Find Verified Dispensing Systems Suppliers, Manufacturers and Wholesalers

Construction waste & demolition sorting system
Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on.

Applications of Construction waste & demolition sorting system:
Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic.

Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc.
Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on.
Capacity: 100 tons per ho ur to 800 tons per hour.














Machine pictures and processing chart of Construction waste & demolition sorting system:
Process Description of Construction waste & demolition sorting system:
The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop.


WCW-800 List of Construction waste & demolition sorting system:
Number Model Name Quantity
1 ZSL-80 Drying to mud screening system 1
2 FXJ-800 Light material selection system 1
3 GTS-800 Roller sieve 1
4 PP1315 Impact Crusher 4
5 2 # dust removal system 1
6 1 # dust removal system 1
7 RCVD-15 Separator 2
8 PE1215 Jaw Crusher 1
9 ZSW1560 Vibration feeder 1
10 3YK3073 Circular vibrating screen 2

Construction waste & demolition sorting system
Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on.

Applications of Construction waste & demolition sorting system:
Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic.

Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc.
Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on.
Capacity: 100 tons per ho ur to 800 tons per hour.

Machine pictures and processing chart of Construction waste & demolition sorting system:
Process Description of Construction waste & demolition sorting system:
The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop.


WCW-800 List of Construction waste & demolition sorting system:
Number Model Name Quantity
1 ZSL-80 Drying to mud screening system 1
2 FXJ-800 Light material selection system 1
3 GTS-800 Roller sieve 1
4 PP1315 Impact Crusher 4
5 2 # dust removal system 1
6 1 # dust removal system 1
7 RCVD-15 Separator 2
8 PE1215 Jaw Crusher 1
9 ZSW1560 Vibration feeder 1
10 3YK3073 Circular vibrating screen 2

Construction waste & demolition sorting system
Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on.

Applications of Construction waste & demolition sorting system:
Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic.

Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc.
Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on.
Capacity: 100 tons per ho ur to 800 tons per hour.


Machine pictures and processing chart of Construction waste & demolition sorting system:
Process Description of Construction waste & demolition sorting system:
The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop.


WCW-800 List of Construction waste & demolition sorting system:
Number Model Name Quantity
1 ZSL-80 Drying to mud screening system 1
2 FXJ-800 Light material selection system 1
3 GTS-800 Roller sieve 1
4 PP1315 Impact Crusher 4
5 2 # dust removal system 1
6 1 # dust removal system 1
7 RCVD-15 Separator 2
8 PE1215 Jaw Crusher 1
9 ZSW1560 Vibration feeder 1
10 3YK3073 Circular vibrating screen 2

R-steel, offers a comprehensive range of high quality lifting systems designed for safe lifting and transportation of various types of precast elements. Your selection may be based upon technical or economic requirement or due to already owned/available lifting equipment.

R-steel, threaded lifting systems system consists of threaded anchors their lifting devices and other accessories.

* salient features

- load capacities ranging from 0.5 to 12.5 tons.
- used for lifting all kind of precast elements.
- used for lifting angle from 0 to 90 degrees.
- easy to install and can also be recessed if required.
- ce marking.

* products:

- r-lifting anchor - are threaded socket with headed stud for anchorage.

- rls crosshole anchors - are threaded socket with hole for ribbed steel bar for anchorage.

- rpas plate anchor - are steel tube with inner thread welded to a flat steel plate for anchorage.

- rta, rwtl and rwts anchors - are threaded socket with straight/ wavy ribbed bar for anchorage.

- wire loop lifting device - used for lifting angle between 0, , and 45, , .

- wire loop lifting device equipped with pressure plate - used for lifting angle between 0, , and 90.

- full metallic lifting device equipped with pressure plate for lifting angle between 0, , and 90.

- nailing plates, socket magnets and plastic caps are also available.

- custom made solutions are also available

Construction waste & demolition sorting system
Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on.

Applications of Construction waste & demolition sorting system:
Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic.

Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc.
Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on.
Capacity: 100 tons per ho ur to 800 tons per hour.














Machine pictures and processing chart of Construction waste & demolition sorting system:
Process Description of Construction waste & demolition sorting system:
The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop.


WCW-800 List of Construction waste & demolition sorting system:
Number Model Name Quantity
1 ZSL-80 Drying to mud screening system 1
2 FXJ-800 Light material selection system 1
3 GTS-800 Roller sieve 1
4 PP1315 Impact Crusher 4
5 2 # dust removal system 1
6 1 # dust removal system 1
7 RCVD-15 Separator 2
8 PE1215 Jaw Crusher 1
9 ZSW1560 Vibration feeder 1
10 3YK3073 Circular vibrating screen 2

Specification: 1) Solar panel 480 Watts (Mono / Poly) + the bracket 2) Battery: 12V/ 200 AH x 2 3) Inverter 2000W, 12V 110V/220V 4) Controller 12V / 40A 5) Connector 10 pcs DC, and 5 AC connector. 6) LCD display Using hours (examples): - 8 pcs 3W lights: 10 hours - 2 pcs 40W fan: 7 hours - 1pcs 65W color TV: 12 hours - 3 Mobiles chargers: 12 hours - 1 Washing machine 300W: 1 hour - 1 Water pump 200W: 2 hours - work 2 days in cloudy weather Macsun SOLAR ENERGY is able to provide more designs and varieties of similar products. Macsun is also capable of designing and producing products according to your specific need. Please contact our sales team for more info.

Construction waste & demolition sorting system
Construction waste & demolition sorting system convenient and quick to achieve the construction waste disposal. After the screening of the construction waste through a specific iron removal equipment to remove the iron material contained in the coarse and medium crushing, fine crushing equipment and processing, processed into a certain size of the recycled aggregate, and finally applied to the road stone Burning brick, cement blends and so on.

Applications of Construction waste & demolition sorting system:
Crushing and screening for concrete fragments, asphalt pieces, bricks, stones, wood, plastic, gypsum and mortar, steel and nonmetallic.

Input products: the mixture of construction waste,which is composed of road concrete blocks, asphalt concrete blocks, old building blocks, building site waste, etc.
Output products: Iron, steel, impurities, plastic and different sizes of stones and bricks. All sieving materials are finally used for roadbed stone, unburned bricks, cement admixtures and so on.
Capacity: 100 tons per ho ur to 800 tons per hour.














