Surge Protection Suppliers and Manufacturers

Brands : Siemens, Schnieder, Abb, Legrand, Chint, Havells, L&T, C&S, HPL etc Voltage : 275, 440, 255 Breaking Capacity : 10kA,12.5 kA, 25kA, 40kA, 80kA Modules : 1,2,3,4,5,6,7,8 If you have been looking for Schneider, ABB, L&T, Siemens, Chint, havells, HPL, Hager etc SPD dealers, your search ends here as you can get the best SPD distributors in countries such as USA, UK, Australia, Sweden, Africa, Middle east, Europe, Asia etc. You can purchase SPD of the finest quality and rest assured to get the best in terms of both durability and performance

Surge protective device, spd, distribution box, floor box, junction box, weather protected box

Class B / Type I Class C / Type II Class D / Type III Data Surge Protection PoE Surge Protection Signal Surge Protection

DK-20 power supply series modular surge protective device(SPD) is designed according to IEC61643 standard. It is accordance with the criterion of Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm DIN-Rail Mounting. With working indication window, temperature control circuit breaker and built-in over-current protective� circuit, the modular SPD can release automatically to avoid fire danger when it breaks down. With remote alarm connector, it is convenient for remote monitoring. The main module and the base are replaceable. The lightning protection modes is L-PE, N-PE (2P/4P) or L-N-PE (1+1) / (3+1).

Techwin DIN rail 40kA Class C surge protection deviceSPDTüV certificated for Three-phase 380V AC system APPLICATIONS: Class C Surge Protective Device for AC Power System. A. Power distribution box(cabinet) B. AC cabinet, cabinet air conditioner, C. PV inverter, Solar inverter, inverter charger, inverter cabinet D. Switching mode power supplySMPS Box, SMPS cabinet high-frequency switching mode power supply,UPS system E. Data center, IDC power system, Column head cabinet F. Charging station/charging point Sensitive electronic equipment pulse width modulation(PWM box) Automatic control panels, motor control panels IT,TT,TN-C,TN-S,TN-C-S and other power supply system.  FEATURES: DIN rail mounting for easy installation Plug connectors for quick and easy connection or rewiring 40kA maximum surge current Thermal disconnect device Status indicators visually verify protection level Surge protection device with N-PE residual current spark gap as 3+1 circuit Remote alarm function ISO 90012008 certificatedISO14000:2004 certificated and OHSAS180002007 certificated High quality products with TüV, CE, UL certificate TECHNICAL PARAMETER ModelM40B3+N Electrical parameter Nominal working voltage Un 50/60Hz 220/380V, 230/440V Max. continuous operating voltage Uc385V Nominal discharge current8/20µsIn20kA Max. discharge current 8/20µsImax40kA Protection level @20kA , 8/20µs Up1500V Let through voltage @3kA , 8/20µs800V Response time tA25ns Protection modeL1/L2/L3-N, N-PE General data Dimension90 (H)Ã?72 (W)Ã?65(L)mm Weight per unit500g Mounting35mm DIN rail Recommend cross-sectional areaL/N 10mm2 PE16mm2 IP codeIP20 Working conditionsTemperature: -40 to 80, Relative humidity: 95 Test standardsIEC61643-1, UL94-V0, ROHS

