Lc 238 is designed specially for use in systems where the use
Of concentrated acidic or concentrated alkaline descalers are
Not recommended. This product is specially formulated for
Specific cleaning and descaling purposes for sensitive system.
Lc 238 may be re-circulated by means of a high volume pump
For the removal of scale. Lc 238 can be used safely on to
Copper & brass surfaces besides being very effective in steel
System.
This product contains organic poly acrylic & polymer
Compound.
Application
Lc 238 may be soaked overnight and re-circulated. When scale is
Present, the tubes should first scraped out to remove as much as possible
And then flushed out with a hose.
Dosage
Circulate an appropriate concentrated solution based on the scale and
Corrosion. For storing / stand by system use lc 253 or lc 252. For more
Detail and specific method and concentration, please consult lifechem
Technical services.
Handling & precaution
This product ph is between 4.0 – 9.0 and should be handled with care to
Prevent personal injury. Protective clothing, gloves and eye protection
Should be worn. In case of skin contact, immediately flush thoroughly with
Plenty of clean water. In case of eye contact, flush with copious amounts
Of water for 15 minutes and consult a physician. Refer to material safety
Data sheet for more specific procedures and directions.
Packaging
Available in pail of 20 lt.. Can also be custom packaged
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
2-head packaging machine (also can 4-18head according different capacity choice)
Packaging speed 15bags/min
Bag length 90-320mm
Bag width 80-210mm
Overall weight 400kg
Power 1.8kw/220v
Packaging capacity 20-1000ml
Outer packaging size 820 x1220 x 2500mm
Packaging form Back sealing
This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc.
Performance characteristics:
1. High precision digital sensors enable precise measurement to be achieved instantly.
2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use.
3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging.
4. Four scales work alternately, with fast packaging speed.
5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean.
Host configuration:
This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
Multifunctional water-based cleaner specially formulated to remove stubborn stains like oil, grease, and dust on machines, metal, plastic, glass, floors, and various other surfaces. It remains safe when it comes into contact with skin.
The perfect solution to maintain cleanliness and performance of parts in your company, R219 is odorless and contains a corrosion inhibitor that effectively prevents rust, ensuring equipment remains protected and durable. Clean thoroughly and quickly without the risk of damage!
Highly recommended for use :
Automotive, Manufacturing, Oil and Gas, Paper Mills, Mining, Food Processing Plants, Heavy Equipment, Construction, Marine, Utilities and Power Generation, Steel Fabrication Industry, etc.
Introduction to the product
CW-TAB Corrosion and Scale Inhibitor Tablets are solid tablets manufactured by isolating, wrapping, release-controlling water treatment chemicals. and pressing it into solid tablets with the high-pressure production process and CRT controlled release technology. Its formulation set contains ferrous metal corrosion inhibitor, non-ferrous metal corrosion inhibitor, scale inhibitor, dispersant, deposition inhibitors, etc. Different from liquid water treatment chemicals the content of active matter is only 20%-30%, CW-TAB contains over 95% of active matters. When added into the system, each 100g can release active ingredients continuously for 3 to 4 weeks, to effectively control the corrosion and scaling of the cooling water system.
Method of use
The recommended dosing concentration of CW-TAB is 20-25ppm. You may simply hang the tablets in the water distribution pan or water collection pan of the cooling tower and other places where the water will go through. The tablets will dissolve and release active ingredients slowly for up to three to four weeks, and then be replaced after complete dissolution. Every 2 tablets of CW-TAB 200g can help with the daily maintenance of a cooling water system 0~25RT for three to four weeks, and the monthly dosage for a cooling water system of 100 RT is only 2kg. For larger systems 300RT or more, a special Leap tablet dosing device can be used to achieve the automatic dosing of tablets.
PE coil pipes and tubes for water and wire cable conduit PL231
The PE coil pipes and tubes can be used:
water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm
We use new 100% pure raw PE material
WHY NEW MATERIAL HDPE PIPES?
