Pneumatic butterfly valves conbined a piston within a cylinder and our various connecting butterfly valves. They are not only developed to single effect ( air/ spring ) but also double action ( air/ air ) in case of the actuator euqip with professional control box which is designed with various options such as proximity type, micro swith type and electrovalve 1 up to 3 pcs by requested.
Each per ploybag, 100pcs per carton box, then into plywood box
Reliable Pneumatic Globe Valves Supplier in China
Supcon is one of the leading Chinese manufacturers specializing in globe valves with a wide range of globe valves and complete specifications. Our globe valves are exported to Southeast Asia, the United States, South America, Europe, the Middle East and Russia; globe valves are widely used in most important construction projects with their high quality and good service.
What are the advantages of globe valves?
Excellent shutoff capacity
Moderate to excellent throttling capacity
Short stroke (compared to gate valves)
Available in T-, Y-, and angle designs, each with its own advantages
Seats are easy to machine or resurface
Globe valves can be used as shutoff check valves when the valve flap is not attached to the stem.
Pneumatic Globe Valve
A pneumatic globe valve is a specific type of control valve that employs compressed air or gas to regulate the flow of fluids within a system. This type of valve combines the features of a globe valve, known for its precise control capabilities, with pneumatic actuation for automated and responsive operation.
The primary purpose of a pneumatic globe valve is to manage and adjust the flow rate, pressure, or level of fluids in a controlled manner. By utilizing pneumatic pressure, these valves can be controlled remotely and integrated into automated systems, allowing for accurate and dynamic adjustments based on input signals.
What is a globe valve?
Throttling globe valves use linear motion to move the closing member in and out of the seat surface. Their bodies feature a spherical cavity around the port area and are designed to regulate the process flow when used in conjunction with an actuator assembly. Many single-seat valve bodies use a cage or cage-type construction to hold the seat ring in place, provide plug guidance, and provide a means of establishing specific valve flow characteristics. Cage or cage type single seat valve bodies can also be easily modified by replacing the valve internals to change the flow characteristics or provide reduced capacity flow, noise attenuation, or to reduce or eliminate cavitation.
Pressure Control Valve
Pressure control valves are capable of regulating the system pressure to adjust the force on the hydraulic piston rod or the torque on the hydraulic motor shaft. Pressure relief valves are used to set the maximum pressure in the circuit and prevent it from being overloaded. Pressure reducing valves permanently maintain the output pressure at the set value while preventing overloading of the equipment. Unloading valves are designed for economic pressure control in accumulator operating circuits and are used as a power source for emergency control.
Classification of pressure control valve
In the pneumatic transmission system, all pressure control valves work on the principle of balance between air pressure and spring force, which can be divided into the following three categories:
1. Pressure reducing valve. Also known as pressure regulating valve, setting device (precision pressure reducing valve), etc., it plays the role of pressure reducing and stabilizing;
2. Overflow valve. Also known as safety valve, pressure-limiting shut-off valve, etc., it plays the role of pressure-limiting safety protection;
3. Sequence valve and balance valve. Depending on the pressure of the gas circuit, some control is performed.
Next, we mainly introduce you this single-seat cut-off pressure control valve.