Basic Parameters a) Rated voltage (Un) 230v~, 120v~ b) Rated current (In) 10A, 13A, 15A, 16A, 20A. c) Rated frequency (FN) 50Hz/60Hz d) Life: circuit protection device: 10,000 times; normal operation: 8000 times. Protection Functions: 1, Leakage protection(GFCI function): When body touchs electricity, earthing is unusual, power will be cut soon within 25ms. There will never be danger of electric shock. 2, Surge protection: Power will be cut at once when surge or thunderstroke, in order to protect all working electric equipments. 3, Overcurrent protection: Protect all working electric equipments from surge and heavy current in circuit. 4, Short circuit protection: Power will be cut within 25ms when short circuit happens. 5, Overvoltage protection: Protect electric equipments when external voltage exceeds standard. 6, Undervoltage protection: Protect electric equipments when external voltage is under standard. Energy-Saving: 1, Alternation current reactive power compensation energy saving: Reactive power compensation built inside, in order to improve electro-power factor, adjust network voltage, reduce circuitry waste, improve quality of power supply. This can save 10%-30% electricity. It specially works well for electric machines such as fridge and washer. 2, Time-delay standby / Timing energy saving: This product includes time-delay energy saving component and timing energy saving component (optional). Time-delay component can stop power supply automatically to avoid electricity waste, while electric equipments are standby. Timing component can define any power off time within 24 hours, with easy operation. Product characteristic: A, Zero power dissipation permanent magnetism breaker module built-in, safe without delay. B, Produced with silver alloy contacts, safe and reliable with excellent electronic conductivity. C, Case is produced with PC fire-retardant material (94UL-V0). Inside material produced with heat resisting nylon. D, Copper components produced with extra heavy phosphor bronze, with high metal memory, can be pluged 8000 times. E, One-button smart test function, can test protection function of product to avoid malfunction. F, USB charger component (optional), supplies DC 5V power for all kinds of usb products. G, Neoteric cable fixture on side of socket, can fix cables of electric equipments and makes them orderly. blister packing, ctn size:45*45*40 cm ,25 pcs.

DK-40 power supply series modular surge protective device(SPD) is designed according to IEC61643 standard. It is accordance with the criterion of Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm din-rail mounting. With working indication window, temperature control circuit breaker and built-in over-current protective� circuit, this SPD can release automatically to avoid fire danger when it breaks down. With remote alarm connector, it is convenient for remote monitoring. The main module and the base are replaceable. The lightning protection modes is L-PE, N-PE (2P/4P) or L-N-PE (1+1P) / (3+1P).

APPLICATIONS: Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge. CAT5e and CAT5 compatible IEEE 802.3afï¼?803.1at 10/100 Base-T Ethernet protection LAN, FDDI, CDDI, ATM,WLAN PDH, SDH, SPDH Industrial control Industrial POE, With High reliability and high stability Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system.

FEATURES: DIN rail mounting for easy installation Plug connectors for quick and easy connection or rewiring 25kA Iimp capability Thermal disconnect device Status indicators visually verify protection level Surge protection device with N-PE residual current spark gap as 3+1 circuit Remote alarm function ISO 9001ï¼?2008 certificatedï¼?ISO14000:2004 certificated and OHSAS18000ï¼?2007 certificated High quality products with CE, Rohs certificates

Our featured products automatic transfer switch, circuit breaker, contactor, pilot light,relay, SPD, etc. with solid quality and considerable price and could equip them with enclosure. Surge Protection Device (SPD) It is a device used to limiting instant surge voltage and discharge surge current, it at least including a non-linear component. SPD for Power Supply System Series Selection Guide The installation of SPD at each lightning protection zone, according to the standard of low voltage electrical appearance, make classification of electrical equipment in accordance with the over voltage category, its insulation withstand impulse voltage level can determine the selection of SPD. According to the standard of low voltage electrical appearance, make classification of electrical equipment in accordance with the over voltage category as signal level, loading level, distribution and control level, power supply level. Its insulation withstand impulse voltage level are:1500V,2500V,4000V,6000V. As per to the protected equipment installation position different and the different lightning current of different lightning protection zone, to determine the installation position of SPD for power supply and the break-over capacity. The installation distance between each level SPD should not more than 10m, the distance between SPD and protected equipment should as short as possible, not more than 10m. If due to limitation of installation position, can't guarantee the installation distance, then need to install decoupling component between each level SPD, make the after class SPD can be protected by the prior class SPD. In the low voltage power supply system, connecting an inductor can achieve the decoupling purpose. SPD for power supply system specification selection principle Max. continuous operating voltage: bigger than protected equipment, the system's max. continuous operating voltage. TT System: Uc 1.55Uo (Uo is low voltage system to null line voltage) TN System: Uc 1.15Uo IT System: Uc 1.15Uo(Uo is low voltage system to line voltage) Voltage Protection Level: less than the insulation withstand impulse voltage of protected equipment Rated discharge current: determined as per to the lightning situation of the position installed and lightning protection zone. SP1 Series Normal Working Conditions -Altitude not exceed 2000m -Ambient air temperature: Normal range: -5 ºC~+40 ºC Extend range: -40 ºC~+80 ºC -Relative Humidity: 30% - 90% under indoor temperature condition - At the place without obviously shaking and shock vibration - Non-explosion danger medium, non-corrosion gas and dust ( including conductive dust) Classification -As per Nominal Discharge Current: 5,10,20,30,40,60KA(8/20 µs) - As per Maximu

