The introduction of PPR piping: 1. PP-R pipe, also called polypropylene random copolymer pipe (PPR-C) is a new generation of green building material developed. 2. As light as other common plastic pipes, it is corrosion-resistant and ant scaling, and has a long life span with its excellent hygienic properties and good thermal endurance quality. 3. It is genuine green building material in reality as well as name for its low coefficient of heat conductivity, heat preservation, energy conservation, easy installation, dependable hot melted connection and recyclable materials. 4. Unlike copper-plastic composite pipe, PPR-C pipe can have heavy caliber pipes produced, with a maximum caliber of over 160mm
Features Healthy and non-toxic, free of stain and scale. High temperature resistance (maximum water temperature up to 90) and pressure resistance (over 5MPa). Hot melting connection makes the pipes and fittings into on body, so leakage is effectively prevented. Excellent heat-insulation property from minimum thermal conductivity (only 1/200 of that of metal pipes). Light weight (approximately 1/8 of weight of metal pipes), easy to handle and transport. Smooth inner walls reduce the pressure loss and increase the flow speed. Low noise (reduce by 40% compared to galvanized steel pipes). Soft colors and excellent design are suitable for installation either exposed or hidden. Excellent ability in chemical corrosion resistance. Easy and fast installation minimizes your cost. Over 50 years of service life under normal condition.
Ppr pipes are manufactured under din8077/807 standard their applications are residential cold and hot water system Underground heating system Conveyor of industrial water and chemical materials Sanitary and pure water pipelines Hot water recycling system Compressed air pipelines Drink manufacturing and conveying system Other industrial and agricultural pipelines also for heavy pressure air flow.
Brl Borella Pipe and Fittings produced from PP (Polypropylene Random Copoylmer) raw material according to TS 9937.
PPR pipes are for water supply, including hot water and cold water, size is from 16mm to 160mm.
Nominal outside diameter: 32mm Wall thickness: 3.6mm Length: 4m Characters of PP-R: 1.Healthy and non-toxicity: our products are green construction materials, can be used as drinking water system. 2.Corrosion resistant and non-scaling: avoid stain in the basin and bath caused by corrosion, blockage caused by scale. 3.Withstand high-heat and high-pressure :the highest water temperature is 95ípC. 4.Good capability of heat preservation and energy saving: 1/200 thermal conductivity of metal pipes. 5.Light in weight: 1/7 of metal pipes. 6.Fine appearance: smoothbore, small flow resistance, soft colours and attractive design. 7.Easy installation: hot melt connectivity techmology, safe and reliable.8.Long service life: under the regulated long-term continuous working pressure up to 50 years. Normal packing
We are a manufacturer & exporter of ppr pipe & fittings, upvc pipe & fittings british standard, iso certified. International standard
Feature: 1.Good resistance to high pressure and temperature(100c) 2.Non-toxic and sanitary 3.Good chemical resistance 4.Less noise, higher flow rate 5.Long service life (50 years) 6.Recyclable, benefit for the environment 7.Simple and reliable connection, joining by fusion 8.Thermal conductivity resistance 9.Light weight Advantages: 1.Raw material vestolen p9421 from sabic europetrochemical 2.Sweden bodycote polymer ab institution 8760 hours product test 3.Production standards: din8077/8078/16962 4.Three colors: white, green, gray 5.Quick delivery time: one 20ft / 2 days 6.Brass insert fittings without nickel 7.Reasonable prices 4m straight length or according customer requirement
We are one of the main producer of PPR-C type 3 pipes and fittings and proud of our quality and pricing. Our products comply with Turkish, Russian, European Standards, and our quality is assured by ISO 9002.
Ppr pipe Zhejiang mingda pipe industry co., ltd, located in zhuji city, is a specialized manufacture and exporter mainly in the line of pipe industrial products such as aluminum plastic pipes, pp-r composite pipes, copper pipes and pump connectors, etc. In today's market economy tide, the company has steadily developed into a large-scale enterprise integrating with products-research, manufacture and export-trading, and we own a recruitment of high-qualified employees that guarantees us to provide products of high quality and exquisite workmanship. Persisting in the managing idea that "quality is life-line of the company", we concentrate on corporate inner management and high quality production system. The insurance of mingda's product is effected with the people's insurance company of china, and the company has been granted with the iso9001/iso2000 international quality system certificate. With high quality and good after-sale-service, our products enjoy a fast sale in southeast asia, middle east, central africa and europe, etc. And well appreciated by their purchasers. In trade with our customer we adhere to the principle of equality and mutual benefits, and we are committed to fulfilling requirement from our customers. Meanwhile , with expectation to promote the sale of mingda's products in the word market and to seek for long-term cooperative relationship with our potential clients, we cordially welcome all enquiries from both at home and abroad. 20*45p25*45p32*45p45p40*45p50*45p63*45p75*45p90*45p110*45p160*45p
Ginde company general adopts the ra130e pp-r chemically raw material from finland and north europe in the production of pp-r tubing product and pipe fittings. The material is recognized as the top raw material by the professional in this vocation. The preferable performance of this material and its stability establish the high quality station of ginde pp-r tubing product and pipe fittings on the market.
