UV Sensor "UV-Arc"
water proof UV sensor with G3/4" thread for pantograph arc detection
Properties of Waterproof UV Sensor UV-Arc
The UV-Arc is a waterproof sensor with a male threaded body (G3/4") to be used on trains to measure intensity and length of pantograph arcs according to EN 50317. This indicates the quality of the contact between a pantograph and the contact wire and allow a location of defects at the wire within a rail network. The UV-Arc sensor is configured for this special application. It contains a very sensitive photodiode with an additional filter to suppress solar UVB sensitivity. The time constant is adjusted to the typical arc lengths and the metal housing provides high EMC safety.
UV-Arc Waterproof UV Sensor Specifications
* Temperature Coefficient (30 to 65'C): 0.05 to 0.075%/K
* Operating Temperature: -20 to +80'C
* Storage Temperature: -40 to +80'C
* Humidity: < 80%, non condensing
* Spectral Sensitivity: UVC+
* Measuring Range: up to 400 W/cm2
* Signal Output: 0 to 5 V or 4 to 20 mA
UV Sensor "UV-Arc"
water proof UV sensor with G3/4" thread for pantograph arc detection
Properties of Waterproof UV Sensor UV-Arc
The UV-Arc is a waterproof sensor with a male threaded body (G3/4") to be used on trains to measure intensity and length of pantograph arcs according to EN 50317. This indicates the quality of the contact between a pantograph and the contact wire and allow a location of defects at the wire within a rail network. The UV-Arc sensor is configured for this special application. It contains a very sensitive photodiode with an additional fi lter to suppress solar UVB sensitivity. The time constant is adjusted to the typical arc lengths and the metal housing provides high EMC safety.
UV-Arc Waterproof UV Sensor Specifications
* Temperature Coefficient (30 to 65'C): 0.05 to 0.075%/K
* Operating Temperature: -20 to +80'C
* Storage Temperature: -40 to +80'C
* Humidity: < 80%, non condensing
* Spectral Sensitivity: UVC+
* Measuring Range: up to 400 µW/cm2
* Signal Output: 0 to 5 V or 4 to 20 mA
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
16899 Uv Arc Uv Sensor For Pantograph Arc Detection Suppliers
Short on time? Let Uv Arc Uv Sensor For Pantograph Arc Detection sellers contact you.
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.) 2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface. Good compatibility with various cables. Wide application temperature range. Excellent performance in weather resistance, waterproof sealing and anti-aging. Applications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6400 butyl tapes are waterproof and insulated tapes with strong adhesion
and adaptation to irregular surfaces. It exhibits excellent performance in
waterproof, sealing and anti-UV to antenna feeder and cable connection
box.
Main Specification
(Customized size is acceptable.)
2mm*40mm*20m * 8.5mm * 8mm * 10mm * 12mm
Main Color - Black
Technical Data
Product Series FOCUS-6400 Series
Application Communication Industry
Elongation - 400%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility Â40, no crack on surface within 24h
Tensile Strength 175KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion and adaptation to irregular surface.
Good compatibility with various cables.
Wide application temperature range.
Excellent performance in weather resistance, waterproof sealing and anti-aging.
pplications
Provide waterproof and sealing protection to communication base station and antenna feeder.
Provide waterproof and sealing protection to cable connection box
Focus-6500 butyl tapes has good performance in waterproofing and sealing, non-hardening, weather resistance, strong adhesion, adaptation and anti-aging .
Technical Data
Product Series FOCUS-6500 Series
Application Home Decoration Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 22N/cm
Tensile Strength 210KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
Smooth and Delicate.
Excellent Adaptation.
Greene nvironmental protection.
Non-toxic tasteless.
Good performance in waterproofing and sealing.
Best quality with outstanding service life.
Applications
Focus-6500 butyl tapes are widely used in bathrooms, kitchen, home decorations, office areas and other home applications, for its good
waterproof/mildew proof /airtight and environmental property.
Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight
property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.)
6mm*8m
8mm*6m
10mm*4.57m
Main Color - black
Technical Data
Product Series FOCUS-6300 Series
Application Automotive Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm
Tensile Strength 230KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to
Excellent performance in non-corrosive, weather resistance and
adaptation.
Applications
Provide waterproof
protection to car doors waterproof membrane. Provide waterproof and
sealing protection to the battery of new energy
automobile.
Other waterproof applications on cars and new energy cars
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing.
Main Specification
(Customized size is acceptable.) 3.0mm thickness
* 12mm width *15m roll length
2.5mm thickness * 8mm width * 15m roll length
2 mm thickness * 15mm width * 20m roll length
2.5 mm thickness * 8mm width * 20m roll length
Main Color
black, grey, white
Technical Data
Product Series FOCUS-6100
Application Composite Materials Industry
Elongation 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 23N/cm
Tensile Strength 220KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet.
Advantages
Strong adhesion.
Wide application temperature range.
Excellent performance in waterproofing and sealing.
Applications
* During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent
sealing property between vacuum bags and molds.
* During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds.
* As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht.
* Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 250 to 350 GSM.
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM.
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM.
Quilting -
Middle Layer - Normal wadding or FR wadding as per needs
Inner Layer - Normal lining or FR lining as per needs.
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Shell Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic, IFR, 180 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 230-300 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM.
Quilting -
Middle Layer - Normal wadding or FR wadding as per needs
Inner Layer - Normal lining or FR lining as per needs.
Size �?�¢??
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU).
Safety Performance -
General :- EN ISO 13688, EN ISO 20471, ISO 15797
Arc :- EN 14116, EN 11611, EN 11612, NFPA 2112
Fire :- EN 61482, EN 1149, NFPA 70E.
Industry - Welding, Oil & Gas, Petrochemicals, Electrical etc.
Composition -
GDI32 - Modacrylic:Cotton:P-Aramid:Antistatic IFR, 180 GSM
GDI37 - Cotton:Antistatic with FR Treatment, 240 to 350 GSM
GDI49 - Modacrylic:FR Viscose:M-Aramid:Antistatic (IFR), 240 GSM
Size -
XS to 5XL (ASIA)
34 to 60 (US)
34R to 60R (UK)
44 to 70 (EU)
Safety Performance -
General - EN ISO 13688, EN ISO 20471, ISO 15797
Arc - EN 14116, EN 11611, EN 11612, NFPA 2112
Fire - EN 61482, EN 1149, EN 2112
Adding UV Dye to automobile refrigerant systems to detect leaks has long been a trick of the trade Honeywell is now offering the same benefit with R1234yf UV This technology provides precise leak detection shortened service times accurate repair verification and increased customer satisfaction Solstice yf refrigerant with UV dye will allow service technicians to maintain these benefits when servicing vehicles that were built with R1234yf
Solstice yf for heavyduty vehicles
Due to the AIM Act in the US and FGas in the EU the allowable production and consumption of HFC quota in the US and EU will reduce again in 2024 As a result the supply and price of 134a may become more volatile With additional HFC quota reductions planned beyond 2024 134a volatility is expected to continue to increase as the US and EU essentially phase out all HFCs over the next decade In fact the US has proposed a ban of 134a in all HeavyDuty OffRoad vehicles effective 2026
Moisturizes all day long with Mixed UV Filters.
Comforts the skin with excellent lightweight texture and fast absorption but leaves a healthy glow look
And fits all skin tones with an invisible finish.
Soothing
Non-White Cast
Mixed UV Filter
16899 Uv Arc Uv Sensor For Pantograph Arc Detection Suppliers
Short on time? Let Uv Arc Uv Sensor For Pantograph Arc Detection sellers contact you.
