4S Spray Paint is a multipurpose use Spray Paint available in different colors with quick dry technology & gives perfumed glowing finish & can be easily used on any office equipment, household appliances, glass, furniture, car, bike, etc. to give them new look.
4S Spray Paint is a multipurpose use Spray Paint available in different colors with quick dry technology & gives perfumed glowing finish & can be easily used on any office equipment, household appliances, glass, furniture, car, bike, etc. to give them new look. https://samrajpolytexltd.com/ Min. order Quantity - 96pcs. We are Manufacturer and looking for Resellers/Dealers.
1) This product is a kind of quick-drying thermoplastic acrylic acid 2) The paint coating is quick-drying, hard, thick and has an excellent luster adhesion,toughness and shock-resistance 3) Easy to operate, with good atomization and sufficient spray 4) Its beautiful colors are good for decoration, with protecting function 5) Widely used for the protecting decoration of the surface of metal, glass and ABS plastic ONE 20'Container can be loaded for 2500 cartons,12cans per carton
Waiting Between Coats - Hours : 1.0 Hard Dry- Hours : 1 Shelf life (months) : 18 * Practical spreading rate can vary depending on application conditions, the geometrical complexity of the structure, weather conditions, etc. Allow approximately 25% as a loss factor. ** Drying time at 25 deg. C and 65% relative humidity.
Integrated cascade, excellent atomization, high transfer efficiency and ultimate safety standard. There are a few models available, all of which function with stable performance, achieving excellent surface finishing result and coping with the difficulties to most competitive suppliers.
Odor, color, grade: Corresponding color, little odor General physical form: Liquid Autoignition temperature: No data available Flash point: Not applicable Boiling point: 212 of Density: 1 [ref std: water=1] Vapor density: No data available Vapor pressure: < 20 mmhg [test method: estimated] Specific gravity: 1.01 [ref std: water=1] Ph: 6 - 7 [details: undiluted] Melting point: No data available Solubility in water: Complete Available size: 8 fl.0z, 10 fl.Oz... Available color: matt, gloss, white, black, grey, red…
Odor, color, grade: Corresponding color, little odor General physical form: Liquid Density: 1 [ref std: water=1] Vapor density: No data available Vapor pressure: < 20 mmhg [test method: estimated] Specific gravity: 1.01 [ref std: water=1] Ph: 6 - 7 [details: undiluted] Melting point: No data available Solubility in water: Complete Volatile organic compounds: 0 g/l Percent volatile: - 95 % Voc less h2o & exempt solvents: 75 Viscosity: 50 - 200 centipoise Spray paint packing: pcs/ctn= 12pcs/ctn Aerosol spray paint can: 400ml tinplate aerosol can Spray paint carton dimention: 0.0115cbm fibreboard
These products can be applied onto safety signs, bicycle, motorcycle, automobile and indoor/out door decoration. Application: 1.Public emergency exit, safety exit. 2.Home safety assistance: power switch, flash lights, stairs, door knob 3.Outdoor activities equipments: helmet, tent, raincoat, etc 4.Autos: bicycle, motorcycle, auto body pattern, aluminum ring, steel ring. Volume: 140ml Packaging: 12 cans/box Color: green, yellow, red, blue, semi-transparent olivine and blue.
Spray Painting guns with integrated cascade, excellent atomization, high transfer efficiency and ultimate safety standard. There are a few models available, all of which function with stable performance, achieving excellent surface finishing result and coping with the difficulties to most competitive suppliers.
Silicone resin ingredient ensures painted films to stand integrated after exposed at 300degree for a long period of time. Be sure to stand much higher temperature, to 600degree. Widely used on films which will work with high temperature. It is humidity resistant, waterproof and weather resistant. Be sure not mix it with gasoline. Product spec: 400ml Packing: 12cans/carton
Specification: Suncity high Gross Enamel is an tough and durable high gloss finish, which can be use on interior and exterior environment such as building constructions, metal, wood and dry concrete surfaces; indoor and outdoor furniture, etc.
Features Over roll size (7.0x5.6x3.4) m Inner size (6.9x4x2.8) m Working temperature 60-80 oc Entrance door width 3.0 m Entrance door height 2.7 m Service door included Air in-taker qty 02 Control system made in china Filters, Italy made. Installation filter holder type Heating system-diesel burner. 20' container.
GuangLi Spray Booth --Wall panel: sandwich style, Î´=50mm, polystyrene. rock wool available as required. --Basement: steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional. --Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. --Ramp: 2 pcs of vein board.--One 7.5kw intake fan and one 5.5kw exhaust fan. --4m straight exhaust ducts, one 90Â° bend, and one 60Â° bend.5m straight chimney and 2 small bends. --Spraying/baking transition damper, automatically air controlled. --Heat exchanger: stainless steel. Riello G20 burner. --Roof filter: 4 pcs of filter, mounted above support frame,which is made of steel and powder coated. --2 pcs of floor filter and 1 pcs of outlet filter.--Upper light: 10 sets, 4*40w per set. side lights: 8sets,2*40w. --Control box: components is import, overload, overheat, phase-lacking protection, straight driven motor. --Automatically stop when preset time is up.Constant temperature spraying. --Environmental filter: the equipment can be adopted M style activated carbon or drawer style activated carbon as optional. Technical Specifications External size(m) 7.0x5.3x3.5 Internal size(m) 6.9x3.9x2.7 Door width (m) 3.0 Door height (m) 2.66 Air flow (m3/h) 24000 Inside on-load air speed(m/s) 0.3-0.35 Power (kw) 16 Vehicle suited Saloon car
Spraying robot, also known as spray painting robot, is an industrial robot that can automatically spray paint or spray other coatings. General workpieces such as metal workpieces or plastic workpieces will be sprayed surface to finish the surface treatment. Common surface spraying methods include Spray Paint and Electrostatic Powder Coating. Do you know the difference between Spray Paint and Electrostatic Powder Coating? Differences between Spray Paint and Electrostatic Powder Coating: 1. The effect of Spray Painting is mirror. The effect of Powder Coating is mostly frosted surface with small holes. 2. The paint is thinner than the powder. The paint is about 30 microns in size. The powder particles are about 60 microns. 3.The smell of paint is harmful to health. Small powder pollution, small and environmental impact on workers' health. 4. Paint is volatile matter, so the Curing temperature in the Curing Heating System is below 150 degrees Celsius. The temperature of the Powder Spraying workpiece in Curing Oven needs to be between 180 and 220 degrees Celsius. 5. The same grade of Powder is cheaper than lacquer. 6. The strength of the powder is better than the ordinary paint. 7. Powder Spraying can be in place once. And the powder that falls into the groove in the Spray Room can still be used repeatedly to save cost.
Pass rohs standard, environmental formula paint. Can be applied onto wood, metal, acrylic, styrofoam, plastics (pe & pp are not allowed) products and other items. Can be clean with water before it dry. After dry, can be clean only with alcohol. Safe for children to use. Coverage : 0.9~1.5m2 (2 rounds of spray) 24pcs/ctn