Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
Prominent manufacturer and supplier of various kind of Aluminium PCB . Our PCBs has very high reliability and offers cost and quality effective solutions
Aluminium base PCB/Aluminium PCB High Quality Aluminum PCB, High Quality Rigid PCB, Aluminum Board, Rigid PCB, Double Side Fr4 Material PCB, High Quality Customized Fr4 PCB, Metal Based PCB, Rogers PCB Manufacturer Layer: 1L Board thickness: 1.6mm Trace/Space:0.1mm Copper weight: 1OZ Surface finish: Immersion Tin PCBMAIN can OEM and wholesale high quality aluminum PCB, high quality rigid PCB, aluminum board, rigid PCB, double side Fr4 material PCB, high quality customized Fr4 PCB, metal based PCB, Rogers PCB.
Types: Single-sided, double-sided, multi-layers (max 28 layers) and Rigid-flexible pcb, aluminium board Surface finishing: Hasl(lf), gold plating, electroless nickel immersion gold, Immersion tin, osp(entek) Base material:Polyimide(kapton), polyester(pet), aluminium, fr4 Copper foil:Ed/ra Min. Line width:2 mil Min. Line spacing:2 mil Min. Hole size:0.2mm Max. Board size:800x400mm Min. Board thickness:0.1mm Min. Solder mask thickness:10um Solder mask types:Green, yellow, black, white, blue, red and clear Profiling:Punching, routing, v-cut Soldering thermal resistance:300°c/10 seconds Peeling strength:=1.4kg/cm Surface resistance:105mo Insulation resistance:105mo Dielectric strength:9.8x105v/cm Flammability:Ul-94v-0 Performance test: 100% electrical and electricity performance test
White Aluminium PCB Single Side Aluminium PCB Board Aluminum PCB/Metal Core PCB/MCPCB/Insulated Metal Substrate(IMS) Aluminum PCB/Metal Core PCB/MCPCB/Insulated Metal Substrate(IMS) Insulated metal substrate (IMS consists of a metal baseplate (Aluminum is commonly used because of its low cost and density) covered by a thin layer of dielectric (usually an epoxy-based layer) and a layer of copper(35um to more than 200um thick). The FR-4 based dielectric is usually think (about 100um). Compared to a classical printed circuit board, the IMS/MCPCB provides a better heat dissipation. It is one of the simplest way to provide efficient cooling to surface mount components. Among all Metal core PCBs, Aluminum MCPCBs are the most common type-the base material consists of aluminum core with standard FR4. It features a thermal metal-clad layer that dissipates heat in a highly efficient manner, while cooling components and increasing the overall performance of the products. Currently, Aluminum-backed PCBs are regarded as the solution to high power and tight tolerance applications. MKTPCB has been offering Aluminum PCB manufacturing services for over ten years. Our full-feature Aluminum circuit boards making capabilities and value-added options including Free DFM Check allow you to get high-quality Aluminum PCBs done within budget. Aluminum PCBs fabricated by us are widely used for LED lighting, Power equipment and Automotive systems. Metal Core PCB Materials and Thickness The metal core of the thermal PCB can be : 1) Aluminum (aluminum core PCB), 2) Copper (copper core PCB or a heavy copper PCB) or a mixture of special alloys, while the most common being Aluminum core PCB. The thickness of metal cores in PCB base plates is typically 30 mil - 125 mil, but thicker and thinner plates are also available. MCPCB copper foil thickness can be 1 - 10 oz. MKTPCB Aluminum PCB Capacity : MKTPCB can produce 1-Layer, 2-Layer, 4-Layer and 6-Layer Aluminum PCBs. Multilayer aluminum PCB is mainly used by high power Industrial products, like outdoor Led screens. Solder mask Color: White, Black. We can also provide Super-White color for LED PCB to improve the reflected light off of the board to increase the Lumens. The following table presents some of our Aluminum Core materials & properties :    Items Performance Index (Measured value) Peeling strength (n/mm) 1.8 Insulation resistance (�?) >1*10 g Breakdown voltage (vdc) >2 k Soakable soldering (°C/m) 280°C / 260°C, 1 min, no bubble & delamination Thermal conductivity (�?/m-k) >0.8 Thermal resistance (°C/�?) < 1.2 Combustibility fv-o Dielectric constant (1mhz) 4 Dielectric loss angle (tangent) 0.03 Our Aluminum core PCB manufacturing Capabilities: -
