The silicon carbide(sic) heating element is a kind of non~metal high temperature electric heating element. It is made of selected super quality green silicon carbide as main material , which is made into blank, solid under high temperature and re~crystallized. Compared with metal electric heating element, this element is characterized by high~applied temperature , anti~oxidization, anti~corrosion, long service life, little deformation, easy installation and maintenance. Therefore , it is widely used in various high temperature electric furnaces and other electric heating devices, such as in the Industries of magnet, ceramics, powder metallurgy, glass, metallurgy and machinery etc. All the specifications can be made according to your requirements. And our technical engineers are pleased to assist you! There are ed(rod) type?u type?w(three phase)type?g(gun)type?db(dumbbell)type?scr(double spiral)type?sc(single spiral)type?h type for you to choose.
Mosi2 heaters is a kind of resistance heating element basically made of high pure molybdenum disilicide.In oxidizing atmosphere, its max temperature can reach 1800 deg.C, and its applicable temperature is 500~1700 deg.C. It can be widely used in such applications as sintering and heating treating of ceramic, magnet , glass, metallurgy , refractory, ect. All the specifications can be made according to your requirements. And our technical engineers are pleased to assist you! There are u type?w type?l type(bend at lu)?l type(90° bend at lu)?straight type and other types for you to choose.
Any types and specification
Brand: yuling Material: ss304 Diameter: 8.5mm Length: 360mm Foldback: 300mm Voltage: 240v Power: 5.5kw Certificates: ce, rohs, iso9001:2008 Warranty: more than 2years -
Brand: yuling Material: ss304 Diameter: 8.5mm Length: 320mm Foldback: 230mm Voltage: 230v Power: 5.5kw Certificates: ce, rohs, iso9001:2008 Warranty: more than 2years -
Specification: New Condition Air Heater Finned Heating Element Oven Dryer are a mineral insulated, metalsheathed electric resistance heater.Finned electric heating tube is made of seamless stainless steel tube, highquality MgO, electric wire and then winded with stainless steel. Finnedtubular heating elements are available for various industrial & domestic applications. We built every technically possible heaters as per your requirement. Material of Pipe: SUS304,SUS316,SUS321,Incoloy840, Incoloy800 Material of fin: SUS304,SUS430 or As Required Advantages: New Condition Air Heater Finned Heating Element Oven Dryer 1.Low capital costs 2.Easy control of heat output 3.High thermal efficiency 4. Low need for maintenance 5. Long service life 6. Safe to operate 7. Extensive use 8.Customized to meet your specific application need New Condition Industrial Electric Oil Fin Heater
Heating element is a chemical compound that reacts with water and hydration to generate heat and is also called the 3rd energy. Principle: As calcium carbonate does not dissolve in water, sodium hydrogen carbonate reacts with water to generate 1st heat, the gas from 1st heating reacts with calcium carbonate dissolve into water to generate 2nd heat, and the remaining constituents, excluding calcium carbonate and sodium hydrogen carbonate, react with water to generate 3rd heat. With the development of food culture and rapid industrialization, various retort and instant foods have been developed and consumed. These foods are increasingly used with the popularity of various outdoor activities. However, these foods are designed to be refrigerated and need fire, boiled water, or microwave to be reheated. As it is impossible to start fire in most outdoor environments, especially in military trainings or in disasters, our heating element can be a very convenient alternate energy source. The heating element consists of eco-friendly materials and does not cause environmental pollution after disposal. Instead, it revives acidic soil into fertile alkali soil. MOQ for 120g of Heating Element = 70,000 pieces MOQ for 60g of Heating Element = 170,000 pieces MOQ for 30g of Heating Element = 210,000 pieces.
Our products are mainly used for different kinds of home appliances, such as: air conditioners, oven heaters, refrigerators, electric fan heaters and water boiler. We specialize in tubular heaters, finned heaters, immersion heaters and defrost heaters. Heating elements are not standard parts, we can design and build to your specification. We understand the importance of the quality of our products. Most of our products are certified by ul, vde and cqc . You are warmly welcomed to establish business cooperation in any kind with us and achieve a win-win outcome. Carton boxes
Heating element The products of this company are mainly applicable to chemical equipment, plastic forming and auxiliary equipment, sauna equipment, electric heating boilers, kitchen equipment, industrial cleaning equipment, commercial refrigerating equipment, commercial heaters, commercial air-conditioning and drinking equipment, solar energy equipment, electric frying equipment, wave peak welding electronic automated equipment, etc. For products, we always follow the principle of top quality and efficiency to win over clients and perform the most rigorous standards so as to ensure that the products are always in their optimal state. Therefore, the electric heating tubes and heating tube products provided by this company are in their dominating superiority in operation functions, security and service life. 1.Tube material: sus304, sus321, sus316l, sus310s, inco840. 2.Electric heating tube diameter : ¦6.6, ¦8.0, ¦10.0, ¦11.0, ¦12.0, ¦14.0, etc 3.Sealing patterns: heat resistance epoxy, glass. 4.Electrical performance: insulation resistance value is over 10000m+ and leakage current less than 0.5ma after being placed in cooling room for more than 1 year. 5.Input power and power:to be customized as required. Ok
Heating element Resistance heating elements, ptc hetaers
Heating element The milk-white (pearl-white) quartz glass tube can be manufactured into different shape as circle, pear, U and so on.
