Product Name : BURNER OIL/LDO Product Description : Density 0.84-0.87 Price of product ( USD price or FOB price) : CFR MUNDRA /NEVA SHEVA USD 470-520 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details : Flexi Containers
Being a client centric firm, we are occupied in offering a wide range of Refractories Burner Block. Extensively used in burners, these blocks are well known in the market due to their high strength & fine finish. These blocks are available in various specifications like shapes, thickness and dimensions as per the requirements of clients. We have reasonably priced these block without compromising with the quality. Size Available. (In Inch) 9X9, 12X12, 14X14, 16X16, 18X18.
Oil burner nozzles are available in semi hollow cone spray pattern. Oil burner nozzles are available in semi hollow cone spray pattern. Micro-finish of tip & disc seats permitting flow only through the slots of the disc, plus extremely close manufacturing tolerances, ensure accurate capacity control. These nozzles are fitted with filter in order to provide highly efficient in depth filtration with one piece construction extra fine filter microns are supplied as standard on all small capacity nozzles. Application: LDO firing in kilns of cement, sponge, Iron plants & Dust suppression. Range : Spray Angle: 45,60,70,80 & 90. Flow rate (GPH) at 100 PSI Pressure : 2.50, 3.00, 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00 GPH. Connection : UNF 9/16 M.O.C. : SS 303
Our steam pressure reducing station are pre-fabricated manufactured ready to install units for steam system management. The pre-assembled steam pressure reducing stations are individually sized to meet end-user's specific needs. lnlet and outlet piping & valve are sized as per best engineering practices. Each unit is custom engineered and designed to meet specific system requirements. All upstream & down stream pipe work & fittings are adequately sized to ensure that only the required pressure drop occurs across the control valve itself.
This is basically A heat transfer equipment to heat air prior to entering in the furnace with a primary object to increase thermal efficiency of hot flue gases are passed through the tubes and air outside the tubes. The heat of the boiler flue gas is recovered in APH to increase the air temperature & the thermal efficiency is increased. Another advantage is that the flue gas is sent to chimney stack at lower temperature allowing simplified design of ducting & flue gas stack. It also allow controls the temperature of flue gas leaving the stack to meet emissions regulation / pollution control. Salient Features: Easy installation Low maintenance cost Robust construction Compact High efficiency
Industrial Hot Water Generators are vented systems provide temperatures up to 98°C. Pressurized systems are essentially closed loop required for indirect heating and provide temperatures up to 150°C without boiling or steam formation. The system is suitable to heat water up to 250°C with combustion of any solid fuels like wood, coal, bagasse, corn cobs, agrowaste, lignite, petcoke, etc. System is designed with all safeties & controls well defined for safe operation without lesser maintenance. Salient Features: Heat transfer efficiency Long thermic fluid life Corrosion free No scale problems No boiler regulation High temperature Abrasion resistant Easy to use Capacity:600,000 to 10,000,000 kcal/hr. Temperature:upto 200°C Fuel:Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust / Bagasse / etc
Vertical Four Pass Thermic Fluid Heater is combustion grate that gives you an assurance of the rated output on any solid fuels like coal, wood, lignite, husk, briquettes, pet coke, saw dust, bagasse, etc. without compromising on performance & efficiency. This reduces downtime leading to further increase in profitability. Every solid fuel has different physical and chemical properties which influences the design and performance of the furnace in Thermal Fluid Heater. Different combustion systems are shown in above diagrams. Low grade fuels are best handled using FBC technology to give good results. Thermal's unique design for efficient combustion suits different solid fuels like coal, lignite, wood, husk, pet coke, bagasse and biomass fuels resulting in to low operating cost, trouble free operation and lesser maintenance husk, agis best suited for some fuels with high ash content like low grade coal, paddy ro wastes etc. FBC technology ensures complete combustion, helps homogeneous mixing of fuel, maintains uniform bed temperature and leaves low un-burnt fuel guaranteeing 5 to 7% higher efficiency than any other combustion system.Options of In-Bed Tubes in Furnace is also available to control bed temperature & system performance. Fluidized Bed Combustion Technology is best suited for fuels like low grade coal, imported coal, paddy husk, petcock, etc with Auto feeding system of Over bed & Under bed into Furnace. Salient Features: Multi Fuel Fired System Cost Efficient Unit Also with Latest FBC System Automatic Firing of Solid Fuel as similar to Oil & Gas Capacity:600,000 to 10,000,000 kcal/hr. Temperature:upto 400©C Fuel:Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust / Bagasse / Palm Oil Extracts / etc
A unique design of the pre-furnace consists of lateral wall made of finned tube connected to the boiler body through headers. Salient Features: Complete gas-tight construction. Greater absorption of radiant heat. Fast water circulation resulting in accelerated start up and better boiler response to load fluctuations. Designed to give full load efficiency upto 80%. Optional FBC System for Capacity above 5000 kg./hr. for Automatic Firing. Capacity:1000 kg./hr. to 15000 kg./hr. Pressure:10kg./cm2 to 35 kg./cm2 Fuel:Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust / Bagasse / Palm Oil Extracts / etc.
