The Canned Fruit & Vegetable Processing market research report provides key industry analysis and industry statistics, measures market size, analyzes current and future industry trends and shows market share for the industry’s largest companies. IBISWorld publishes the largest collection of industry reports to view the industry’s supply chain, economic drivers and key buyers and markets. Industry Analysis & Industry Trends Growth in the Canned Fruit and Vegetable Processing industry has been constrained over the five years to 2016, primarily because recent shifts in consumer preferences have reduced demand for many of the industry's core products. Due to consumer perceptions about the relative nutrition of these products and increased attention to healthy eating, more Americans have favored fresh and organic foods, dampening industry demand.
Tin : The Pitch Being Very Malleable Can Easily Be Laminated Into Thin Sheets (staniol) Obtaining : - From Casierite, By Reduction With Charcoal. Use : - Electro technical / Electronics Industry (soldering Alloys); - Coating Other Metals To Protect Them Against Corrosion. Property : - Being Very Malleable, Can Be Easily Laminated Into Thin Sheets (staniol). Material Specification : According To Sr En 610/2000. Brand : Sn 99.9. Presentation Form : Max. 30 Kg. Provenience : Import
Luminous characters with tin, tin content of 50%, suitable for a variety of luminous characters welding, a 0.7kg, tin must be with the welding word po, dilute hydrochloric acid or tin solder solution used, more efficient! Temp heat welding word when used to preheat, preheat to the vent hole after the smoke to welding, welding tip position and welding position must be sticky dilute hydrochloric acid or tin solder solution, so welding will be solid , high-power heating core is to ensure that the high temperature to ensure a solid welding, copper head must be copper, and only copper can hang tin can be welded, when the middle of the welding when the pause, you can adjust the iron iron regulator, so the temperature will not fall, it will not dry, to ensure that the life of soldering iron! Stainless steel word production process: Stainless steel words are all stainless steel, this metal is mainly installed in the interior, and more high-end, but the requirements for the relatively high technology, especially the welding of this one. Here i would like to talk about the production of stainless steel word steps: Step 1: panel production, usually flat, there are three-dimensional, three-dimensional, spherical and so irregular panels, spherical and other highlights is to use the plate slowly knock, the other pattern is engraving machine engraved of. Step two: the edge of the very simple, with a slotting machine first slot, and then facing the panel to slot, or hand-held slot machine to slot, where welding where the slot, it is convenient, but for stainless steel edge of the knife when the wear and tear is relatively fast, nor too flexible, there are certain limitations, narrow places may not be able to slot. Step three: that is, welding this one is to see the welding master used a welding tool, and some with a soldering iron, and some use of argon arc welding, the funds allowed to use laser welding, are very good choice. Step four: the floor is installed on it. -
Our price refer to lme + premium Brand: banka, kundur, mentok, imli, non-brand Spec tin ingots 99.99% -tinpb300 -tinpb200 -tinpb100 -tinpb050 -tin4nine Terms: cif or cfr Note: If you interesting with our product, pls leave your contact details on my message or your enquiry.
Tin ingots which we supply is lme registered tin ingots.Tin is used in the manufacturing of super conducting magnets. Tin ingots that are useful for application in electroplating, soldering and chemical formulation.While tin has many uses in alloys, it has few uses in its pure elemental form.
Description Place of Origin: China (Mainland) Brand Name: CK Model Number: T-0123 Weight: 25 KG Dimensions: 25Kgs/ingot Chemical Composition: Sn99.995% Alloy Or Not: Non-alloy Secondary Or Not: Non-secondary Sn (Min): 99.99% Name: Tin Ingot weight: 25kg per ingot tin ingot purity: 99.99%
EWC CODE: 15 01 04 ISRI Specification: 213 BASEL CODE: B10 10 Composition: Ferrous Cans coated by a thin layer of Tin Recovery Code :R4 Specifications: Steel cans in bundles The Tin Cans are a post consumer light melting scrap, made up of used tin cans, clippings and skeleton scrap, which are processed and hydraulically compressed in bundles. Tin Cans may be baled without the removal of paper labels, but free of other non metallic contaminations. Our products don’t contain neither dangerous materials nor inflammable, radioactive or explosive substances. Packing: The material is pressed and ready for melting (R4 recovery); Average Bale Size: 30cm x 30cm x 30cm; Average Bale weight: about 270Kg Storing: The stock collected is stored in open air on cemented flooring. Availabilities: A 100 MT trial order is suggested, to check the suitability of the material for the end-user recovery process. Following quantities up to about 2.000 MT/monthly can be arranged. Shipment Options: The baled material can be loaded loose and shipped in 20’ Upgrade Containers. Average container weight 25 to 28 MT, or to the maximum loading capacity, permitted by the destination country/shipping company. Bulk Vessel Origin: United Kingdom Inspection: After the contract signature and L/C opening, visual inspections of buyer representatives at our yards, are always welcome and recommended. If required, our plants are open to any accredited international inspection company in order to supervise our yard and test the quality of our products.