1. Health performance
PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.
2. Corrosion resistance
It can resist various chemical media erosion, with no electrochemical corrosion.
3. Service life
Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.
4. Impact resistance
PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.
5. Connection performance
The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.
6. Construction performance
It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.
WPC Toilet Cleaner is a toilet cleaning product that functions to remove scale and dirt stuck to the surface and kill germs.
Available in 4 variants:
- Original
- Floral
- Fresh Breeze
- Flower Garden
Corrosion and scale inhibitor is an important water treatment agent, which is mainly used in circulating cooling water system, such as power plants, chemical plants, central air conditioning, etc. to prevent scale formation and metal corrosion. These products are usually compounded from a variety of ingredients, including chelating agents, dispersants, corrosion inhibitors, etc., which work together to achieve the effect of scale and corrosion inhibition.
What are Corrosion Inhibitors and Scale Inhibitors?
Corrosion and scale inhibitors are specially tailored chemicals that, when added at low concentrations in water, delay or prevent the formation of scale, which would normally form in water. Corrosion and scale inhibitors are similar to preventing scaling in washing machines, and similar chemicals are used. Ultimately, inhibition can be achieved by adding substances that react with the potential scaling material to achieve a thermodynamically stable region, or by adding substances that inhibit crystal growth. The use of these chemicals is therefore attractive because very low doses (a few ppm) are sufficient to prevent prolonged fouling of surfaces or equipment treatments. The exact mechanism of scale inhibitors is not fully understood.
Water treatment chemicals refer to a diverse group of substances used to improve the quality of water for various purposes. These chemicals encompass a wide range of applications, from disinfection with chlorine or ozone to remove harmful microorganisms, to coagulants and flocculants like alum and polymer additives that aid in the removal of suspended particles in wastewater treatment. pH-adjusting chemicals like lime and sodium hydroxide help balance the acidity or alkalinity of water, while corrosion inhibitors protect pipes and equipment. Additionally, scale inhibitors, activated carbon, and ion exchange resins are used to remove impurities and pollutants. Water treatment chemicals play a vital role in ensuring safe, clean, and potable water for consumption, industrial processes, and environmental protection.
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes
Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture.
Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan.
We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few.
Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance.
A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium
(typically there will be 2-5% Na2O).
It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware.
Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity.
White soda feldspar has high sodium content. It is a common raw ingredient used in glass, ceramics, and to some extent in paint, plastics, and rubber as a filler and extender. The alumina from feldspar improves the hardness, durability, and chemical corrosion resistance of glass. Feldspar's alkalis (calcium oxide, potassium oxide, and sodium oxide) operate as a flux in ceramics, reducing the melting temperature of a mixture.
We at Aryan Tiles have an enormous selection of both white potash and white soda feldspar minerals. We have a deep understanding of how our Feldspar minerals can be used in manufacturing our customersâ?? end-products and suit their particular industryâ??s needs. And, thus we have been able to supply to various industries and optimize our customersâ?? product manufacturing with our premium quality mineral
Wollastonite
Wollastonite is one of the most versatile minerals. It is a naturally found mineral that is a mixture of calcium, silicon and oxygen. However, it is majorly found in the regions of Rajasthan, Gujarat and some parts of Tamil Nadu in India
The physical properties of Wollastonite include an eclectic needle looking structure which is high in brightness and has superior tones of white. It also has low moisture, oil-absorbing and high thermal stability with less solubility in water. It is low in volatility and has a high melting temperature. Wollastonite has medium hardness with rank of 4.5 on Mohâ??s scale.
All of these properties make it an excellent and versatile mineral to be used in industries like plastics, paints, ceramics, construction and adhesives to mention a few.
We have majorly focused our supply of Wollastonite mineral on its high-end applications in the ceramics, paints and plastics industries.
Within the sphere of the plastics industry, it is a brilliant and less-expensive mineral substitute for fiberglass, carbon fiber and synthetic minerals. It is very much popular in automobile industries, as it can enhance the strength, dimensional stability, and influence resistance of car parts, aiding the manufacturers with lighter parts.