3-PASS FULLY WET BACK STEAM BOILER Thermal-Max Steam Boiler Smoke tube type system boiler with three pass fully wet back design, suitable for cal / agro waste / oil / gas fuel. Salient Features: Factory-assembled horizontal package boiler. Less site work & quick commissioning Suitable for coal, wood & briquetted fuel. Manual firing - less complexity. Large integral furnace - minimum heat loss. High turn-down ration. End to end visibility of tubes. Easy access for inspection & cleaning. Quick and easy ash removal. Low excess air burners, imported / indigenous. Capacity:Oil Fired - 500 kg./hr. to 8000 kg./hr. Solid Fuel Fired - 500 kg./hr. to 6000 kg./hr. Pressure:10 kg./cm2 to 35kg./cm2
Fully Automatioc Coil Type Boiler Fully automatic, instant steam generating range of boilers designed for safe and reliable operations. Easy to install and commission, these time-tested boilers require very little maintenance. It features a specially designed furnace and combustion system to burn difficult heavy oils and offers fuel flexibility between light and heavy oils to help respond to fluctuating fuel prices. Salient Features: High Efficiency. Large Steam & Water Volumes. Less Maintenance Unique patented membrane design Built-in heat recovery device Membrane design allows large tube diameter for coil enabling better steam dryness, less frequent de-scaling, longer coil life and minimum downtime Unique economiser - optimiser design ensures maximum heat recovery without possibility of feed water pump failure due to boiling/ vapour causing cavitations and pump failure Unique circulation burner design prevents leakage and eliminates fire hazard Ceramic wool refractory allows fast cooling of top plate and easy maintenance Easy access to all parts requiring maintenance. Capacity:500 kg./hr. to 850 kg./hr. Pressure:10 kg/cm2 to 20kg/cm2 Fuel:Coal / Wood / Lignite / Petcock
Burners burners for oil, gas, coal, bagasse, and any other fuel
Steam boiler, thermal oil heaters, heat exchanger, air pre heater, waste heat recovery unit, chimney, diesel fuel fired steam boiler, gas fuel fired steam boiler, coal fired steam boiler, wood fired steam boiler, biogas fired steam boiler, agrowaste fired steam boiler, diesel fired thermic fluid heater, gas fired thermic fluid heater, biogas thermic fluid heater, coal thermic fluid heater, wood thermic fluid heater, agrowaste thermic fluid heater.
Cyclone Burner System B Art No. 333501 •Cyclone flame burners are the most efficient burners for brazing and soft soldering •The rotating flame gives an even and all-round heat transfer to the pipe •Working pressure 2 bar Hot-air System B Art No. 333401 •Hot-air burners with powerful wind proof hot-air streams for heat shrinking •3349 ideal for shrinking in confined spaces and fibre optic closures •Working pressure 2 bar Soft Flame Burner System B Art No. 334191 •Soft flame design ideal for cable work and other heat shrinking applications •To heat the sleeves efficiently but still soft enough not to overheat the shrink material •Working pressure 2 bar Standard Burner System B Art No. 334401 •Standard burners with brush-type flames for all kinds of soft soldering / small heating applications •Silver soldering about 615°C •Working pressure 2 bar Pin-point Burners System R Art No. 884204, 393802, 393902 •Pin-point burners with the finest flames for precision work such as gold and silver forging •Recommended working pressure 2 bar Pin-point Burners System R Art No. 294102 •Standard burners with brush-type flames for all kinds of soft soldering/small heating applications •Recommended working pressure 2 bar Neck Tubes System R Art No. 350101 Only for pin-point burner 884204 Neck tube Length, 78mm Art No. 351102 Neck tubes made for high quality brass Neck tube Length, 70mm Propane Hoses • Diameter 5 mm and 8 mm • EN 559 / ISO 3821 • Fixed connection type • BSP 3/8" LH connection Regulators Art No. 309129 Art No. 306119 Standard Lot Size
Biomass pellet burner for boiler, coating, drying, heat equipment, foundry and other industries, burning of biomass fuels to replace oil, gas, save 30-80% of the cost, energy saving and environmental protection. * combustion chamber temperature: 1700 * output temperature: maximum 1100 * burner outer tube material: 316 s * burner body: carbon steel pained 1800mmx1350mmx1800mm, 2ton
Monoblock burner for all types of heating application like boiler, oven, hot air generator, dryer, furnace, melting furnace, heat treatment. Standard.
Brass burner , good quality&lower price .Suitable for india factory.We supply parts for u to accembly& we can help u supply all parts of burner as required. ª¦68ú¼ª¦78, ª¦92, with pratical weight.And give u satisfied price.
We manufacture kiln from 750 deg to 1650deg for ceramic and refractory industries. We also design driers recuperators chimney. Burners and combustion systems. 0.5 cu.M to 50 cu.M.
1. Using excellent ceramic plate, wholly drawn burner housing,solid and practical, getting rid of gas leakage danger with welding housing 2. Dismantled stainless decorative retainer, good-looking and convenient. Need no drill on ceamic plate while installation,replacing damaged tiles easily, raise the maintenance efficiency, reduce the repair cost 3. Reliable orifice structure, aligning well and ensure good conbustion performance 4. Reasonble whole structure design, professional and human design mind showing here an there, high-density combustion keeping ahead in the market CTN