Tin Ingots 99.999% Tin ingots which we supply is LME Registered tin ingots.Tin is used in the manufacturing of super conducting magnets. Tin Ingots that are useful for application in electroplating, soldering and chemical formulation.While tin has many uses in alloys, it has few uses in itâ??s pure elemental form.
Tin, which is sn plating, tin known as tinplate, tin-plated sheet steel is commonly known, the english abbreviation for the spte, refers to both sides of the commercial pure tin-plated cold-rolled carbon steel sheet or strip.Tin to prevent corrosion and rust from the main role.It's strength and formability of steel with the corrosion resistance of tin, tin solder and attractive appearance combined with being in a material with a corrosion-resistant, non-toxic, high strength, good ductility properties. Material: mr/spcc/spte/q195 Thickness: 0.14-0.45mm Width: 200-1050mm Temper: t2, t2.5, t3, t3.5, t4, dr8, dr9 Coating: 2.8/2.8, 5.6/5.6, 2.8/5.6...11.2 maximun Surface: finish Bright, stone, silver, matt Annealing: ba & ca Oiling Dos Application: bottle cap, paint, chemical can and other usage can making
Tinplate JIS G3303 SPCC/MR type Coating: 2.8/2.8~5.6/5.6 Temper: T2-T6,DR8 Size: (0.13MM-0.40MM)*(600MM-1250MM)*C Specifications Electrolytic tin plate Thickness: 0.13 to 0.40mm Width: 600 to 1250mm Coating: 2.8/2.8; 5.6/5.6 Tempe: BA and CA
1. Technical standard: DIN, GB, JIS 2. Steel type: MR, SPCC,SPHC 3. Thickness: 0.15 - 0.50 mm 4. Roll width: 450mm- 970 mm Coil ID: 508 mm 5. Cut length: 600mm-1200 mm 6. Tin coating weight: 1.1-5.6 or according to your requirement. 7. Temper: T1-T5, DR8 annealing:BA 8. Surface: Bright/Stone/Silver/Matt finish with passivation treatment; DOS oil 9. Packaging detail: Thin plastic film, rust-proof paper, metal cover, metal corner, metal band, wooden skid.
Main purpose¡êo can be used as coating materials, foods, machinery, appliances, automotive, aerospace and other industrial sectors have a very wide range of uses. In the float glass production, the molten glass floats on the surface of molten tin pool cooling solidified. Traits ¡êosilver-white metal, soft, with good ductility. Melting point232 , density 7.29g/cm3. Non-toxic Product specifications ¡êoeach ingot weight 25kg ¡ê» 1 kg; bundles, each bundle weighing about 1050 kg.
Standard: iso11949 - 1995, gb/t2520-2000, jis g3303, astm a623, bs en10202 Material: mr, spcc, sphc, sphd, s08al, q195 Thickness: 0.15mm - 0.4mm Width: 60mm -980mm Temper: t1 - t5;dr8 - dr10 Annealing: ba & ca Coil diameter: 420mm, 450mm or 508mm Weight: 6-10tons/coil Oil: dos 311 Surface finish: bright, stone, matte, silver Tolerance: -/+ 0.01mm for thickness, -0/+ -0.23mm for width and length. Packing: 1. For sheets: thin plastic film + rust-proof paper + metallic cover + metallic angles+ steel band strips + wooden pallet. 2. For coils: thin plastic film + rust proof + plastic protect plate + steel band strips.
Thickness: 0.16mm-0.3mm (Tolerance: +/-0.01mm) Width: 600mm-1100mm Steel Material: SPCC, MR Annealing Type: BA (Batch Annealing) Temper: T2.5, T3, T4, T5, DR8. Standard: JIS G3303 Chrome coating: 2.8/2.8 2.8/5.6 5.6/5.6 Surface Finish: Bright , Matt Oiling: DOS ProductionCapacity: 3000 Tons/Month The Usages: Food can, Paint cans, Chemical cans Export Package: Anti-rust paper, steel cover, corner protected, steel strip and pallets
Tinplate coil(ETP).Standard: Jis G3303 1.Material: MR,SPCC 2.Temper: T1-T5,DR8,DR9 3.Surface:Bright, Stone, Silver and Matte 4. Thickness: 0.18-0.46mm 5. Width: 600-1050mm 6. Tin coating: 2.0/2.0, 2.2/2.2, 2.8/2.8, 5.6 g/m2 7. Anneal: BA & CA 8. Passivation: 300 or 311 9.Oiling;DOS 10. supply capacity: 60,000 each year 11. Origin: China. Minimum Order Quantity: 25 Ton/Tons Price: FOB USD 1100~1200 / Ton Port: Shanghai Packaging Details: 1. 3-5 coils each 20 feet container,max weight 25 MT ;2 . film+anti-rust paper +steel cover+corner protected+steel angels+pallet Delivery Time: 30-40 days Payment Terms: L/C,T/T,Western Union Supply Ability: 50,000 Ton/Tons per Year. Our advantage in your market is fast delivery, competitive price, excellent quality and best service, we do can help you develop greater market. Pls do not hesitate to contact us. Thickness:0.15-0.55mm Width:600-860mm Base plate:SPCC,MR.