Machine pictures and processing chart of Construction waste & demolition sorting system:
Process Description of Construction waste & demolition sorting system:
The raw material of the construction waste is crushed through the feeder into the crusher, and the material after the crushing is sent by the belt (the iron is transported at the same time as the belt conveyor). The sieving station is sieved through the screening station. Four materials are 0-5mm, 5-10mm, 10-15mm,> 15mm(According to customer needs can change),Which 10-15mm, >15mm material in the material before the light material handling,> 31.5mm of the material from the new break into the closed loop.


WCW-800 List of Construction waste & demolition sorting system:
Number Model Name Quantity
1 ZSL-80 Drying to mud screening system 1
2 FXJ-800 Light material selection system 1
3 GTS-800 Roller sieve 1
4 PP1315 Impact Crusher 4
5 2 # dust removal system 1
6 1 # dust removal system 1
7 RCVD-15 Separator 2
8 PE1215 Jaw Crusher 1
9 ZSW1560 Vibration feeder 1
10 3YK3073 Circular vibrating screen 2

Product Description: 

Fixed belt conbeyor is a general-purpose using catton canvas, nylon, polyester canvas and steel cord conveyor belt components for drag cited continous convery equipment, canbewidely used in electric power, cocal, mining, iron and steel, buiding materials, chemicals, chemicals, tobacco, environmental protection, food, lightindustry, oil and many other industries. Transport variouos bluk, block or integer goods with loosedensity 500-2500kb/m3. With the feature of great traffic and climbing ability, and Small noise, easy maintenance, good inter change ability of wearing parts etc, this kind of conveyor is good for the transport system automation control. And the working environment temperature is lower than 40° C.

Belt Conveyors is widely used to transfer granular materials or packaged stuff in many industries, such as mining, metallurgical and coal etc. As per process requirement, one single belt or multiples belts can be assembled flexibly with other transferring equipments.

It should be operated under the condition with temperature range from -10 ° C. To +40 ° C. The temperature of transferred materials should be lower than +60 ° C. We also can offer belt conveyors that stand 400° C temperature.

Belt Conveyors' features:

1. Belt conveyors  is widely used for transporting material in mining, gravel field, metallurgy, building materials, chemical industry, mineral processing, coal mining and other industries.

2. Belt conveyors  is suitable for conveying material whose bulk density is less than 1.67t / cubic meter, and powder, granular, small block of low-abrasive materials that is easy to dig and bags of materials, such as coal, gravel, sand, cement, fertilizer, and grain. The sent material temperature is less than 60 °C. The form of their assembly and the length can be determined according to user' requirements.

3. Belt conveyors is widely used in underground tunnel in the mine, mine ground transportation systems, open pit mining, ore dressing plant.

4. Technical parameters of Stable performance mining rubber/PVC belt conveyor.

The vlf waste lubricating oil purification system provides proprietors, operators as well as crews having a simple, economical and effective method for sustaining lo high quality, meeting industrial lube essential oil cleanliness specifications.

Benefits:
The actual vlf lubricating oil purification system is really a reputed remedy for keeping lo top quality. The cleaner is set up off-line, much like for example the centrifuge, other than all facets of installing, working and preserving are much more standard. The lubricating oil purifier can be attached to both 4- and two stroke motors. Our trustworthiness and traditions goes back a lot more than 6 years, but the theory of procedure remains exactly the same, except the actual fitted pump motor now offers clean necessary oil 24/7/365. In addition, with the brand new line-up and also selection of inserts we can cope with higher moves, better sanitation, with reduced consumption of filtration system inserts and may therefore become fitted upon bigger machines than before.

Whether or not for re-fit or new building, the vlf lubricating oil purification system will have gained itself inside the first yr of operations, compared to some other means of cleansing the lubrication oil.

In case installed on new buildings, the cost savings on associated installation expenses compared to additional means of cleanup the lubricant oil is actually substantial. The particular vlf lubricating oil purification system will be uncomplicated to keep, so boat crew is not going to benefit from functioning the unit with little maintenance, additionally the ship owner will certainly experience decreased operational fees for retaining lube olive oil clean along with dry.

The 1 Barrel (1 BBL) Brewing System is ideal for small breweries, pilot brewing and craft brewing enthusiasts. Capable of producing approximately 31 gallons (~117 liters) of beer per batch, it combines compact design and efficient performance for customers looking to enter the brewing industry or expand their existing business at a lower cost.
As a specialized brewing equipment manufacturer, YME is proud to introduce the 1 Barrel (1 BBL) Brewing System, designed to meet the needs of small breweries, experimental brewing and craft brewing enthusiasts. This system combines high quality components and flexible configurations to provide the ideal solution for your brewing business.

Why choose our 1-barrel brewing system?
Affordable for startups: with a lower initial investment than larger systems, the 1-barrel brewing system is ideal for startup brewers looking to test the market.
Space-saving and flexible layout: The compact design makes it suitable for space-constrained locations such as garages, small breweries or test labs without the need for extensive remodeling.
Convenient for experimentation and small batch production: For brewers seeking innovation, the 1-barrel system allows for frequent testing of new recipes, reducing costs and waste.
Easy to Operate and Maintain: Smaller systems are easier to manage and simpler to clean and maintain, making them suitable for individual brewers or small teams.

1. System Introduction
This system uses WIFI + 4G telephone network dual network transmission. When an alarm occurs, the host pushes the alarm information to the user's mobile phone APP, and can also send text messages and make calls to the mobile phone. The dual network is safe and reliable. The user can actively control the host remotely through the APP.
1.1 Functional Features:
(1) APP supports Apple and Android systems.
(2) Bluetooth network configuration, faster and more stable!
(3) There is no limit to the number of alarm hosts that can be bound to each smartphone; each user of the alarm host can log in through administrator or general member mode, of which the administrator is limited to one person and the number of general members is unlimited.
(4) Can set 5 groups of SMS alarm numbers and 5 groups of phone alarm numbers.
(5) Supports 99 wireless defense zones, 30 fire defense zones, 8 emergency call defense zones, 8 medical rescue defense zones, 4 water leakage defense zones, and can be equipped with 20 remote controllers or access control keypads (the remote controller can also be used for emergency alarm); 4 wireless sirens can be configured.
(6) Scan the QR code to add wireless accessories to the host, accurate, convenient and fast.
(7) The default setting includes seven languages and voice switching (Chinese, English, Russian, Spanish, French, German, Italian).
(8) Two-way intercom function;
(9) Timed arming, timed disarming and timed stay function (each timer can be set for three groups of time);
(10) WIFI failure and telephone network failure prompt function;
(11) Door and window open reminder function;
(12) Detector low battery prompt function, detector offline prompt function
(13) Supports delayed alarm function, delayed arming and delayed disarming function (0-99 seconds optional);
(14) When the host alarms, the srien sounding time can be selected (0-254 seconds or always sounding);
(15) In addition to the APP, you can also remotely control the arming and disarming of the host by SMS or dial buttons during a phone call;
(16) The host has the function of staying on defense (only valid for intrusion defense zones 1-99);
(17) Can record 10 seconds of alarm voice;
(18) External power failure/recovery alarm function (optional to turn on or off);
(19) Remote arm/disarm siren sound prompt function (optional to turn on or off);
(20) Remote controller arm/disarm SMS reminder function (optional to turn on or off);
(21) Door and window opening/closing reminder function in disarmed state (optional to turn on or off).