Wollastonite is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.
It's often used in electronic equipment like connectors and computer housings because of its great insulating and fire-resistant qualities.
Wollastonite mineral is customized to meet the needs of our clients' industries. Our wollastonite is anti-corrosion mineral that is ideal for paints and coatings sector. Wollastonite can improve the fire strength of ceramic tiles and sanitary ware, as well as reduce cracking and glazing faults, for ceramic manufacturers.
Our Wollastonite is an excellent reinforcing filler for cement boards and fire-insulating boards in the building industry.
Aryan Tiles is confident in the quality of its Wollastonite minerals. Wollastonite has proven to be the most adaptable material used in various key sectors, and the market for it is constantly expanding.
The feldspar mineral is by far the most plentiful mineral found beneath the earth. It is used in most of the daily usage products. Feldspars are classified into three types: feldspar, pegmatite, and feldspathic sand, and their alumina and alkali content make them ideal for industrial purposes
Feldspars and pegmatites are useful functional fillers in the paint and glue industries, as well as fluxing agents in ceramics and glass manufacture.
Feldsparâ??s physical properties include high potassium and low iron content. It has pH stability and has consistent hardness with a rating of 6 to 6.5 on the Mohs scale. It is majorly found and mined in the state of Rajasthan.
We at Aryan tiles develop Feldspar minerals with the specialized qualities to cater to the specific industries such as ceramics, glass, and paints to mention a few.
Feldspar is an excellent source of alumina leading to improvement in the end-product hardness, durability, and chemical corrosion resistance.
A feldspar is typically referred to as 'potash' if there is significantly more potassium than sodium
(typically there will be 2-5% Na2O).
It is also used as fluxing agent for flat and container glass, as well as insulation wools and also in the ceramic industry. Our Feldspar mineral is known for its low quantities of colored oxides, making them ideal for manufacturing white tiles and sanitary ware.
Further, Feldspar is also used in paints industry as it has great dispersibility, chemical inertness, pH stability, abrasion resistance and low viscosity.
The white potash is a distinctive mineral with more potassium content. Our feldspar mineral is of high purity grade, free from impurities and naturally sourced. Our skilled personnel use technology advanced machines to extract the supplied feldspar under their close supervision. This feldspar is utilized in variety of industries, including building, mining, chemical, and others. It is also ideal for making porcelain and earthenware.
Calcite is the most widely available mineral found within our planetâ??s crust. It is the main component found in limestone and marble. It is also used as a building material, as an abrasive, as a construction aggregate and as a pigment. It is also used in agricultural soil treatment.
We source and manufacture our calcite mineral majorly from the regions of Rajasthan as it is the biggest source, followed by Andhra Pradesh and Madhya Pradesh.
The physical properties of calcite are softness with a value of 3 on the Mohs scale, high lustre, lower specific gravity and rhombohedral cleavage. Calcite differs from dolomite as its fragments effervesce readily in cold hydrochloric acid, whereas dolomite fragments do not.
Calcite is one of the most popular and functional minerals due to its ease in availability and strong functional properties. It is widely used in several industries such as paper, paint, ceramic, automobile, plastics, agriculture, glass, coal, construction, cosmetics and pharmaceuticals to name a few.
Calcite is a carbonate mineral and the most stable polymorph of calcium carbonate (CaCO3). It is a very common mineral, particularly as a component of limestone.
We use calcite as filler and coating material for quality paper packaging in the paper industry. It makes the paper surface hardened and smoothed. It also aids in the fast drying of the final paper product as it absorbs the oil rapidly. Further, in the paint and coating sector, our calcite mineral is used to replace pigment and protect steel from corrosion. It also provides improved water and chemical resistance.
In the ceramic industry, calcite increases the strength of ceramic products. It is added to the tile slurry during the tile manufacturing process to remove the negative effects of SiO2 in the medium. Furthermore, in the construction sector, calcite is used in the manufacturing of cement and concrete as limestone and marble.
