Product: thermoplastic road marking paint Used for: asphalt and concrete Raw materials: c5 petropols, eva, pe wax, titanium dioxide, filler materialsâ?¦ Appearance: powder Color: white/yellow (or other colors according to buyer's requirement) Coating thickness: 1.6mm-2.0mm Abrasion resistance: 56.8 Glass beads: 0%/10%/20%/25%/30% Softening temperature: 90-104â°c Heating temperature180-220â°c Drying time after marking touch dryâ??3 mins full dryâ??10 mins Shelf life 1 year Storage: store in a tightly sealed container in a cool & dry place Area of line: 1 ton thermoplastic paint can mark about 200 m2
Product formation: Be composed by acrylic resin, special resin, pigment, filler and organic solvent. It is the ambient temperature self dry solvent type coating , product features:, film hard and durable, high compressive strength, good adhesion, excellent wear resistance, weather resistance. technical data:, color and appearance of paint film colors and smooth film, viscosity (stormer viscometer), ku 80-100, dry film thickness, um 60-70, drying time (25, ), h surface dry1h, hard dry12h, fully cured 7d, adhesion (zoned method), class 2, impact strength, kg, cm 50, bending strength, mm 5, wear resistance, mg, 1000g/200r 50, flexibility, mm 2, water resistance 72days, , using:, widely used in the road, traffic crossing, workshop, warehouse, stadium and other places to set the line, , packing:, paint:20 kg/bucket.
Adopt special acrylic resins as the main raw material and have excellent adhesion and good whether resistance. Scientific mixture ratio makes the paint with high solid content which ensures the paint can be stock for a long time without deposition. The marking coat is thick and can be sprayed with reflective materials for a long-term reflective ability. The coating dries fast and the drying time are about 7 to 10 minutes under normal temperature. 25kg/bag.
According to the engineering and construction experience, it is recommended that the conditions of use for marking for different roads, different regions, the choice of the traffic painting type and painting materials. applied. Solvent-based marking paint. It is a traditional type road marking paint, and it has the advantages of low cost, fast construction, easy to operate, adaptable, commonly used in urban road markings and less demanding provincial highway. Hot melt spray coating material. It is based on the thermoplastic hard resin-based material preparation, the powder room temperature. Construction of special equipment (thermal reactor) the coating is heated to 180 degrees Celsius to 220 degrees Celsius, the formation of a flowing liquid, coating the road to form a hard film. Hot melt marking paint contains reflective glass beads, reflective well. Hot melt spray-type marking film thin (8mm-2mn), construction speed, spray marking table uniform, neat edge, concept of linear Off. Anti-pollution performance is better than ordinary hot melt coating. By changing the coating material applied to the road of the city towel, and anti-pollution facilities after marking performance is greatly improved compared directly and room temperature coatings. Cracks are smaller than scratch-painting. Hot melt spray road marking paint used in the construction of low-pressure gas, centrifugal coating, marking after the film has no internal stress, at the same time marking the coating is thin, subjected to temperature changes caused by the shrinkage stress is relatively small. Higher value of anti-slip. Hot melt spray road marking is a uniform coating on the pavement, the marking surface after the completion of the original road, thus marking slip resistance. Henan dayu road marking machine Co., Ltd. was founded in 1992, is a leading professional traffic lanes coating facilitie manufacturer in China. Road machinery production base covers an area of 1.7 million square meters, with a construction area of nearly 100,000 square meters. Henan Dayu Road Marking Machinery Company, is internationally renowned lanes painting machines supplier, represented by special road lane construction machinery, highway road marking paint,and dedicated electronic traffic safety facilities,including thermoplastic spraying machines, cold solvent road marking machine, air-auxiliary lane coating equipment, two component road marking machines, auxiliary road marking equipment and kinds of traffic lines coating materials, respective for machine types. 20 kg
It has an excellent compression-resistance after molding and curing. When vehicles pass the line, it will generate corresponding frequency of the vibration and roaring, which have a good safety warning effect. So some roads use it as safety measure on some dangerous section to wake up sleepy drivers or remind motorists or drivers dangerous ahead. In the rainy night, the convex points which reflect light to the drivers play an audible warning on highway road. z
HR-R type are special resins for holt melt road marking paints,which can enhance the tenacity,rigidity and adhesive force of dope and form smooth paint surface.Also ensure the stable state of the resin in the four seasons by adding auxiliary agent and have a better mixing with resin.In the mixing of top-grade paint,it can form such features as water-proof,anti-ultraviolet radiation,anti-chemicals and improve the brightness and dryness of the surface.