The product is designed to solve the power consumption problem of large-scale load appliances for families or offices with large power consumption, and to supply energy for various household office appliances, including air conditioners, electric fans, refrigerators, induction cookers, rice cookers, hot kettles, desktop computers, printers and routers.

Size/Weight
Installationï¼?442*132*273mm
Battery sizeï¼?442*132*671mm
N.W:42.5kg G.W:45.5kg
Monitoring method :WiFi/ 4G
Solar Size/Weight
An actual requirements configuration
Inverter Efficiency:> 99.5%
Li-ion 5KWH
Cooling Mode Air-blast cooling

1.Model: Train
2.Standard: W 0000 X L 0000 x H 0000
3.Configuration: Man: urinal 2ea, stool 1ea / Woman: stool 3ea
4.Option: Toilet for the disabled/ diaper rack for babies
5.Features: No discharge system mobile toilet

Features
- Heating/Cooling equipment
- Freeze prevention system
- MP3 music system
- Regular checking system
- No need of water supply/sewage
- No sewage discharge
- Recycling circulating system of flushing water

1.Model: Round
2.Standard: W 0000 X L 0000 x H 0000
3.Configuration: Man: urinal 1ea, stool 1ea / Woman: stool 2ea
4.Option: Toilet for the disabled/ diaper rack for babies
5. Features: No discharge system mobile toilet

Features
- Heating/Cooling equipment
- Freeze prevention system
- MP3 music system
- Regular checking system
- No need of water supply/sewage
- No sewage discharge
- Recycling circulating system of flushing water

CT-TSS2000 Time Synchronization System

CT-TSS2000 Time Synchronization System consists of CT-TSS2000 Grandmaster and CT-KZ001 Time Code distributor. Each grandmaster receives GPS or BD as well as external IRIG-B time signal. While the optional CT-KZ001 time code distributors are synchronized by a CT-TSS2000 Grandmaster. The whole system supports multi-format outputs, can meet the demands of various industrial users, is a stable and reliable time synchronization system widely used in power , telecom networks, railways and other fields etc.


Functions
Multiple time signal input: BD B1, GPS L1, IRIG-B code
Multi-format outputs: NTP, SNTP, IRIG-B, Serial and Pulse
1x 10/100 Base-T Ethernet interface for management
Internal precision time-keeping via high precision oscillator
Support IEC61850, IEC60870-5-104 standard
Fault alarm functions for time source, board cards, power supply and so on.
Grid frequency measurement function is optional
Time delay compensation mechanism, compensation range: 20ns~500ms
Time continuity judgment mechanism to avoid output time discontinuity

Features
Support multiple time sources selection
Flexible module card design, easy for outputs configuration
Support duplex, hot standby, cold standby configuration
LCD display with man-machine interaction brings a simple operation
Adapt to the strong electromagnetic interference environments
Redundant Dual power supplies
19’’ / 3U rack mount


Specifications - Grandmaster
Time Reference: BD B1, GPS L1,IRIG-B
Outputs: IRIG-B TTL?RS422/RS485?RS232?fiber?idle contact
Pulse (1PPS, 1ppm, 1PPH) TTL?RS422/RS485?RS232?fiber?idle contact
NTP/SNTP RJ45
Serial(TOD) RS232
Network management RJ45

Time Performance:
Time Accuracy to UTC =1µs(RMS)
Holdover Accuracy =55µs /hr (Lose of GPS after 12hours)

Network Services:
Network Interface 10 / 100M RJ45 Ethernet port, ST fiber port
NTP time sync accuracy 1ms ~ 10ms (depending on the network environment)
NTP access ability 2000 requests per second
Protocols RFC-1059(NTP v1),RFC-1119(NTP v2),RFC-1305(NTP v3),RFC-5905(NTP v4), RFC-2030(SNTP) TELNET, HTTP, (SSH,DHCP,FTP are customizable) IEC61850, IEC60870-5-104
Installation 19 "/ 3U standard chassis

Note: the CT-KZ001 Time Code Distributor receives 2 lines IRIG-B time signal from the Grandmaster as time reference, if any loss of the both 2 lines IRIG-B signal, the internal oscillator will keep working to ensure normal time output. Other detailed parameters please refer to CT-KZ001 Time Code Distributor introduction.

Ceocellular confinement system is a lightweight and flexible three-dimensitional,expandable panels made of high-density polythylene(HDPE) sheets which are ultrasonically bonded together to make to be an extremely strong configuration. Geocell system can be filled with concrete,sand,soil ect.

Features: 
1.Light weight, wear-resistant, chemical stability, anti-aging,anti-ultraviolet, anti-acid/alkali corrosion, applied to different geological conditions, such as saline&alkaline soil, desert, etc.
2.Wide temperature range adaptable, high tensile strength, good rigidity and toughness, good load capacity and anti-erosion ability.
3.Size is variable, change the height and welding distance can meet the needs of different projects.
3.Retractile, easy to transport.

Application:
1.To reinforce the roadbed of highway/railway.
2.To bear the pressure of dam, retaining wall.
3.To prevent landslide.
4.To support the pipeline and sewer.
5.To be used as independent wall, wharf and breakwater, etc..
6.To be used for the management of the desert, beach, river bed and river bank.

