SUPCON LN81 Series Single Seat Globe Pneumatic Control Valve
Pneumatic Pressure Control Valve
Pneumatic pressure control valve is capable of regulating the system pressure to adjust the force on the hydraulic piston rod or the torque on the hydraulic motor shaft. Pressure relief valves are used to set the maximum pressure in the circuit and prevent it from being overloaded. Pneumatic pressure control valve permanently maintain the output pressure at the set value while preventing overloading of the equipment. Unloading valves are designed for economic pressure control in accumulator operating circuits and are used as a power source for emergency control.
Globe Control Valves use linear motion to move the shutoff member in and out of the seat surface. Their bodies feature a spherical cavity around the port area and are designed to regulate process flow when used in conjunction with an actuator assembly. Many single-seat bodies use a cage, three-way or fixed construction to hold the seat ring in place, provide spool guidance, and provide a means of establishing specific valve flow characteristics. Caged or fixed single-seat bodies can also be easily modified by replacing the internals to change the flow characteristics or to provide reduced capacity flow, noise attenuation, or to reduce or eliminate cavitation.
The LN8 series top-guided single-seat control valve is a top-guided, plunger-type single-seat control valve. It was certified by TÃ??V ISO15848 in 2019. It has the characteristics of high control accuracy, good sealing performance, simple structure and high versatility. Suitable for fluid control in globe control valve working conditions requiring high control accuracy. Bellows seal type can be used. Thousands of applications in the fine chemical, petrochemical, pharmaceutical and other industries.
Feature:
Suitable for clear fluid lines such as Water, Liquid, Gas, Steam, etc.
This valve is used in systems that require precise flow control and where leakage and air-tightness are critical.
Application:
It is essential for the flow line of each industry. Mainly used in plant automation facilities due to excellent precision control such as flow rate, pressure, temperature, etc.
Characteristics:
1. For excellent wear and tear resistance, Stellite welding is used by default on core
components such as plug and seat ring.
2. It is possible to achieve excellent durability of the unfavorable fluid condition and high
temperature through heat-treatment on parts of the stem and trim
3. The selection of accurate trim and material through extensive testing and rich
experience in technical solution
4. In case of a product related problem, we have technical personnel who can
immediately assess the situation and resolve the issue
A Globe Control Valve is a type of linear motion valve primarily used to regulate fluid flow in pipelines. It consists of a movable disk (or plug) and a stationary ring seat in a globe-shaped body. By raising or lowering the plug, the valve controls the flow rate. Globe valves are versatile and suitable for various applications, including throttling and isolation services in industries such as oil and gas, chemical processing, and power generation. Their design allows for precise flow control, making them essential components in process control systems where accurate regulation of flow, pressure, or temperature is required. You'll be interested in China Manufacturers.
Enhance your industrial process with our Multi-Turn Electric Actuator Globe Control Valves, meticulously fabricated for superior control. Featuring a robust Cast Iron Body & Stem, these valves are available in sizes from 2 to 40 inches (DN50-DN1000) to accommodate a wide range of flow requirements. Designed to meet Class 150 LB and PN20 pressure standards, they offer versatile Wafer and Flanged Connections for easy integration into various systems.
The LN8 series sleeve-guided control valve is a sleeve-guided, pressure-balanced single-seat control valve. It is TV ISO 15848 certified in 2019. It has a split sleeve construction and a high performance balanced seal ring seal. Suitable for fluid control in ambient and priming conditions. Bellows seal type is available. Thousands of applications in the fine chemical, petrochemical, pharmaceutical and other industries.
Performance advantages
Modular design concept, combining the and of high-precision control and the school of modular concept.
The cage valve inner cavity of the valve body is S-shaped distribution, smooth and without dead ends; there are guide wings inside the valve body, which can reduce the mutual force of the medium inside the valve body and reduce the occurrence of cavitation.
The use of sleeve guidance, large guide diameter, smooth guidance, with good dynamic stability.
The cage valve seat adopts floating design, while the sealing surface adopts tapered form to ensure good alignment of the sealing sub.
Sleeve window control flow characteristics, flow characteristics control accurately.
The structure of the inner part is balanced, allowing a large differential pressure, small operating force and large flow capacity.
Equipercent, linear and quick-open flow characteristics are available.
Good use in the temperature range of -80 to 593
And pipeline connection with RF, RJ, FM and other flange type and SW, BW welding type.
The flange distance conforms to GB/T 17213.3-2005 / IEC 60534-3-1:2000; or ISA S75.03-1992 standard.
Cage Valve Part
1. Valve Trims
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
2. Valve body
The body of LN8 series control valves consists of two passages from upper and lower, forming a shape like letter S. The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
LN81 Series Single Seat Globe Control Valve
3. Actuator
The standard mate of LN8 series is AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of actuator has a long life cycle with more than 1 million times.