Single Side Aluminium PCB Board Aluminum PCB Metal Core PCB Insulated Metal Substrate Aluminum PCB/Metal Core PCB/MCPCB/Insulated Metal Substrate(IMS) Insulated metal substrate (IMS consists of a metal baseplate (Aluminum is commonly used because of its low cost and density) covered by a thin layer of dielectric (usually an epoxy-based layer) and a layer of copper(35um to more than 200um thick). The FR-4 based dielectric is usually think (about 100um). Compared to a classical printed circuit board, the IMS/MCPCB provides a better heat dissipation. It is one of the simplest way to provide efficient cooling to surface mount components. Among all Metal core PCBs, Aluminum MCPCBs are the most common type-the base material consists of aluminum core with standard FR4. It features a thermal metal-clad layer that dissipates heat in a highly efficient manner, while cooling components and increasing the overall performance of the products. Currently, Aluminum-backed PCBs are regarded as the solution to h igh power and tight tolerance applications. MKTPCB has been offering Aluminum PCB manufacturing services for over ten years. Our full-feature Aluminum circuit boards making capabilities and value-added options including Free DFM Check allow you to get high-quality Aluminum PCBs done within budget. Aluminum PCBs fabricated by us are widely used for LED lighting, Power equipment and Automotive systems. Metal Core PCB Materials and Thickness The metal core of the thermal PCB can be : 1) Aluminum (aluminum core PCB), 2) Copper (copper core PCB or a heavy copper PCB) or a mixture of special alloys, while the most common being Aluminum core PCB. The thickness of metal cores in PCB base plates is typically 30 mil - 125 mil, but thicker and thinner plates are also available. MCPCB copper foil thickness can be 1 - 10 oz. MKTPCB Aluminum PCB Capacity : MKTPCB can produce 1-Layer, 2-Layer, 4-Layer and 6-Layer Aluminum PCBs. Multilayer aluminum PCB is mainly used by high power Industrial products, like outdoor Led screens. Solder mask Color: White, Black. We can also provide Super-White color for LED PCB to improve the reflected light off of the board to increase the Lumens. -
Material : aluminium Board thickness:1.5mm Single sided pcb Non pth Pannel with 2 technical boarders of 8mm Cu thickness : outerlayer 35?innerlayer 0 Pcb size : 300mm x 220mm Surface finish:immertion gold 2 legend prints, soldermask 1 side Electrical testing required Pcb size : 300mm x 220mm
Thick Aluminium based PCB Thick Copper PCB, Aluminum PCB, Metal Based PCB, Fr4 PCB, Rigid Circuit, Halogen Free PCB, Fr4 PCBA Assembly, Arlon PCB, PTFE PCB, Fr4 + High Frequency Mixed PCB Manufacturer Board Thickness: 4.0mm PCBMAIN can OEM and wholesale thick copper PCB, aluminum PCB, Fr4 PCB, metal based PCB, Rigid Circuit, halogen free PCB, Fr4 PCBA assembly, arlon PCB, PTFE PCB, Fr4 + high frequency mixed PCB.
We just processed in a large batch of chipsets. I posted below current inventory and attached pictures of each type of chipset. Please review and let me know your interest/offer. Chipset 1 (H61) â?? 3,350 units Chipset 2 (H81) â?? 2,206 units Chipset 3 (H55) â?? 436 units Chipset 4 (B250) â?? 1,600 units Chipset 5 (SR406) â?? 345 units Thank you, Divanti Group
PCB Materials: aluminium. This pcb material is produced in china, having much competitive price and quality is as good as overseas. Layer number: 1 Board thickness: 1.6mm Surface technique: pb free hal Minimum hole size: 0.30mm Minimum line/space: 0.25mm/0.25mm Solder mask: white V-cut, routing or punching Application: led lamp Lead time: sample 4 days S. 5 m2, 13days .