Treatment range
1. E.N.T: staphyloplasty, cavernous hemangiomas, nasal hemorrhage, nasal sinus fenestration, rhinitis (chronic, hypertrophy, partial amygdalectomy, subglottic stenosis)
2. Dentistry: dental hypersensitiveness, gingivitis, pericoronitis, apicitis, recurrent oral ulcer
3. Urinary surgery: prostatic hypertrophy vaporization resection, cauliflower excrescence, partial nephrectomy, bladder tumor resection, scrotum cysts, hemangioma resection, ankylurethria, adhesiolysis, circumcision
4. Gynecologyy: cervical erosion, leukoplakia vulvae, condyloma acuminatum, fallopian tube recanalization, ovarian wedge resection
5. General surgery: varicose veinadenomammectomy, hepatectomy, splenectomy,
Hemorrhoidectomy, appendectomy, lumpectomy.
6. Neurosurgery: cerebral tumor, arteriovenous malformation, meningeoma, ventriculostomy, neuroma,
7. Orthopaedics: decretal grain, laser lipolysis, percutaneous laser disk decompressuer, meniscectomy, synovectomy

Technical specifications
Laser type diode laser
Max power (cw) 30w
Wavelength 980nm
Operation mode continuous or pulsed
Pulse duration 0.5999ms
Repetition rate 1, 000hz
Delivery system well-cutting fibersm905 port
Aiming beam 0.13mw (red)diode laser
Input power ac230v 50hz 180va
Output power 0.530w adjustable continuously
Control system lcd touch screen, microprocessor controlled
Cooling system air cooling system
Dimension 430x300x200(mm
N.W 9kg

Introduction:DCS-B/S Series bagging scale system is suitable for packing open-mouth bags made from paper ,platic,jute paper,or cotton with a filling weight ranging from 5-25kg or 10-50kg depend on customer request and weighting sensor .Its capacity ranges from 4 to 6 bags per minute.This nbag packing machine can be applied both for free flowing and non-free flowing granule materials,such as the seeds,grain,feedstuff,chemical raw material fertilizer etc.
Advantages:
High calculating precision,rapid packaging speed,stable function,easy operation.
Adopt advanced techniques on control instrument,sensor,and pneumatic components.
Advanced function:automatic correction,error alarm,automatic error detection.
specification:
weighting range 10-50kg
Accurancy 0.5%F.S.
Throughput(bags/hour) >240
working environment -10 degree ~+40
Air compressor power 1.5kw 0.17mpa

Milk vaccum leak inspection system is used to detect the vaccum leak in the milk

beverage vaccum leak inspection is used on glass bottles with metal covers
Swelled cans, cocked caps, Missing metal crowns, etc

The WHA610 stationary type fixed rockbreaker system exhibits significant advantages in performance parameters.The stationary type fixed rockbreaker system without a hammer weighs approximately 2196KG, and its lightweight design provides a solid foundation for operational flexibility.In terms of homework scope, compared to the maximum working radius of 6000mm of WHA460 model, the working radius of WHA610 stationary type fixed rockbreaker system has been significantly extended by 1530mm. This significant improvement means that it can cover a wider work area, effectively reduce the number of equipment movements, and improve overall work efficiency, especially highlighting its advantages in large-scale site crushing operations.It is worth mentioning that the Stationary type fixed rockbreaker system is completely powered by an electric motor.This design has brought breakthrough performance in energy consumption. Compared with hydraulic excavators powered by engines, it reduces energy consumption costs by more than 85% under the same crushing power. Long term use can save users a lot of operating costs, and it is also more energy-efficient and environmentally friendly, in line with the green development concept of modern industrial production.

Advantages
Green environmental protection and energy saving.pedestal rock breaker boom system can achieve the dual purpose of no emission pollution and low energy consumption. pedestal rock breaker boom system adopts advanced hydraulic power system, in the process of crushing materials, mainly through the electricity driven hydraulic to work, to avoid fuel to provide power to the atmospheric environment pollution. In terms of energy consumption, the pedestal rock breaker boom system uses optimised hammer design and energy efficient motor, combined with the intelligent control system to accurately adjust the operating power of the pedestal rock breaker boom system according to the characteristics of the material and crushing demand, avoiding the waste of energy. Compared with the traditional crusher, its energy consumption can be reduced by 30% - 50%. This low energy consumption is not only in line with the goal of energy saving and emission reduction, but also saves a lot of electricity and fuel expenses for enterprises and reduces production and operation costs.

Reduce the cost of use.Good maintenance performance is a highlight of the pedestal rock breaker boom system, which effectively saves the cost of use of the enterprise. pedestal rock breaker boom system adopts modular design concept, the structure of each component is simple, easy to disassemble and install. When the equipment malfunctions or needs to replace the worn parts, the maintenance personnel can quickly locate the problem and carry out targeted repair and replacement, which greatly shortens the maintenance time and reduces the production loss caused by equipment downtime.

Advantages
Green environmental protection and energy saving.pedestal rock breaker boom system can achieve the dual purpose of no emission pollution and low energy consumption. pedestal rock breaker boom system adopts advanced hydraulic power system, in the process of crushing materials, mainly through the electricity driven hydraulic to work, to avoid fuel to provide power to the atmospheric environment pollution. In terms of energy consumption, the pedestal rock breaker boom system uses optimised hammer design and energy efficient motor, combined with the intelligent control system to accurately adjust the operating power of the pedestal rock breaker boom system according to the characteristics of the material and crushing demand, avoiding the waste of energy. Compared with the traditional crusher, its energy consumption can be reduced by 30% - 50%. This low energy consumption is not only in line with the goal of energy saving and emission reduction, but also saves a lot of electricity and fuel expenses for enterprises and reduces production and operation costs.

Reduce the cost of use.Good maintenance performance is a highlight of the pedestal rock breaker boom system, which effectively saves the cost of use of the enterprise. pedestal rock breaker boom system adopts modular design concept, the structure of each component is simple, easy to disassemble and install. When the equipment malfunctions or needs to replace the worn parts, the maintenance personnel can quickly locate the problem and carry out targeted repair and replacement, which greatly shortens the maintenance time and reduces the production loss caused by equipment downtime.

Advantages
Green environmental protection and energy saving.pedestal rock breaker boom system can achieve the dual purpose of no emission pollution and low energy consumption. pedestal rock breaker boom system adopts advanced hydraulic power system, in the process of crushing materials, mainly through the electricity driven hydraulic to work, to avoid fuel to provide power to the atmospheric environment pollution. In terms of energy consumption, the pedestal rock breaker boom system uses optimised hammer design and energy efficient motor, combined with the intelligent control system to accurately adjust the operating power of the pedestal rock breaker boom system according to the characteristics of the material and crushing demand, avoiding the waste of energy. Compared with the traditional crusher, its energy consumption can be reduced by 30% - 50%. This low energy consumption is not only in line with the goal of energy saving and emission reduction, but also saves a lot of electricity and fuel expenses for enterprises and reduces production and operation costs.