Photovoltaic System with CE & TUV DC1000V-40ka Surge Protective Device (SPD)   1. Product Function Products are mainly used in the DC power supply lighting protection and over-voltage operation protection function.  2. Main features:  Use high quality varistor, reliable high-quality assurance and stable performance Modular design, can be charged plug, easy to test or replace With remote alarm device, easy for remote monitoring Adopt temperature control circuit technology, over-current and over-voltage double automatic protection circuit With working and fault display, degradation status is clear at a glance  Fast response time, large discharge current capacity, low residual voltage easy to install, maintain simple

APPLICATIONS: Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge. CAT5e and CAT5 compatible IEEE 802.3af803.1at 10/100 Base-T Ethernet protection LAN, FDDI, CDDI, ATM,WLAN PDH, SDH, SPDH Industrial control Industrial POE, With High reliability and high stability Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system. FEATURES: Multi. Protection circuits, Gas-Tube+ TVS technology Dual protection in Common mode and differential mode TVS array technology, low capacitance Multi-Strike Capability Patent technology TECHNICAL PARAMETER Model POE5-48 Power Parameter Working voltage Un 48V Max. continuous operating voltage Uc 60V Nominal discharge current8/20µsIn 5kA Max. discharge current 8/20µsImax 10kA Protection level 8/20µsUp 150V Protection line 4/5, 7/8 Ethernet Parameter Max. continuous operating voltage Uc 5V Limiting voltage (10/700µs) Up Line-Ground â?¤500V Line-Line â?¤20V Nominal discharge current8/20µsIn 3kA Max. discharge current 8/20µsImax 5kA Adapt transmission rate 100Mbps Insertion loss â?¤0.5dB Protection line 1/2, 3/6

3P+N 40kA lightning surge protection device This surge protective device( hereinafter referred to as SPD) are suitable for AC 50/60Hz, rated voltage up to 380v IT,TT,TN-C, TN-S,TN-C-S and other power supply system,  it protect to indirect and direct lightning effect or other transient over voltage  SPD design according with GB18802.1/IEC61643-1 standard. Specification details: Model PQ2-40 Poles 4P Max. continious working voltage(Uc) 420V AC(can customized) Nominal discharge current(In) 20kA Max.discharge current(In) 40kA Voltage protection level(Up) 1.8kV Matched circuit breaker/Fuse 32A Response time

Product description Low voltage surge protective device Rated release current: 5, 10, 15, 20ka Voltage protection level: 1.0, 1.5, 1.8, 2.0kv Product feature Ebs1u surge protector protect electric and electronics equipment against transients, originating from lighting, switching of transformers, lightings and motors. These transients can cause premature ageing of equipment, down time, or complete destruction of electronic components. Surge protector are strongly recommended to install to protect sensitive and expensive electrical equipment such as tv, video, washing machine, pc etc. The main protection spds can be installed directly after the main switch or type s rccb in any supply system such as tt, tns, tncs. Product specification/models Model: ebs1u surge protector Standard: 61643-1 Max. Continuous working voltage: 140, 275, 320, 385, 400, 420, 440v Rated release current in (ka): 5 10 15 20 Max. Release current: 5, 10, 15, 20ka Voltage protection level: 1.0, 1.5, 1.8, 2.0 kv Rated voltage ue (v): 230/400 Poles: 1, 1p+npe, 2, 2+npe, 3, 3+npe, 4 Rated frequency: 50/60hz Protection level: c, d Response time:less than 25ns Standard export carton

