW0940900 * 4000â?¤ 50080 - 200153.83890 * 1540 * 2020 ZW10201000 * 2000â?¤ 250300 - 400112.51945 * 1640 * 1500 ZW12201200 * 2000â?¤ 250350 - 600152.81945 * 1840 * 1500 ZW14201400 * 2000â?¤ 250400 - 700223.5194582040 * 1500 ZW10451000 * 4500â?¤ 600360 - 48018.554370 * 1645 * 2130 ZW11501100 * 5000â?¤ 600360 - 5502264855 * 1780* 2360 ZW12501200 * 5000â?¤ 700400 - 600306.54855 * 1880 * 2360 ZW12601200 * 6000â?¤ 700400 - 6003775710 * 1880 * 2805 ZW15601500 * 6000â?¤ 900450 - 1100458.25710 * 2180 * 2805 ZW17601700 * 6000â?¤ 1000500 - 120045105710 * 2380 * 2805 Advantages & Characteristics Simple and reasonable structure Easy maintenance Continuous and uniform z
Model:GZT-0724-GZT-1560 Max Feed Size:450-1000(mm) Capacity :30-600(t/h) Application:mine, cement, lime, ore dressing industries GZT vibrating feeder use a pair of motor with complete same parameter as vibrating source. It can continuously and uniformly feed lump, granulate material to receiving equipment. and screen material during feeding process. It has feature such as big vibrating force, high strength, impact resistance, long service. Application It is widely used for feeding big size material for crushing in mine, cement, lime, ore dressing industries. OUR ADVANTAGE 1 Vibrating source is motor, small noise, strong vibrating force. Low energy consumption. 2 Stable vibrating force and easy adjustment, can change and control material feeding any time. 3 Gap between stick on outlet are adjustable. It can separate soil and sand during feeding process, the pre-screen capability can improve the coarse crushing capacity. 4 Material trough use frame type connect with rivet, and side plate is bend by a entire steel plate, compact structure, good rigidity, fatigue resistance. 5 Both backplate and stick are made by ware-resistant material, strong structure, high strength, impact resistance. 6 Big processing capacity, reliable running, easy maintenance. GZT vibrating feeding composed of material trough, vibrating exciter, spring supporting the structure features are 1 Material trough It is material conveying and feeding part, and integrated framework, riveted by lock rivet. The lining of trough: feeding section is blind plate (incline angle is 0ï½?5Â°) and outlet section is sticks (incline angle is 15ï½?20Â°). 2 Vibrating exciter Vibrating exciter is key part of vibrating feeder, use new type vibration motor as exciter, stable performance reliable, easy adjustment. 3 Spring support It is seated mounted, use steel spring as damper spring, operation reliable and long service long.
Model:ZSW-380X95,ZSW-600X130 Max Feed Size(mm):500-750 Capacityï¼?t/hï¼?:96-560 Application:Stone Crushing,Ore Dressing ZSW Series Vibrating Feeder is mainly used to feed material into primary crusher evenly and continuously. Meanwhile, it can screen material and strengthen the capacity of the crusher. Feature and Advantageï¼? (1)Smooth vibration (2)Special bar to prevent the block of row material (3)The distance between bars is adjustable (4)Stepless speed-regulated motor which could be additionally mounted so as to control the feeding capacity without frequent star-up of motor.