Reduce the cost of use.Good maintenance performance is a highlight of the pedestal rock breaker boom system, which effectively saves the cost of use of the enterprise. pedestal rock breaker boom system adopts modular design concept, the structure of each component is simple, easy to disassemble and install. When the equipment malfunctions or needs to replace the worn parts, the maintenance personnel can quickly locate the problem and carry out targeted repair and replacement, which greatly shortens the maintenance time and reduces the production loss caused by equipment downtime.

Advantages
Green environmental protection and energy saving.pedestal rock breaker boom system can achieve the dual purpose of no emission pollution and low energy consumption. pedestal rock breaker boom system adopts advanced hydraulic power system, in the process of crushing materials, mainly through the electricity driven hydraulic to work, to avoid fuel to provide power to the atmospheric environment pollution. In terms of energy consumption, the pedestal rock breaker boom system uses optimised hammer design and energy efficient motor, combined with the intelligent control system to accurately adjust the operating power of the pedestal rock breaker boom system according to the characteristics of the material and crushing demand, avoiding the waste of energy. Compared with the traditional crusher, its energy consumption can be reduced by 30% - 50%. This low energy consumption is not only in line with the goal of energy saving and emission reduction, but also saves a lot of electricity and fuel expenses for enterprises and reduces production and operation costs.

Reduce the cost of use.Good maintenance performance is a highlight of the pedestal rock breaker boom system, which effectively saves the cost of use of the enterprise. pedestal rock breaker boom system adopts modular design concept, the structure of each component is simple, easy to disassemble and install. When the equipment malfunctions or needs to replace the worn parts, the maintenance personnel can quickly locate the problem and carry out targeted repair and replacement, which greatly shortens the maintenance time and reduces the production loss caused by equipment downtime.

Selection of strong and wear-resistant materials.In addition, the pedestal rock breaker boom system selects high-strength and excellent wear-resistant materials to manufacture key components, such as the liner of the crushing chamber, the hammer head, the rotary base, etc., which have relatively low wear and tear and prolong the replacement cycle after a long time of use. At the same time, the lubrication system of the pedestal rock breaker boom system is carefully designed and adopts centralised lubrication, which can provide lubrication for all moving parts in a regular and quantitative manner, effectively reducing the friction loss between the parts and further improving the service life of the equipment. According to statistics, compared with the same type of crusher, the maintenance cost of pedestal rock breaker boom system can be reduced by about 40%, which significantly improves the economic benefits of enterprises.

Digunakan untuk alat pelatihan sistem pengamanan menggunakan CCTV.
12V DC Power Supply
Digital Video Recorder Control 4 Channel video recorder - Digital Video Recorder AV Transmitter Code approx. 0.1W
Mini A/V 8 Channel AV Receiver AV RECEIVER approx. 100mA Camera Lens approx. 2.8mm F1.4 Auto Iris Lens (DC) 4mm manual Iris
- Pin Hole Camera approx. 1/3" CCD 420TV Line, approx. 0.2 Lux, Lens : approx. 3.6mm - PIR Hidden Camera 420TVL/ approx. 0.5 Lux/F2.0 12VDC/With LED/ approx. 3.6mm Lens Audio Function IR Camera Code approx. 1/4" Sharp Color CCD 420 TVL Lens : approx. 6mm IR Camera With Metal Casing IR Camera 12VDC - Dome Camera Code approx. 1/3" Sharp Color CCD Sensor 380TVL 1 Lux/F2.0 12VDC / approx. 3.6mm Lens - 8 Channel A/V Transmitter Unique frequencies provide 8 channel Audio/Video Wireless transmission distance approx. 1500m available(Line of Sight) Support connection with Yagi Antenna or SMA Antenna replaceable
- CCD Camera Code approx. 1/3" Color CCD 380 TV Line Built in Microphone, approx. 0.5 Lux jpeg Smoke Detector Camera approx. 1/3" Sharp Color CCD Sensor Smoke Detector Camera 380TVL 1 Lux/F2.0 12VDC/ approx. 3.6mm Lens - Monitor Safety Connecting Lead approx. 4mm connecting Lead
Vertical Frame High Level : Din Standard approx. A4 with two shelfs Material : Aluminium Side Frame :T shape
Manual book

L-feet solar mounting systems are widely used to install solar panels on pitched trapezoidal roofs. They consist of L-shaped brackets that provide a secure and adjustable base for mounting the panel. Use a waterproof material such as rubber or EPDM (ethylene propylene diene monomer) around the L-foot bracket. Flashing is installed above brackets and below shingles or other roofing materials to prevent water intrusion.

Introduction of HK Large Extruder Production System
KY also offers a larger-scale HK chinese double screw extruder, with the commonly used screw diameters ranging from 110 mm to 165 mm (HK110-165) available for user selection. According to the material and process, the process components with a length-diameter ratio of 72:1 can be provided, and enough reaction residence time can be provided to achieve the best dispersion and mixing effect.

Large twin screw extruders are mainly used for polyolefin granulation, which is particularly common in petrochemical enterprises. The usual PE and PP granulation of this large extrusion screw for sale is the typical operation of this application. HK125 large twin screw extruder has a large market share in special extrusion, such as UHMWPE fiber and lithium battery diaphragm extrusion.

Advantages of HK Large Extruder Production System
The parts in the processing section are common to AK and SK series to ensure continuous process consistency

Keya exclusively uses a series of newly designed and developed screw originals, which can meet the requirements of different working conditions and make them have a wider range of processing adaptability

Using German standard spline, optimized tooth profile, with higher bearing capacity

Accurately calibrate the coaxiality of the whole machine assembly

Strict ELP is performed before leaving the factory to ensure that users are provided with the highest product quality

Large twin screw extruder also has many successful applications in polymer devolatilization and reactive extrusion. Special extrusion and professional applications can contact KY for consultation. KY has many years of experience in the production and process of large-scale equipment, plus a good manufacturing system can provide users with more and larger production systems.

Basic Info.
Model NO.
BZ-1000-3000
Max.Capacity
>400 L/min
Driving Type
Motor
Power
Hydraulic
Start Up
Electric Pump
Type
Dredger
Application
Slurry Pump
Industry
Booster Pump
Transport Package
in Bucks or Container
Specification
1000m-3000m
Trademark
HENGPENG
Origin
Shandong, China
HS Code
89051000
Introduction
Introducing the cutting-edge booster pump stations from HENGPENG, ingeniously crafted for compatibility with both trailing suction hopper dredgers and cutter suction dredgers. These indispensable stations come into play when the desired discharge length surpasses the limits of the primary dredging pump. By strategically integrating one or more booster pumps along the discharge pipeline, you can drastically extend the transportation range of materials, guaranteeing seamless and efficient dredging operations without interruptions.

