Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
Materials:SUS410,SUS420J2
We have a wide range of products and models for your selection. All products are produced under strict quality control, and development ensures that you are getting the latest products with the most advanced and cost effective technologies.
Valve Seat Puller & Claw, which is a hydraulic device. The connecting screw thread between leading screw and claw is API Standard and it can be exchangeable. Claw is manufactured by ASTM1066 and has 3 armed, 4 armed and full open type, which is suitable for the size of API-5#,API-6#,API-7#,API-8# valve seat.
Hydraulic valve seat puller is a removal service tool in a mud pump.
The hydraulic valve seat puller is used to take installed mud pump valve seat out of mud pump fluid end module, during the process of replacing the valves seat or mud pump maintenance. At the same time, eliminate damage to fluid end
expendables caused by removing valve seat with a cutting torch.
Material:
Full-threaded rod, claw head is 35CrMo forged.
Hydraulic Valve Seat Puller
Mud pump valve seat puller consists of oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc.
This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time.
Advantage:
simple structure, easy to use, can save a lot of manpower and time, and cost-effective.
Valve Seat Puller & Claw, which is a hydraulic device. The connecting screw thread between leading screw and claw is API Standard and it can be exchangeable. Claw is manufactured by ASTM1066 and has 3 armed, 4 armed and full open type, which is suitable for the size of API-5#,API-6#,API-7#,API-8# valve seat.
Hydraulic valve seat puller is a removal service tool in a mud pump.
The hydraulic valve seat puller is used to take installed mud pump valve seat out of mud pump fluid end module, during the process of replacing the valves seat or mud pump maintenance. At the same time, eliminate damage to fluid end
expendables caused by removing valve seat with a cutting torch.
Material:
Full-threaded rod, claw head is 35CrMo forged.
Hydraulic Valve Seat Puller
Mud pump valve seat puller consists of oil cylinder, hydraulic hand pump with pressure gauge, all thread rod, puller claw etc.
This tool is more effective to finish the maintenance and mud pump repair work with fewer manpower and shorter time.
Advantage:
simple structure, easy to use, can save a lot of manpower and time, and cost-effective.
Specification: 30 x 4 x 11.8 mm
. Density of valve seat: more than 6.5 g/cm3
. Hardness: 60-70 hb
. Efficient steam treatment
. Low friction.
900pcs per carton
. Carton size: 27.5 x 22.5 x 18.5
. Gross weight: 24.5 kg
. Net weight: 24 kg
. Packing dozens of cartons per pallet
. 7-9 pallets per container.
Valve Type Soft Seated Butterfly Valves
Valve Model VBS Wafer VBS Flanged VBS Wafer FAB
Valve Sizes 80-700 mm 600-1800 mm 500-1200 mm
End connection Wafer Flanged Wafer
Construction Cast Cast Fabricated
Design Standards AWWA C 504 Cl. 150 AWWA C 504 Cl. 75,150
Flange Standard ANSI 150,
AWWA C 207 Cl.D (Std)
JIS 10K, DIN 10K
BS 10K (Options) AWWA C 207 Cl. D (Std)
BS PN 10,
IS 6392 PN 10 (Option) AWWA C 207 Cl.B (Std) Available with any flange standard on demand.
Max. working Pressure 5.25 Kg/cm2 (75 PSI Rating)
10.5 Kg/cm2 (150 PSI Rating) 5.25Kg/cm2 (75 PSI Rating)
10.5 Kg/cm2 (150 PSI Rating) 1 Kg/cm2
Working temp. range -20 to 2000C -20 to 2000C -20 to 2000C
Hydro test pressure 10.5,21 Kg/cm2 (75,150 PSI) 10.5, 21 Kg/cm2 (75,150 PSI) 2 Kg/cm2
Seat leakage test pressure 5.25, 10.5 Kg/cm2 (75,150 PSI) 5.25, 10.5 Kg/cm2 (75,150 PSI) 1 Kg/cm2
Inherent Rangeability 20:1 20: 1 20: I
Refer Table 2
Control mode On-Off service (900), Regulating (600)
Flow Characteristics Inherent Butterfly valve Characteristics, Refer section V
Max. Differential Pressure Refer section VI for selection of actuators
Leakage Class Tight shuff off
Standard materials Body Carbon Steel (A216 WCB) Carbon Steel (A 216 WCB)
Cast iron (IS 210 Gr FG 260) Carbon Steel
(IS 2062 / IS 2002 . Gr.2A)
Vane Stainless steel (A 351 CF8, CF8M for 80-300 mm)
Carbon steel (A 216 WCB 300 - 700 mm) Carbon steel (A 216 WCB)
Cast iron (IS 210 Gr . FG 260) Carbon steel
(IS 2062 / IS 2002 . Gr.2A)
Shaft SS, A 479 Type 304, 316 SS, A479 Type 410 SS, A 479 Type 304, 316
Seat i" NBA, EPDM NBA Viton, NBR
Seat Ring,
Retaining Ring SS 304, 316 SS 304, 316 SS 304, 316
Bush Leaded tin bronze Leaded tin bronze Leaded tin bronze
Packing V-7132Y (Tef. Imp. Asbestos) v-7132Y V-7132Y
Options Body Stainless Steel
(A 351 CF8, CF8M)
Cast Iron
(IS 210 Gr FG 260+2% Ni) Cast Iron
(IS 210 Gr FG 260 + 2% Ni)
Stainless Steel
(A 351 CF8, CF8M) Stainless Steel
(A240 Type 304, 316)
Vane Stainless Steel (A 351 CF8, CF8M for 300-700mm) Cast Iron
(IS 210 Gr FG 260 + Ni)
Stainless steel (on demand)
(A 351CF8, CF8M) Stainless Steel
(A 240 Type 304, 316)
Shaft SS, A 479 Type 410 SS, A 479 Type 304, 316 SS, A 479 Type 410
Seat Viton, Neoprene, Silicone, Butyl Rubber, Teflon " EPDM, Viton EPDM, Neoprene, Silicone, Butyl Rubber
Bush Teflon, Stainless steel (Stellited) Teflon Teflon
Packing 'O' rings 'O' rings 'O' rings
maximum working temperature 220c
take off pressure 0.5-16bar
body: cw617
sealing material: metal seal or teflon seal
applications: mold temperature machine, air condition. heat pump,heating. coal to electricity. boilers,machinery.
The Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also.) The superior design of the piston is unique to the market, enabling the plug to retract farther from the flow path, ensuring the highest flow capacity. The dual packing design, and a large diameter self aligning stem insures the highest cycle life. A full range of accessory items are available including limit switches, solenoid valves, manual override devices, stroke limiters.
Features & Benefits:
Integrated pneumatic actuator
NAMUR solenoid mounting pad
Compact assembly
Visual indicator
High Cycle-Life
Actuator rotates 360
Complete line of accessories.
Materials:
Body, Plug, & Stem:
Zeus - Bronze
Ares - 316SS
Seats & Seals: PTFE
alve Configurations
Spring Ret. N.C. Bi-directional Flow
Spring Ret. N.C. Flow from Above Plug
Spring Ret. N.O. Flow from Below Plug
Double Acting Bi-directional Flow
Manual Handle Bi-directional Flow
End Connections
NPT Threaded (3/8" to 2")
Tri-Clamp (1/2" to 2")
Butt Weld (call)
150 lb. ANSI Flanged (call)
Specifications:
(Viton Seals)
Temperature Range: -14 to 358F
Max. Pressure: 150 PSIG
Typical Applications
Steam Applications
Air Drying Equipment
Sterilizers
Autoclaves
Process Control Applications
Laundry Equipment
Textile Dyeing & Drying
Bottling & Dispensing Equipment
Ink & Paint Dispensing
Industrial Compressors.
Feature:
External pneumatic guide may prolong the service life and is free of maintenance.
The self-adjusting gland between the overflow port and slide block may improve the
Sealing performance.
The angle seat structure of the valve may realize big flow (especially compared with
General stop valves) with compact structure and quick response.
Medium temperature: -10~+180
Angle-seat valve
Item no.: qjz-15, 20, 25, 32, 40, 50.
Specification:
1. Dn 15-50.
2. Show the f½on/offf+ position of valve intuitively.
3. Outside pneumatically pilot operated, longevity of service life guaranteed, keep sealed for 5000, 000 times, non-maintaining.
4. Actuator can rotate 360 degrees.
5. Overflow and flow mouth and slip have self-regulating sealing bottom sub, which can raise the sealing capability.
6. Compact angle-seat valve body, high flow rate achieved and responded fast.
7. Body material: stainless steel (304, 316, 316l available)
8. Actuator casing material: pa6.
9. Seal material: ptfe.
10. Packing gland: ptfe v-ring with silicone grease with spring compensation.
11. Air source: neutral gas, air.
12. Media: high-temperature steam, neutral gas.
API 7# Full Open Valve Seat for Mud Pump
Product Description
1.Stem-guided Valves& Cross-arms Seats
Stem-guided valve and cross-arms seat features an extra wide metal to metal seal on the valve flange. The serrated upper surface on the valve gives a longer non breathing seal between valve body and insert while the rigid seat cross-arms give greater strength and positibe sealing.
2.Three-wing valves and full open seats.
Three-wing guided valves and full open seats features greater fluid flow than four wing valves, the unibody forged valve features greater strength than traditional welded wing valve. Innovative unibody valve design eliminates snap rings, plates or keepers providing reduced maintenance by snap-on valve inserts and easy installation.
3.Double angle O-ring valve
The Double angle O-ring valve is made with a tough one-piece body to run more hours between change outs. Its made with carburized premium alloy steel to resist wear, provide a positive seal, and help protect against wash out or damage to the pump.
Brand
Model
Emsco
F-350
F-500
F-650
F-800
F-1000
FA-1300
FB-1300
FA-1600
FB-1600
Gardener Denver
PZ-7
PZ-8
PZ-9
PZ-10
PZ-11
National
7-P-50
8-P-80
9-P-100
10-P-130
12-P-160
IDECO
T-800
T-1000
T-1300
T-1600
Oil Well
A-350
A-560
A-650
A-850
A-1100
A-1400
A-1700
China
3NB-350
3NB-500
3NB-800
3NB-1000
3NB-1300
3NB-1600
3NB-2200
39109 Valve Seat Suppliers
Short on time? Let Valve Seat sellers contact you.
