The PVMet 100 includes all the same sensor options as the PVMet 75 but offers an adjustable EKO ML-01E Irradiance Sensor that can be set to provide Global or Plane-of-Array Irradiance. The adjustable option provides installers the flexibility to match the sensor to the PV panel angle. Compact and simple to install on any solar project, the PVMet 100 connects to Modbus RTU Communication with an ethernet TCP option available. Ships fully assembled and factory calibrated.
The PVMet 75 is a compact and lightweight solar monitoring station featuring a Global or Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), and an Ambient Air Temperature Sensor. Simple to install on any solar project, the PVMet 75 connects to Modbus RTU Communication with an ethernet TCP option available. Ships fully assembled and factory calibrated.
Name: 3-Phase Electric Measuring Transformer Monitoring and Alarm Remotely
The Cellular(GSM/GPRS/3G/4G/NB-IoT) 3-Phase Electric Measuring RTU is special designed for remote monitoring transformer, and measuring the 3-phase 3-wire, 3-phase 4-wire distribution power voltage, current, factor, watts, frequency, active power, reactive power, when overload or loss phase or exceed the pre-set value, then it will alert by SMS, Voice call, Cloud, APP, Wechat, Web Server, SCADA, HMI, DSC immediately.
The Cellular 3-Phase Electric Measuring RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, integrated special measurement chip and inbuilt industrial Cellular module. It provides 4 digital inputs, 2 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity.
The Cellular 3-Phase Electric Measuring RTU also can be used for monitoring the safety and security of the transformer, e.g. overload, phase loss, oil temperature, oil level, burglarproof, fall down etc.
The Cellular 3-Phase Electric Measuring RTU can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
Mainly Features:
1. Can be operated from anywhere, no distance limitation;
2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside.
3. 3G/4G/NB-IoT Modules are optional;
4. Modular design, can easily upgrade the cellular module if network upgrade;
5. Embedded ARM® Cortex�-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog;
6. Wide range power supply 12~36VDC with over voltage and phase-reversal protection;
10. 1 ambient sensor input for monitoring onsite temperature and humidity;
11. Provide additional 4 analog inputs, compatibles 4~20mA or 0~5V, can be change to PT100 temperature probe to measure the oil level or oil temperature ;( Optional)
12. Supports phase loss, phase recovery, voltage overload, current overload detection and alarm;
13. Inbuilt inter-lock logic programmer and powerful timer program function;
14. Resend the data while communication failure and alert to users by SMS;
15. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications and so on.
AC800F, the hybrid process control system, combines the best of both worlds, DCS and PLC. It offers PLC size and price with functionality of a DCS. Freelance is proven in more than 14,000 applications in all industries.
3BDH000022R1 EI813F Ethernet module
3BDH000030R1 FI810F CAN module
3BDH000031R1 FI820F Serial module
3BDH000032R1 FI830F Profibus-DPV1 module
3BDH000033R1 FI840F Foundation Fieldbus module
3BDH000530R1 PM803F CPU Module
3BDH000013R1 SA811F Power supply module
3BDH000014R1 SD812F Power supply
3BDM000160R1 TB870F Terminal block
3BDM000103R1 TK811F CAN cable
3BDM000150R1 TK821F serial Cable
3BDM000100R1 TK831F CAN Cable
3BDM000202R1 TK890F Diagnostics cable
3BDM000201R1 TK891F Diagnostics cable
3BDH001001R0001 PM901F Central Processing Unit
3BDH001000R0001 PM902F Central Processing Unit
3BDH001005R0001 CI910F CAN Module
3BDH001010R0002 CI930F Communication Interface
Characteristics:
1. Shengbao FF series Full-face respirators are newly designed to have excellent airtight ability, more comfortable and long lasting protection.
2. Made by Non-Toxic rubber, soft and durable. Comfortable five-strap harness with roller buckles. Built-in speech diaphragm permits clear communication.