GPS synchronized clock system offers accurate time to all clocks in the system. The GPS clock synchronization system consists of a master clock and multiple slave clocks. The master clock communicates with all the salve clocks via wired/wireless medium in the system to provide them with an accurate time source. The objective of the GPS synchronized clock system is to make sure that all clocks in the system display the same time. Regardless of which part of the building you are in, the time shown by the clocks will be uniform and accurate.

GPS synchronized clock system is a cost-effective design to synchronize the clock to accurate time with respect to universal time coordinates. In GPS synchronized clock system, the master clock receives time from either an NTP server or GPS receiver, then the time is distributed to all slave clocks in the system and ensuring that all clocks stay synchronized and do not drift from their accurate time. GPS clocks continue to work during power outages, adjusting to re-acquire the precise GPS time once power is restored. In the case of non-availability of the GPS signal, the slave clocks have an inbuilt RTC ( Real-Time Clock) to continue showing the accurate time.GPS synchronized clock automatically adjusts for Daylight Saving Time ( DST ). The slave clock is wall/panel / tabletop mountable. The cabinet is made up of Mild Steel or Aluminium or Stainless steel as per customer requirements. The slave display can show either UTC time or local time. Slave clocks are available in 50mm, 100mm, 144mm & 300mm sizes.


FEATURES


High bright 7 segments LED displays to show GPS Time
5 x 7 Dot Matrix LED displays day of the week
Accepts Time Signals like NTP, IRIG-B and RS485/RS232
Available in 50mm, 100mm, 144mm & 300mm sizes
Time updates with high stability oscillators option available
The input power supply can be customized
10/100MBps NTP & SNTP Ethernet for time input
Power Over Ethernet option available
Display running with battery backup option available
Wireless display option available
It can show either UTC or Local time
Adjustable Time Zone, DST, 12/24Hrs in Ethernet Display
Rugged and Robust displays
Isolated and protected Interfaces.
Battery backup provided for the time update
Cabinets made up of MS/SS/Aluminium
The cabinet is powder coat finished
Wall / Panel / Tabletop mountable
Protection class IP 20
Time signal Input status and GPS lock Status can be identified with colon LEDs
Front plate covered with Red color acrylic sheet

Specification of Gastec Gas Detection System Detector Tubes/gastec tube detector 35
Tube No.: 35
Chemical formula to be measured: Sulphuric acid( H2SO4)
Measuring Range: 0.5-5mg/m3
Shelf life: 2 years (after production)
We have more than 600 types of tube, for other tubes and specification details, please contact us at info@hn-guangqun.com

Features of Gastec Short-term quick-measuring detector tubes
(1)On-site measurements can be performed easily by anybody, anytime and anywhere, in a short time
(2)Easy-to-check direct reading possible due to calibrated scale directly printed on the tube
(3)An extensive measuring range can be obtained by adjusting the sampling volume
(4)In order to assure high precision, each production lot is tested and calibrated independently, Each detector tube has its own quality control number printed on the tube
(5)Long shelf-life with excellent long-term stability

Product description of Gastec Short-term quick-measuring detector tubes
As a leading global brand in gas detection and measuring, GASTEC products are highly regarded in many industries and customers all over the world.
GASTEC gas detector tubes are thin glass tubes with calibration scales printed on them so you can directly read concentrations of the substances (gases and vapours) to be measured. Each tube contains a particulate matrix (e.g. silica gel, alumina) which binds carefully selected and highly stable detection reagents that are especially sensitive to the target substance in order to produce a distinct layer of colour change. The tubes are hermetically sealed at both ends.

Our Competitive Advantage
1.With 20 years exporting experience
2. Certificate: ISO, SGS, SEI
3. Price at least 5% Lower Than other competitors in China
4. Shipment: 10% Faster than other suppliers, For some ordinary Items, we have in stock and can send within 3 working days
5. Technology Support: According to customer's exact requirements, supply valuable solutions
6. Service: your inquiry can be replied within 24 hours during working days

Product Information
SKU No
: SPFM-0014-00009
KBKI code
: 38996
Category
: Other School Props
Subject to VAT
Brand/Publisher
: TRAINER FEST
Condition
: New
Warranty
: Shop
Long
: 120 cm
Wide
: 35 cm
Tall
: 170 cm
Heavy
: 40 gr
Delivery time
: 5
Shipping Method
: WE DO NOT READY STOCK, ADVERTISED IMAGES ARE ONLY EXAMPLES OF ITEMS THAT HAVE BEEN ORDERED.
Delivery Guarantee
: 5
Product Description
PGM-FI Injection System Simulator
Functions for simulation:
- Ignition System
- Charging System
- PGM-FI Fuel System
- Troubleshooting MIL
- Reset ECM and TP
- Altitude settings

Support:
HIDS scan
SCS connector
Jumperlines

Installed Components:
Speedometer
Stator Magnet Rotor
ECM
Ignition Coil
Spark Plug
Throttle body
Censorship
Injectors
Fuel Pump
Gas grip
Ignition Switch
Relay Fuse Box
DLC ports
Troubleshooting button

Resource :
AC 220V
Switching
DC 12V 20A output

Driving Dynamo:
AC 220V
12W 50hz
7000r/min

Frame:
Material: Aluminum
White color

Dimensions:
Length: 985 mm
Width: 500 mm
Height: 785 mm

Screen :
double 2 mm Acrylic board.

Connecting:
4 mm banana plug jack jumper cable

PT FEST MEDIA SOLUTIONS
PTFEST MEDIA SOLUTIONS
FEST MEDIA SOLUTIONS
#ptfestmediasolutions
#festmediasolutions

Radio-Frequency Plasma System AS-V100
Merits:
Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes.
Application fields:
Suitable for PCBs,FPC IC substrates, LCDs, PV batteries, semiconductors, PTFE, automotive interior parts, medical equipment, plastic and rubber products.
Product Specifications:
1.Outline Dimensions (footprint):1200*800*1750H mm
2.Vacuum chamber size:450*450*610mm
3.Power frequency:13.56MHz
4.Power supply:1Kw
5.Electrode plate specifications: Non-standard customization
6.Software control: PLC touch screen
7.Gas purity requirement: Industrial grade gas or better
8.Loadable gas:O2 N2 Ar
Features & Performance:
1.User-friendly automatic control interface with a touch screen for easy operation.
2.Unique cavity design ensures excellent cleaning uniformity and high cleaning quality.
3.Utilizes a two-layer structure with 4-6 material boxes per layer, combining chemical reactivity and physical impact for a short cleaning cycle and high efficiency.
4.Plasma cleaning offers high repeatability, strong controllability, high utilization rate, and operates with no pollution and low operating costs.
5.Features a simple structure, compact footprint, high efficiency, easy operation and maintenance, fast speed, and stable performance.
6.Enhances the surface wetting ability of the lead frame or substrate before D/A, ensuring precision and firmness in subsequent processes.