Lutong "fantastic road" selected product series, use pure flat glass as major materials compared with standard product series, it has the advantages of higher roundness, less impurity, higher refractive index etc, and can meet high quality requirements of customers in the road construction. According to the different standards of road marking in different countries, our company can offer the glass beads of chinese ministry of standard (jt/t446-2001)/ american standard (aasto m247, m248), british standard (bs6088a, bs5088b), japanese standard (jis), korean standard (ks1#, ks2#), the european standard (en1423, en1424) etc, and we can also produce glass beads according to customers' requests. Specifications: Main components: sio2, na2o, cao Refractive index: 1.5 above Color: colorless and transparent (or white) Shape: spherical particles, good fluidity. Size range:1-2800micron (graded according to customers' requirements) Roundness: 80% above (graded according to customers' requirements) Density: 2.4-2.6g/cm3coated: according to customers' requirements 25kg, plastic woven bag.
we are one of the biggest manufacturers in Vietnam. Our main products are: GUM ROSIN ROSIN MODIFIED MALEIC RESIN ROSIN GLYCEROL ESTER ROSIN PENTAERYTHRITOL ESTER ROSIN RESIN FOR ROAD MARKING PAINT ROSIN MALEATE . I am happy if you make some interest in our products . i want to offer and hope to make a new business relationship together. Our website: vinhconship.com.vn, you can read more information on it. To get sample or get the best price, please send me email.
Fsr series resin is specially design for road painting. Itemfsr95fsr100fsr100afsr100bfsr105fsr110fsr125 Softening point ?95-10097-10397-10397-103102-108107-113123-128 Color ( gardner color 50% toluene solution)¤4¤4¤4¤4¤4¤4¤6 Acid value (mgkoh/g)¤20202020202030-40 Relative density (20?0.031.061.061.061.061.061.061.06 Ash content %¤0.20.20.20.188.8.131.52 Flash point ?230230230230240240260 Application: mainly use for hot-melt road-marking paint. Product feature: using this series of road marking paint resin has resistance pressure, wear, anti-pollution and moderate leveling property, strong coating adhesion, fast dry speed, excellent anti-yellow variable, resistance aging performance and tg performance, the advantage of tra products is fast dry, and not stick dirty, good gloss degrees and color ; dissolved in variety organic solvent , such as toluene, xylene, oil ether, ethyl acetate, acetone, and vegetable oil. Package: 25kg net in pe bag or paper bag. Safety attention: waterproof, fireproof, away from flammable item and peroxides. Remarks: can produce according to customer?s specific requirement or method.
Road lines reflective principle is relied on the directional reflection effect of the glass beads sprayed and painted on the road surface. When the incident illumination enter into the glass beads body since the air is light-repellent substance, glass beads are optically dense substances, and thus produces the refraction phenomenon and deep fold to reflection within the lines coatings and in the contact surface of the glass and coatings. Features of dayu brand thermoplastic road marking materials 1. Fast drying and relatively good abrasion resistance: The road will be open to traffic after 10 minutes for its fast drying, and can be maintained for over six months. 2. Good adhesion: There will be no stripping on the condition of assure the road surface is dry and clean and film thickness before coating road materials on it. 3. Bright and beautiful: Bright in color and meet industry standard. Road Marked Lanes with no yellowing, discoloring, cracking, but strong visibility. 4. Convenient construction: No special requirement for construction machine. Both equipment painting and manual spraying type are proper. 5. Brand traffic marking materials are made of high quality raw material, and its whole production processes of thermoplastic machine paint are finished by completely automatic production line, absolutely avoid quality defects caused by artificial operation, such as over large mixture ratio, unstable quality, and further make sure the traffic coating paint of high quality to customers.