We are the source manufacturers of your products. Our products: PP COMPRESSION FITTINGS, PPR PIPES, PPR FITTINGS, VALVES and MOULDS.
caliber form 20mm-160mm S2.5 S3.2 for hot water S4.0 S5.0 for cold water.
Applications: 1) potable water pipe networks for cold and warm water installations; i.e. in residential buildings, hospitals, hotels, school and office buildings, shipbuilding etc. 2) pipe networks for rainwater utilization systems 3) pipe networks for compressed air plants 4) pipe networks for swimming pool facilities 5) pipe networks for solar plants 6) pipe networks in agriculture and horticulture 7) heating pipes for residential housing 8) pipe networks for industry, i.e. Transport of aggressive fluids (acids, Alkali, etc.) 9) transport of liquid foods ements .
Mplast being among the leader (polypropylene) pprc plastic pipe systems and components manufacturers, has been improving the security and comfort of the healthy superstructure installations, structural and industrial constructions transmitting capacity and industries in Europe by making the production with a passion to catch the excellence and professionalization in the quality since its days of establishment. Being among the big industrial institutions in Bulgaria, Mplast started the production with the polypropylene pipe systems and components and later gave a speed to investments in infrastructure systems. Mplast continues its activities with two main areas as pprc pipe systems and components infrastructure and superstructure. This leader brand marked with its work with super structure in all areas, Mplast keeps holding its leadership position in the world. Mplast has become a big company with its experience in the sector it is included with its competitive and innovative structure and makes exportations to 27 countries today all over the world. We have a contact office in Turkey for pprc pipe systems and components exports.
Mplast being among the leader (polypropylene) pprc plastic pipe systems and components manufacturers, has been improving the security and comfort of the healthy superstructure installations, structural and industrial constructions transmitting capacity and industries in Europe by making the production with a passion to catch the excellence and professionalization in the quality since its days of establishment. Mplast being among the leader (polypropylene) pprc plastic pipe systems and components manufacturers, has been improving the security and comfort of the healthy superstructure installations, structural and industrial
Quick details: Place of origin: baku, azerbaijan Material: hdpe Thickness: 1.9-15 mm Item: polypropylene ppr pipesprotection rating: ip65 Certification: iso9001 Color: white Standard: ohsas 18001 Specification: as your requirement Od: 20-90.0 mm Type: pn-10, 16, 20 Length: as your requirement Packaging & delivery: Depends on your order. Description: Advantages of pipes: • Quality: raw materials used in our factory are mostly produced in europe and correspond the requirements of din, tse, iso 9001 standards. • Reliability: systems assembled from these pipes have high temperature and pressure resistance. • Pipes service life: garantee of these pipes is 50 years and it can be changed depending on used temperature. • Corrosion and chemical resistance: pipes are corrosion and aggressive environment resistant. • Flow rate: due to the smooth inner surface these pipes has increased flow rates • Ecological cleanness: operation polypropylene does not enter into the reaction with water, thereby does not add foreign flavor to water. Its inner surface is lubricous, therefore, formation of bacteria, organic and non-organic sludge is not observed.
Competitive Advantages of the product: 1. High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius. 2. Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe. 3. on-toxic: no heavy metal additives would not be covered with dirt or contaminated by bacterium. 4. Corrosion Resistant: resist chemical matters or electron chemical corrosion. 5. Lower Installation Costs: light weight Standard: GB/T18472, ISO15874, DIN 8077 8088 Color: green, grey and white Length: 4m/pc or customerized
Material: PPR HYOSUNG R200P from Korea , Borealis A140E Technics: Injection Place of Origin: Zhe jiang, China (Mainland) Connection: Welding Shape: Equal, Name: PPR Pipe Plug Color: Green White,Grey ,etc Surface: Smooth Pressure Rating: PN20 Size:20mm-32mm OEM Available Standard: ISO 15874: DIN8077-8078 Production temperature: -40 - +95Â°C Certification: ISO9001, ISO1400 -