Horizontal Plasma System AH-V1000
Merits:
Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes.
Application fields:
Suitable for PCBs,FPC IC substrates, LCDs, PV batteries, semiconductors, PTFE, automotive interior parts, medical equipment, plastic and rubber products.
Product Specifications:
1.Outline Dimensions (footprint):1850*1800*2100H mm
2.Vacuum chamber size:1450*670*950mm
3.Maximum Treatment Area:1290*570mm
4.Maximum number of processing layers:13 layer
5.Input voltage:3-Phase 380 VAC~440V, 50 Hz/60 Hz
6.Output frequency:40KHz
7.Output power:10Kw
8.Discharge vacuum:20Pa-80Pa
9.Loadable Gases: O2, N2, H2, CF4
10.Treatment Time for Each Batch: 15~30 minutes
Features & Performance:
1.Suitable for large quantities of PCB/FPC and other products across a wide range of applications.
2.Short processing time and high efficiency to improve production capacity.
3.Extremely simple and convenient operation, with low usage costs and easy maintenance.
4.Dry process with no residue left on the product surface after treatment, ensuring no discharge of pollutants and providing a safe and environmentally friendly solution.

Product Information
SKU No
: SPFM-0014-00001
KBKI code
: 62090
Category
: Other School Props
Subject to VAT
Brand/Publisher
: TRAINER FEST
Condition
: New
Warranty
: 1 Month
Long
: 120 cm
Wide
: 25 cm
Tall
: 170 cm
Heavy
: 45 gr
Delivery time
: 10
Shipping Method
: Pre Order Min 7 Days
Delivery Guarantee
: 20
Product Description
SPECIFICATION:
Dimensions 120x25x170 cm
Intel core i5
RAM 4
HDD/SSD
Psu 450 w
19" Monitors
Key mouse

The A-type automatic layer cage system gets its name from its frame, which looks like the letter A. Its trapezoidal frame ensures stability. But it typically only has 3 to 4 tiers due to this shape. The Livi A-type layer chicken cage system is equipped with automatic systems for feeding, drinking, manure removal, egg collection, and environmental control. These layer chicken cages allow farmers to improve their egg production and maintain a profitable and sustainable poultry business.
Brief Details
Material International Q235 steel.
Anti-corrosion Treatment Process Hot-dip Galvanized, Aluminum-Zinc Alloy
Lifespan 15 20 Years
Certificate ISO9001, ISO14001, OHSAS18001, CE, SONCAP, PVOC
Production Lead Time Depending on the order quantity. Normally about 10 days for 20ft container, 15 days for a 40ft container.
Supply Ability 10000 Set/Month
Packing Method Normal export packing. 20ft / 40ft container.
Payment Method T/T, L/C at sight
Trading Method EXW, FOB, CFR, CIF

Chlorine Gas Leak Arresting System :

We are a leading Manufacturer of Chlorine Gas Leak Arresting System- Emergency Kit B from Chennai, India.

Chlorine Gas Leak Arresting System- Emergency Kit B :

Design- Rsvp
Frequency-50Hz
Power Source-Electric
Is It Rust Proof- Rust Proof
Country of Origin- Made in India
Voltage -115 or 230 V

The Chlorine Institute Emergency Kit B is manufactured to the design specifications of the Chlorine Institute. The Emergency Kit B contains devices to stop leaks at the valves, fusible plugs, and in the side wall of chlorine one ton containers which conform to specification

We provide  Balance Testing,Biomedical,Healthcare Refrigerators & Freezers,Feeding Pumps/IV Pumps,Emergency Medicine,Electrosurgery,Disposables,Cognitive Measurement & Management,Defibrillators & AEDs,Dental,Dental Products,Allergy Testing

Overall solution for next episode of spinal surgery
Optical measurement camera
Tracking and navigating in sub-millimeter accuracy
Overall tacking/processing unit

Overall design of workstation and optical measurement camera helps to maximize space in the OR

Self-adaptive calibration
Perlove Medical is the first manufacturer in China that combines intraoperative 3D imaging C-arm and spine surgical navigation system.
Equipped with the intraoperative 3 D imaging C arm system which independently developed and produced by Perlove, PL300B, which integrated with self-adaptive calibration technology, can realize image automatic registration, and automatically estab-lishes the association of three coordinate systems, the optical position gauge, the patient and the image.
No manual intervention is required in registration process, and the accuracy is not affected by the image quality. It brings stron-ger system compatibility, more accurate coordination matching and more convenient calibration.Self navigation

Surgical arm can be precisely sent to the right position through wellplanned trajectory, ensuring consistency between pre-op surgicalplan and intra-op surgical outcome.

Real time motion tracking

Real time motion tracking and position modifing, ensuring precise screw placement.

High-precision robotic arm

The smart navigation system and robotic arm deliver high degree ofaccuracy, effectively decreasing complication rate and revision rate.

Positioning with accuracy

Equipped with cutting-edge optical tracking sensor and robotic arm,PL300B utilize intraoperative 3D based imageto make pre-operative plan, allowing surgeon to performspinal MIS with submillimeter accurate navigation.Especially for high-risk and complex procedure, it hasobvious advantages and can effectively reduce surgicalrisk.

Industrial RO System(Reverse Osmosis System)
Purified Water is a kind of water which has slmost all the conducting meium ,colloid and organic matters (including bacteria)removed .Purified water has conductivity of about 0.1--0.55�?�¼s/cm ,resistivity(25�?�°C) above 10M�?�©.cm,and TDS less than 0.1mg/l,In theory,the conductivity of purified water is 0.055�?�¼s/cm,and its resistivity(25�?�°C) is 18.25M�?�©.cm.Our company can supply various industrial RO systems according to customers detailed requests ,such as single pass RO filter,double pass RO filter,RO+EDI ,RO+mixed bed ,etc.
General Principle of Water Purification System
Raw Water ----Raw Water Pump----Mechanical Filter ---Activated Carbon Filter---Precision Filter---First Pass RO----Second Pass RO---TOC remover---EDI System or Mixed Bed
Technical Parameter of Industrial RO System
Rejection:99.8%
Organic Removing Level:150MW
Bacteria Removing Level:99%
Pyrogen Removing Level:99%
Particle Removing Level:99%
Requests on Inlet Water
SDI5
Residual Chlorine:0.1mg/l
PH:5-8
Application Field of Industrial RO System
A.Electronic industry,chemical industry ,pure water factory
B.Direct drinking water for villa ,apartment ,hotel,etc
C.Output water capacity:0.25--200m3/h

HQ mount no penetration easy install solar ballasted roof mounting systems ballasted mount flat roof solar mounting bracket

Ballast mounting system with great flexibility and lower cost, ballast mount can be used for both commercial and civil flat roof solar system.