Description: This kind of c5 aliphatic hydrocarbon resin is applicable for hot melt road paint, which can enhance the tenacity, hardness and adhesive force of the paint, then form smooth paint surface, and could keep its stability in different temperatures of seasons by adding auxiliary agent. Resins characters: Pale yellow thermoplastic granule resin. Better compatibility with gum resin. Good fluidity Make the filler dispersed uniformly and no sedimentation High anti-abrasion Promote fast drying speed of paint Increase paint's strong dirt-resistant Application: Hot melt road marking paint
Dy-hal-i/ii and dy-hal-iii/iv are hand-push airless cold solvent traffic lines marking machine, mainly used for small scale road line marking such as the zebra crossing marking, stop line, sports line, special letters and arrow mark, etc. 1. Firm welded frame chassis, is chrome-plated or corrosion resistant coating sprayed. Equipped with imported high-speed bearing, the whole machine is much lighter and more convenient. 2. Front wheel directional device can lock the front wheel to ensure the road-marking machine move freely in striping straight lines and turnings marking. 3. Adjustable guide rod can be freely adjusted up, down, to the left or right. 4. Equipped with high light warning lights makes the night working convenient. The flicker frequency can be freely adjusted, which greatly improved the safety of the marking work. 5. The new-type diaphragm type high pressure airless paint pump is with big flow and stable pressure. 6. Paint tank is with a build-in filter device and air in-take filter in the feeding port. 7. New-type manual spraying guns with reverse washed nozzle can make the road paint on-spot discharging easy and convenient. 1600*1200*1500mm(l*w*h)
The hot-melt coating is a high degree of automation machinery. Road line marking construction requires a several equipment from melting expect all aspects of construction marking function. The equipment by the thermal reactor marking machine (including the zebra crossing marking machine), the pre-marking machine hydraulic pre-heater, under the paint of the basic configuration. Of course, the user can be different models, different grades and different functions according to its economic strength, the size of the project amount and degree of specialization of different optional equipment configuration. Configuration in hot melt marking machine can be divided into the hot melt screeding type, hot melt extrusion and hot melt spray three types based on their crossed. Thermoplastic road marking room temperature marking machine: normal temperature marking the oldest a conventional marking, such marking is generally a normal temperature marking machine to complete the construction. Double-cylinder pre-heaters normal temperature.
But the relatively high price of the nozzle. Equipment carrier steel-brush remover classification the vehicle marking machine: driving horse forms of driving the vehicle before and after the device machinery used in large-scale projects, long-distance construction crossed, the operator must understand the driving technology-driven walking, road making paint pre-heater for sale saving time and effort. Self-marking machine: hand drive form, mechanical drive unit, self-help walking, without human help, applied to large and medium-sized projects, vehicle operation inconvenience excursions construction, smart and easy to operate. The hand push marking machine: walk booster form manually push the rotary skating device requires the use of human walking, for use in small projects, short construction activities convenient road marking paints and flexible operation. According to the construction of the classification of raw materials hot melt marking machine: up gradually developed to improve with the development of.
Raised marking machine is the same with the marginal line of highwayíóshowdown the marking in front of the toll-stationíóturning point of the highwayíófast lane of the cityíóthe entrance to elevated road circuit and so on.At present,this machine is widely used in the developed country.when driver is tied and not fix attention on driving,the marking have the shake effect to the vehicle and the audio fillip effect to people's ears and can give the drive caution in time.Eventhough the drive driving in the night or the rain,the high solid reflector effect can make the driver distinguish the driving direction and lane,then can remind forced speed reduction of vehicles and reduce traffic accident. The characteristic of the structure:Automatic raised marking machine can achieve marking one time one machine and can set up the height and distance of the raised marking ,according the systerm of microkitíósensoríópneumaticíódrive and so on.The marking which marked is clear and orderliness,has the effect about counteracting distortion and impactíówearable and so no. The technic parameters: Engine:Bentian OHV4stroke cold oil engine. Drive system:automatic oil hydraulic nonpolar shift system Rated power:6.5HP Marking speed:0-4km/h Grade climbing:15íp Capacity of coating color tank:120kg(60L) Capacity of the glass bead:15kg Hopper :150mm/200mm/300mm Raising line height:3-7mm Figure dimension:length 1350mmí-extent960mmí-height 1200mm Weight of complete machine:265kg