Single Seat Globe Pressure Control Valve advantages:
Hydraulic pressure control valve has Long life
1. Single Seat Globe Control Valve Valve Trims
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
2. Pressure Control Valve body
The body of LN8 Single Seat Globe Valves consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
3. Single Seat Globe Valve Actuator
The standard mate of Single Seat Globe Valves is AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive applications. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives globe valves a reliable shutoff. This type of actuator has a long life cycle with more than 1
Pneumatic Cylinder Valve A1.184.0010 Printing Offset Machine Spare Parts
Made in China
New
Sensor OPT RS PROX 00.783.0388A
Sensor EMECH SWIT POS 00.783.0675
Induction sensor 61.110.1331
Sensor INDUC SWIT PROX 61.110.1381/02
sensor 61.110.032
Sensor CAPAC SWIT PROX 61.198.1553
Sensor CAPAC SWIT PROX 61.198.1563
Front guide sensor 68.110.1322
Light barrier 91.110.1321
Sensor C2.196.1676
Reflex light barrier C4.110.1321
Sensor US BARR RECV F2.161.1421/02
Sensor CAPAC SWIT PROX F2.110.1311
Side guide sensor F2.110.1463
Sensor INDUC MEAS PROX M2.161.1533
sensor M2.198.1563
Sensor CAPAC SWIT PROX M5.122.1311/05
Slowdown Belt C3.015.453
13mm Rib Slowdown Belt C3.015.653
Slowdown Belt F4.514.578
Slowdown Belt F4.614.560/01
Slowdown Belt F4.614.821
Slowdown Belt F4.614.862F
Press Slowdown Belt F4.614.881F
SM52 Press Slowdown Belt G2.020.009
Slowdown Belt M2.015.357-01
Slowdown Belt M2.015.840F
Slowdown Belt M2.015.843F
Slowdown Belt M2.015.844F
Slowdown Belt M2.015.845F
Slowdown Belt M2.015.870
Slowdown Belt M2.015.871
Press Slowdown Belt M2.015.872/01
Slowdown Belt M2.015.878
Offset Printing Machine Slowdown Belt M2.015.880
Slowdown Belt M2.015.881F
Slowdown Belt M2.015.895
PM52/GTO52 2 Colour Drive Belt 00.270.0128
Gear Motor 71.186.5311
Small Motor 61.144.1141
Small Motor 61.144.1101
Suction drum Motor 43.112.1311
Gear Motor 61.144.1121
Register Motor L2.105.5151
Register Motor L2.105.5161
Gear Motor M5.144.1121
Gear Motor R2.144.1121
Ink Gear Motor 61.186.5311
Ink Key Motor 61.186.5311
Suction drum Motor 89.186.5151
Suction drum Motor 00.781.0658
Servo-Drive Motor F2.112.1311
Servo-Drive Motor F4.144.1151
Servo-Drive Motor 43.112.1311
Servo-Drive Motor 71.112.1311
Servo-Drive Motor 71.112.1311/02
74 Machine Register Motor 3NM IPOT L2.105.5151/02
SM74/PM74 Geared Motor M5.144.1121/02
Register Motor L2.105.5161
Servo Gear Motor M4.112.1311
Motor R2.112.1311/02
Gear Motor R2.144.1121
Motor 00.781.1882
Register Motor 89.186.5151
SM102 Machine Motor 92.112.1311
Inside Motor 61.144.1121
Offset Printing Machine Motor 61.144.121
Servo Gear Motor 61.144.1141
Servo Gear Motor L2.105.1311
Servo Gear Motor G2.144.1141
Servo Gear Motor 61.144.1161
Servo Gear Motor G2.186.5151
Servo Gear Motor G2.186.5141
Servo Gear Motor 61.144.1151
Motor CPC 81.186.5141
Register Motor CPC 81.186.5151
CD102/SM102 Machine Gear Motor 61.144.1131
Dampening Motor 61.198.1243
Motor L2.105.1311
Inside Motor 71.112.1311
Encoder 63.101.2211
K23JC3-L6 Roller Mechanical Valve for Paper cup machine
Mechanical valve refers to that the movement of the valve core is controlled by the machine. The working mode of mechanical valve is that the exhaust port is located on the body, which is convenient to install muffler, reduce noise and pollution. Multi-position valve is installed and easy to use.
Product Name: Stainless Steel Sanitary Divert Seat Valve
Valve Body Material: 1.4435/1.4301, SS304/SS316L(Forged)
Seal Material: EPDM (standard) conforms to FDA177.2600
Surface Finishing: Mechanically polishing , Sand blasted
Operating Principles: Single Seat Valve is operated by single acting or double acting pneumatic actuator, the air push valve shaft move to on and off position.This valve is hygienic design,applied to all kinds of,food processing,drink,and pharmaceutical industry.
Max Working Pressure: 10Bar/145 PSI
Max. Working Tem.: 140 degree C
Air Pressure: 5-7 bar G1/8"(BSP)
Availably Size: DN25-DN100,1"-4"
Operated:Pneumatic
Gasket: EPDM, silicone or Viton
Connection:weld,clamp,thread,
Control: Sensor, Pneuamtic actuator(single acting, double acting), electric actuato, C-TOP, C-top controller(AS-I)
Certificate: PED 2014/68/EU, FDA.177.2600