Material
Al 6005-T5/AL 6063/AL available
Surface
Anodized,Black Electrophoresis
Installation site
Flat solar roof top mounting system
Certification
ISO,SGS,Aluminum testing report
Installation direction
Horizontal/Vertical
Applicable panels
All kinds of panels

Applicable Industries: Poultry Farms
Use: Broiler Chicken
Material:PP Plastic Raw Material
Slaughter Weight:1.5 1.8 2.25 2.5KG
Certification:ISO 9001,SONCAP
Life Time:15-20 Years
Main Advantages:1.Long-lasting quality, hot-dip galvanized material with 15-20 years service life. 2.Intensive management and automated control. 3.No waste of feed, save feed cost. 4.The sufficient drinking guarantee. 5.High-density raising,saves land and investment. 6.Automatic control of ventilation and temperature.
Automatic System:Automatic Feeding System,Automatic Drinking System, Soft PP Plastic Slat,Automatic Manure Cleaning System,Enviroment Control System,Prefab Steel Structure.

*Simple installation, screw in -like a bulb
*New to market, providing double mode, AP mode
/ Wi-Fi mode
*Support Wireless Alarm Sensors(optional)
*Remote access by SmartPhones(Andriod)/ iPhone/
iPad/Notepads/ Notebooks/ PC/ Mac
*Using Peer to Peer technology, plug to play
*Using 1.0 mega pixel image sensor
*H.264 HD 720P Camera
*Accept Worldwide Voltage AC 100 -250V
*Using 36pcs IR LEDs(940nm wavelength), night vision
distance 10 meters
*Double alarm alerts, email alert and mobile push alert

UTF01 is a filling peristaltic pump independently developed by Chuangrui Pump. It consists of an intelligent filling system and the main controller. The standard drive unit is 4 channels (2 3 4 5 6 optional), which can be expanded up to 32 channels. UTF01 can be installed with multiple types of pump heads and adapted to multi-specification tubes, which can fully meet customer application needs and provide more flow selection. Various functions, large screen display, touch screen operation, accurate flow, make filling production more peace of mind. Multiple channels can be opened at the same time for liquid filling, or the filling value of each channel can be set individually for filling. Support customized solutions.

Self Drilling Anchor Bolt Systems Manufacturers Exporters in India

The system always works with the minimum light programmed in the light controller console for that location, with maximum efficiency when using only artificial lighting in the proportionality necessary to maintain this value.

Maximizing the efficiency in lighting regulation of the associated industrial Led.

The Uranus System allows the maximum use of natural sunlight by combining it with the most efficient industrial complement LED technology to always have the desired level of interior lighting of the space with the minimum associated cost.

The Light Controller Console allows you to select the desired lighting level for the location.

If natural sunlight is sufficient then the LEDs remain off.

As natural sunlight begins to dim then the LEDs begin to increase their power so that the programmed level of Lux inward can be maintained throughout the day and time.

In this way we can achieve maximum efficiency with minimum energy consumption.

Product style: Sphere, Cylinder, Rubber piston. Product softness: Softer, Medium, Harder. They are suitable for cleaning of various pipeline systems, customers can choose them according to their needs.
It is made of high quality polyurethane foam, it has uniform foaming and smaller bubbles, so it has strong tear-resistance.
It has good resilience and excellent cleaning effect.
We can customize all kinds of accessories for cleaning. In addition, this product has no minimum order, so you can customize just a few or even just one piece.

SWG-12 Mobile Cable Test and Fault Location System - is a complex solution for safe, fast and easy locating a faulty place on low and medium underground voltage cables. It includes a powerful high-voltage unit, which has a test, burn and surge generation modules, and a time-domain reflectometer for locating faults on cables.

Main features:
- Suitable for portable application
- Easy to operate
- Multiple fault location methods included
- 10.4 High-contrast color TDR display
- Improved convenience for operator
- Heavy duty

The high-voltage unit of the system provides with high-power up to 1100 Joules surges at 3; 6 and 12 kV ranges. At each range, the output voltage is smoothly adjustable. The rate of surge waves can be smoothly adjusted. The single manual shot option is also included. The DC output mode is provided for quick fault diagnostics. The 100 mA burn mode is available.

Digital Impulse Reflectometer (TDR) provides you with 10.4-inch bright high-contrast TFT display with touchscreen. The 800 Ã? 600 pixels resolution makes the picture sharp. The touchscreen allows an operator navigate through the menu fast and easy. An alternative way of navigation is included. It is provided with a control knob.

Reflectometer RIF-9 integrates a multiple ways of fault prelocation. It can be used either as a standalone device in TDR mode or in a conjunction with HVmodule, working in arc reflection mode.

Reflectometer RIF-9 has USB interface. The package content includes software for PC (optional), which allows working with saved reflectograms. The firmware can be easily updated through USB interface by inserting a flash drive.

Condenser and Heat Exchangers tube scaling is one of the most hardest problems in the industry. It results in decrease of productivity and efficiency of the plant.We provide cleaning technology prevents heat exchanger tubes from accumulating mud, scale, or biological fouling.
EQOBRUSH online tube cleaning System can control the generation of dirtSpecialized cleaning brushes can make every tube get cleaning. When the brush finish cleaning, they will come back to the basket where they are prepared for the next cleaning cycle. It can clean 4-6 times a dayyou can set the times according to real situation.
The advantages
Heat transfer continuously occurs at maximum efficiency
Online heat exchanger cleaning requires no process shutdown
Chemical-free â?? no chemical handling or disposal hassle
Fully automatic for effortless maintenance

automatic on-line cleaning systems guarantee optimal performance at all times by preventing fouling or scaling in the tubes of heat exchangers or chillers. Using Eqobrush you will realize substantial savings in energy cost and increase system capacity.