HEATING Elements Various ratings Thermostat control attached Made in Europe Technical characteristics Type Three phase with various power rating Temperature RANGE0 to 100°C CONTROLAttached The Technical characteristics TYPEThree phase with various power rating Temperature RANGE0 to 100°C Control Attached Thermostat Rating7.5KW/10KW/12KW/15KW Rating7.5KW/10KW/12KW/15KW
Zgs066-047c: Material: sus304, bluing Outer ring voltage and power: 230v 900w Inner ring voltage and power: 230v 1350w Outside diameter: f6.6mm Surface load: =5.5w/cm2 Working life: =3000 hours Cold insulation: more than 50 mo Electric heating tube life: =3000 hours Application: oven Heating tube end-use condition: heated air When using the rated voltage, leakage current is less than 0.5ma Withstand voltage: cold condition 1800v/0.5ma/1s no breakdown. Heat condition 1250v/0.5ma/1s no breakdown. The installation and outside dimension is subject to the client’s requirement - Material: sus304, bluing Outer ring voltage and power: 230v 900w Inner ring voltage and power: 230v 1350w Outside diameter: f6.6mm Surface load: =5.5w/cm2 Working life: =3000 hours Cold insulation: more than 50 mo Electric heating tube life: =3000 hours Application: oven Heating tube end-use condition: heated air When using the rated voltage, leakage current is less than 0.5ma Withstand voltage: cold condition 1800v/0.5ma/1s no breakdown. Heat condition 1250v/0.5ma/1s no breakdown. The installation and outside dimension is subject to the client’s requirement
Silicon carbide sic electric heater rod for element temperatures up to 1625, for industrial and lab furnaces/ovens, available in a wide variety of standard sizes and geometries, or in customized designs.
Molybdenum disilicide (MoSi2) heating elements a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800C during oxidizing atmosphere. According to your request, our company can produce the products of Pole, "U", "W" and "U"-right angle shapes, etc. MoSi2 heating element can usually make use of furnace temperature from 1300C to 1800C. It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature. MoSi2 Heating Element's installation: The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature. So you had better hang and erect vertically the "U"-shape element. If you need to erect it horizontally, please choose a support of high-temperature insulating materials. The cone-part of the element must extend inside the furnace. At first the fixture of MoSi2 power connector cant be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken. (Our suggestion: please choose the specialize power connector provided by our company) The furnace top must be a good function of heat-preservation. In general, the temperature of furnace top cant be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick. The Dia.6 element can't be used of 170A for a long time. The Dia.9 element can't be used of 300A for a long time. Specifications: The product includes series 1700 grade, 1800 grade. Packaging is available in U shape, W shape, Straight shape (X shape) and bend shape (L shape). The dimension ranges from 3/6, 4/9, 5/10, 6/10, 6/12, 6/14, 7/14, 8/16, 9/18 to 12/24mm. First step, packed with sponge and box case, and then put it into wooden case. Usually, 2-4 pieces of mosi2 heater are packaged in one box case.
Silicon carbide heating elements Jinyu silca sic heating element is a type of non-metal high temperature heating device. These sic productsare made from fine quality green silicon carbide as its main raw material. The raw material is made first in to a blank, followed by high temperature silication and recrystallization, and becomes high quality stick shaped sic electric heating devices. Compared with metal electric heating material, this type of non-metal elements is featured of high operation temperature, anti-oxidization, long service life, little deformation, easy installation and maintenance. Because of these advantages, sic electric heating elements is widely used in various industries that require high temperature electric furnaces and heating devices. These typical applications include electronics, magnetic materials, powder metallurgy, ceramics, glass, metallurgy and machinery. We adopt new production process of cold end, so jinyu silca heating elements have excellent specific rate of heat zone resistance and cold end resistance, saving energy, long life, avoiding over-temperature of cold ends damaging furnace body. 5