In the coal mining sector, calcite is used to keep coal dust from exploding and spreading into flames. It also plays a significant role in hard water treatment. Calcite eliminates any hardness present in the water, cleans the water and controls the color of the water. In the leather industry, it is used in the pre-process of leather by aiding in removing the animal hair.
Our CMC products are suited for a wide range of applications since they are derivatives of a naturally occurring raw material and have high degree of purity. They are manufactured with cutting-edge technology and are subjected to rigorous quality control methods.
Due to its vast use in a variety of sectors, calcite is unquestionably the most popular and usable mineral. We manufacture calcite minerals using innovative technology and highly skilled manpower to ensure that all of our customers' end-product requirements get satisfied.
Our export-quality mortise handles are crafted from premium materials, ensuring durability, corrosion resistance, and a flawless finish, ideal for both residential and commercial spaces. They meet international standards, making them highly sought after in global markets. These handles feature smooth mechanisms, providing a seamless user experience. We offer a wide range of styles and finishes, from sleek modern designs to classic traditional options, all fully customizable to meet specific requirements. Whether you need custom sizes, finishes, or logos, we can tailor each handle to your exact specifications, making them perfect for large-scale projects and discerning clients worldwide.
At Prefine Chemicals, we distribute top-tier Hydrochloric Acid and offer expert guidance to help you achieve optimal results. Our
commitment to quality ensures you receive a reliable product you can depend on.
EXCLUSIVE FEATURES
Colourless and Corrosive liquid
Stable even at high temperature
Low Iron content
APPLICATIONS
Major Consuming Industries :
Steel pickling and scale removal
Water treatment
Ore refining
Food processing
Manufacture of Chlorine Dioxide
Activation of Petroleum wells
Catalyst in Organic process
Removal of heavy metal from Carbon Black and Activated
Carbon
Leaching Alumina from Crystalline Zeolities
Hydrolyzing agent
PACKAGING
MS Rubber lined Road Tankers
35 kg Carboys for Export
265 kg HM - HDPE Barrels for Export
MOQ 1x20'FCL
SPECIFICATIONS
Sr. No Characteristic Specifications
1 Hydrochloric Acid (as HCl) 30.00 % min
2. Iron (as Fe ) 1.00 max ppm
3. Free Chlorine & Bromine 0.0020 % max
Traditional antiscalant: It cannot be decomposed into non-toxic substances under the action of microorganisms and fungi, and long-term accumulation will cause potential hazards. Alternatives: Phosphate-free, biodegradable green corrosion and scale inhibitor polyaspartic acid.
Polyaspartic acid: the best scale inhibition performance, and has very good biocompatibility and biodegradability, and has a certain corrosion inhibition effect.
BHMTPMPA is a high-efficient chelating scale inhibitor, it has good effect to carbonate and sulfate scale.
BHMTPMPA has good water-soluble properties and heat tolerance.
BHMTPMPA has high calcium ion tolerance in a wide pH ranges and temperature as high as 120C.
BHMTPMPA can be used as scale and corrosion inhibitor for oilfield water, industrial circulating cool water and boiler.
Diethylenetriamine pentamethylene phosphonate sodium is an organophosphorus series scale inhibitor. Its molecular formula is C9H28O15N3P5, and its relative molecular weight is 573.2. Diethylenetriamine pentamethylene phosphonate sodium is non-toxic, miscible with water, has better scale inhibition and corrosion inhibition effect, and has good temperature resistance, which can inhibit the formation of carbonate, sulfate and phosphate scale. Especially when the pH value is 10-11, calcium carbonate still has a good scale inhibition performance, and the scale inhibition effect at this time is 2 to 3 times higher than that of hydroxy-ethylenediphosphonic acid and amino trimethylenephosphonic acid. Another outstanding feature is that the combination with manganese ions has a good corrosion inhibition ability on carbon steel and copper alloys.