Basic Parameters a) Rated voltage (Un) 230v~, 120v~ b) Rated current (In) 10A, 13A, 15A, 16A, 20A; c) Rated frequency (FN) 50Hz/60Hz d) Life: circuit protection device: 10,000 times; normal operation: 8000 times. Protection Functions: 1, Leakage protection(GFCI function): When body touchs electricity, earthing is unusual, power will be cut soon within 25ms. There will never be danger of electric shock. 2, Surge protection: Power will be cut at once when surge or thunderstroke, in order to protect all working electric equipments. 3, Overcurrent protection: Protect all working electric equipments from surge and heavy current in circuit. 4, Short circuit protection: Power will be cut within 25ms when short circuit happens. 5, Overvoltage protection: Protect electric equipments when external voltage exceeds standard. 6, Undervoltage protection: Protect electric equipments when external voltage is under standard. Energy-Saving: 1, Alternation current reactive power compensation energy saving: Reactive power compensation built inside, in order to improve electro-power factor, adjust network voltage, reduce circuitry waste, improve quality of power supply. This can save 10%-30% electricity. It specially works well for electric machines such as fridge and washer. 2, Time-delay standby / Timing energy saving: This product includes time-delay energy saving component and timing energy saving component (optional). Time-delay component can stop power supply automatically to avoid electricity waste, while electric equipments are standby. Timing component can define any power off time within 24 hours, with easy operation. Product characteristic: A, Zero power dissipation permanent magnetism breaker module built-in, safe without delay. B, Produced with silver alloy contacts, safe and reliable with excellent electronic conductivity. C, Case is produced with PC fire-retardant material (94UL-V0). Inside material produced with heat resisting nylon. D, Copper components produced with extra heavy phosphor bronze, with high metal memory, can be pluged 8000 times. E, One-button smart test function, can test protection function of product to avoid malfunction. F, USB charger component (optional), supplies DC 5V power for all kinds of usb products. G, Neoteric cable fixture on side of socket, can fix cables of electric equipments and makes them orderly. 45*45*40 cm ,1 kg for 1 pc.

DK-nDCt/RJ45 series network signal surge protective device(SPD) is designed according to IEC61312 standard. It is suitable for lightning protection of computer, switch and other network equipment. With features of integration metal structural design, high discharge capacity and fast response, it can ensure the equipment to work properly.

Model no.: 07d561k-240 Certificates: ul, csa, vde, cqc Specification: Rated voltage: 560v Tolerance: +/-10% Max. Allowable voltage: 350vac/460vdc Max. Clamping voltage:920v Max. Energy (10/1000s): 58j Withstanding surge current(8/20s): 1200/600 Lead configuration: straight/outside kink/inside kink/vertical kink to be option Lead spacing: 5.0mm Operating temperature range:-40 , ~ +85, Temperature coefficient of clamping voltage: 0 ~ 0.05% / , Storage temperature : -40 , ~ +125, Hi-pot encapsulation : 2000v Expoxy coating insulation resistance: > 1, 000 m ohm Application: Metal oxide varistors have many advantages and can be used in many different types of applications for the suppression of mains borne transients from domestic appliances and lighting to industrial equipment on both ac or dc power lines. They can be connected directly across mains supplies and across semiconductor switches for protection of transistors, mosfet, s and thyristor bridges. Blow main appliances that metal oxide varistor used. A. Led lights. B. Cordless phones, mobile phone chargers, telecom power systems, wireless base stations. C. Audio and video devices, automation control systems, surge protection device. D. Security system, fire alarm systems, industrial control contact relays

Djx specialized in carbon graphite materials and products for more than twenty years, we are confident to provide you high quality products with the most reasonable price, please join us to enjoy our quality and services. Djx supplies graphite plate for spd surge protection device with various sizes, customerized products are available depending on your pictures and drawings, we will recommend the most suitable graphite material for you, please contact us for more details. Based on the disadvantage of traditional gap surge protector (spd), and combined with the material characteristics of graphite and thompson gas discharge theory, a large scale of experiments on the new type of graphite gap spd were completed by open circuit voltage wave generator and icgs impact system. The results show that, after the high voltage trigger capacitance device was added to the new type of graphite gap spd, every gap was triggered step by step so that the voltage protection level was reduced. At the same time, the graphite gap spd is better than traditional gap spd on time delay characteristics, and is able to achieve the arc extinction requirements before the power frequency voltage dropped to zero. In addition, graphite belongs to non-metal materials; it won't produce plasma under high temperature, which can improve the stability of device and delay aging.