1). Bergquist Thermal Clad aluminium backed, 2). LTI-04503,MP-06503,ML-11006, HT-07006 3). Ceramic dielectric material, conductivity: 1.3W/m-k, 2.2W/m-k, 4). 1.6mm thick, single sided, 1oz 5). Black solder mask/no ident 6). CNC rout outline 7). Immersion gold. Bergquist Aluminum based PCB, Bergquist T-Clad IMS PCB, LED Aluminium pcb, MCPCB Bergquist HT-04503 Bergquist MP-06503 Bergquist HT-07006 Aluminium Base PCB for LED, High thermal conductivity aluminum pcb, Bergquist PCB board,Bergquist printed circuit circuit board, IMS PCB , aluminium based copper-clad pcb board.
Alloy:1100, 1050, 1060 Temper:h18 Thickness:0.15-0.21mm Width:300-1350mm Application:printed circuit board Packing :export seaworthy wooden pallets Delivery time :30days Price terms:fob, cfr, cif Payment term:lc at sight, tt Moq:3mts Astm-b209-2010 Ams-qq-a250/x(x) En485-2008 Gb/t3198-2010
Double side pcb Pcb - d/s (double side pcb) Major material: fr-4, nelco, htg>170, high cti value, halogen free Minimum board thickness: double side: 0.2mm - 2.4mm Product finishing: Hasl Hasl (lead free) Flash gold Selective gold Immersion gold Immersion tin Immersion silver Carbon print Gold finger Entek cu106a Flux coating Peelable mask Blind/buried via Bga Design range: inner layer 0.005"/0.005" Outer layer 0.005"/0.005" Warpage tolerance 0.7 percent max Plated thru hole: min. Size: 0.15mm Double side: copper weight 6 oz Mnim. Line/space: 0.1mm Aspect ratio: 8: 1 Impedance control: (50)+/-10 percent Cirket electronics co, . Ltd is specialized in various pcb manufacturing . We focuse on multilayer fr-4 pcb and single/double side aluminium pcb . Both prototypes and mass production are welcome. Besides, our brother factories can meet customer fpc and rigid-fpc needs. Fob price: fob shenzhen, hongkong Port: shenzhen, hongkong port Payment terms: l/c, d/p, t/t, western union (negotiable) Minimum order quantity: 200 piece/pieces Delivery time: quick delivery Place of origin: china guangdong Brand name: cirket Certification: rohs, ul, iso9001:2000, iso14001, Package: inner packing : vacuum airbag Outer packing: standard carton packing.
2 layer With surface finish for gold 1.6mm board thickness.
Technical requirements: Material: FR-4 Layer: 2 layer Thickness of cooper: 2/2 Oz Thickness of board: 1.6MM Surface finish: HASL LF Min. hole size: 0.2mm Min.line width: 0.13mm Min.line space: 0.15mm. (Note: China PCB manufacturer--Hitechpcb specially produces on rigid printed circuit board; printed wiring board; mulitlayer printed circuit board; flex-rigid printed board, rigid-flex printed board; metal core printed board; heavy copper coard; power board; heavy gold board; Flexible board/Flex PCB; Bergquist Aluminum based board/Al PCB; Metal Core PCB; PCB/PWB/FPCB/FPC/MPCB/Rigid-Flex PCB).
PCB.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Layers: single and double sided Copper weight: 0.5-3oz Board thickness: 0.8-3.0mm Tracks and space standard > =0.1mm(4mil) Min hole: 0.4mm(drilled hole), 2.0mm(punched hole) Surface finish: osp, hasl(lf), enig, plate gold