LN85Â series are LN8 series SUPCON pressure balance control valves products, one of the three basic has separable sleeve, large guide structure, adopt the molding spring, energy storage pressure balance ring. Has a good dynamic stability, high control precision, allow the pressure difference is big, the operating force is small, large flow capacity, suitable for a wider temperature range of conditions, large pressure difference, under the action of alternating stress control.
Cage Guided Globe Control Valve Description
Long life
1. Valve Trims
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
2. Cage guided globe valve body
The body of LN8 series control valves consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
LN81W / 82 series bellows single-seat control valve, based on LN81/82 series valve single-seat non pressure balance structure on the basis of increase the bellows seal structure, compression elastic stainless steel bellows in bearing parts connected to the valve stem in together, and packing of double seal, eliminate medium leakage hidden trouble. Suitable for differential pressure is highly toxic, flammable, explosive, volatile and the adjustment of the rare and precious metal medium.
bellows single-seat control valve TECHNICAL PARAMETERS
Nominal Size DN15 ~ DN300
Pressure Rating PN16/25/40/63/100;CL150(PN20)/300(PN50)/600(PN110)
Operateing Temperature -46â??~ 350â??
Characteristics Equal percentage, linear, quickly open
Rangeability 30:1ã??50:1ã?? 100:1
Seat Leakage Class ANSI B16.104: IVã??Vã??VI
Body Material WCB/WCC/LCB/LCC;WC6/WC9;CF8/CF8M;4A/5A etc.
Trim Material 630/316/316+ST/316nitriding/316+Ni60/316+WC etc.
Seal Material PTFE+ graphite v-shaped packing, flexible graphite ring packing, graphite +PTFE braided packing etc.
Single seated globe valve manufacturer:Zhejiang SUPCON Fluid Technology Co., Ltd.
Regulating valve Long life
1. Valve Trims
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
2. Valve body
The body of LN8 series Single Seat Regulating Valve consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
We are Single Seat Globe Control Valve Manufacturer
3. Actuator
The standard mate of Globe valve is AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of actuator has a long life cycle with more than 1 million times.
LN81 series are single-seat LN8 series pressure imbalance structure products, one of two basic guide plunger valve core, the floating sleeve compression type, from the seat structure, modular design, the flow capacity is big, high controlling precision, adjustable range, can achieve minimal flow control, structure is simple, reliable, good seal performance, the scene is easy to maintain. Is suitable for the pressure difference is not big, the seat leakage and high control precision.
High Accuracy Globe Control Valve Supplier
Product Description
Long life
1. Valve Trims
According to the needs of the working conditions, different materials and surface hardening treatment can easily be chosen to meet the requirements of each function module of trim to improve its performance of the corrosion, cavitation and erosion resistant, lengthen service life.
2. Single seated globe valve body
The body of LN8 series single seat regulating valve consists of two passages from upper and lower, forming a shape like letter "S". The design of an elliptical section reduces the flow resistance and turbulent flow to keep the flow fluent. The flap in the middle of upper passage can reduce the eddy flow and increase the flow capacity.
SUPCON Single Seat Globe Control Valve China:Zhejiang SUPCON Fluid Technology Co,. Ltd
3. Actuator
The standard mate of LN8 series is AM8 Multi-spring pneumatic diaphragm actuator, which can be used in many conditions with the features of strong output force, high reliability, long lifespan and extensive application. The output force changes with the number of springs. The high stress resistant diaphragm, bearing maximum pressure of 0.5 MPa air supply, gives control valve a reliable shutoff. This type of Single seated valve has a long life cycle with more than 1 million times
High Precision
LN8 series SUPCON Globe valve are designed strictly on the basis of the IEC standard. They are the latest self-innovated modularized straight stroke control valve of SUPCON. We divide the trims into three modules, namely guide, control and seal module. We provide the best solution according to the function of each module and make action, control and seal more reliable.
Each index, linear, hysteresis, dead zone and leakage, for example, is full compliance with national standards. SUPCON Globe Control Valve for sale
Globe Valves For Flow Control
Globe valves are used to regulate flow in pipelines and consist of a removable disc (also known as a plug) element and a fixed ring seat usually located in a spherical valve body. The inlet and outlet of the globe valve body are separated by an internal baffle. The baffle has an opening that forms a seat into which the removable disc/plug can be screwed to close (or shut off) the valve.
Common Applications
Globe valves are available in a variety of sizes (NPS 1/2 through 36) to provide users with high performance and reliability. They can help solve a variety of application needs from large to small, hot to cold, and general to severe.
Bonnets are available in a variety of styles to accommodate different application temperatures. These primarily include standard bonnets and optional extension bonnets that can be used to protect the packing when the valve is used in extremely hot or cold applications.
Special packing configurations are also available for applications where a packing system is required to keep fugitive emission concentrations below ambient standards.
Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)