3. Shengbao FF series Full-face respirators offer flexible and freedom for working in variety of industrial environments and temperatures. Wide polycarbonate lens features a dual coating: scratch resistant on the outside, anti-fog on the inside.
4. Shengbao FF series Full-face respirators offer various configurations available depending on the working environment for the best suit.
Z-SG is a strain gauge signal converter. Measurements taken using the 6-wires or 4-wires technique are available through Modbus-RTU serial protocol or the analog output. Sensitivity from 1 to 64mV/V, settable by DIP-switch for integer values, via software for real/integer values by connecting to the device via the microUSB port on the front panel. Stable weight indication via Modbus register/digital output. Remote writing of the tare in volatile and/or non-volatile memory by digital input/Modbus register/Modbus commands. Z-PC-DINAL2-17.5, Z-PC-DIN2-17.5, and Z-PC-DIN8-17.5 are mandatory accessories for ModBUS configurations.
The IoT10 Series wireless temperature and humidity IoT sensor are low power comsuption design,it is a wireless Internet of things gateway, designed for converting DS18B20 Temperature sensor signal to Wireless communcation over SMS/GPRS/3G/4G/NB-IoT Cellular Network, and connect to the IoT Cloud Platform.Widely used to real time remotely monitoring temperature of Refrigerator freezer, chicken factory, chemical plant, food production and storage, warehouse, hospital etc.
1. Can be used as a complete product or as a secondary development module;
2. Two working modes are available:
Normal mode: Real-time data transmission,Users can inquiry the real-time status;
Low power consumption mode: Ultra low power consumption(ï¼?230uA);
3. Multiple communication methods:GSM,GPRS,3G,4G,NB-IoT,LoRa,Ethernet,etc;
4. Coverting DS18B20 temperature probe signal to cloud platform over cellular network;
5. Support configure parameters and query real-time data via SMS,software,cloud platform;
6. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message;
7. Support two different server centers,can set IP address or domain name ;
8. Support Modbus RTU over TCP and MQTT protocol;
9. Wide range power supply 7~24VDC with phase-reversal protection;
10. Using Nano sim card,support PIN code function;
11. Provide PCBA or waterproof enclosure,can be used outside.
24 bit accuracy, have been calibrated all signal input before ex factor. Also, users can programme himself, two input types must be same when testing two signals.
Communication software:
Communication interface: 1 standard rs485 interface or 2 standard rs232 interface
Communication agreement: standard ascii, modbus, can make network communicate
With plc, rtu or watch software.
Data format: 10 bit, 1 start bit, 8 data bits, 1 stop bit.
Communication address (0~255) and baud rate (300\600\1200\2400\4800\9600\19200\
38400bps), max. Communication distance: 1200m, connect by both twists shiled cable. ¡¨¤ 15kv esdprotection, communication response time is less than 100ms.
Anti jamming:
Set checksum according to need. Its inside contains momentary bate diode, can
Restrain surge impulse, protect modules.
Communication interface
485: output is rs-485 interface
232: output is rs-232 interface
232/485: output is rs-232orrs-485interface, rs232/485 switchover freely
The PVMet 330 is a complete monitoring experience with our full range of sensors to optimize PV power generation. The PVMet 330 includes an option for both a Global and Plane-of-Array Irradiance Sensor, one or two Back-of-Panel Temperature Sensor(s), an Ambient Air Temperature Sensor, a Wind Speed and Direction Sensor, a Relative Humidity Sensor, a Barometric Pressure Sensor, and a Rain Gauge Sensor. Simple to install on any solar project, the PVMet 330 connects to Modbus RTU Communication with an ethernet TCP option available. Ships fully assembled and factory calibrated.
SL1168 Ultrasonic Flowmeter
Specifications:
Accuracy: +/-1.0% of reading from 0.03 to 16fts (0.01 to 5m/s)
Repeatability: +/-0.3% of reading
Wide turndown ratio
Bi-directional flow range of 0.03 to 16 ft/s (0.01 to 5m/s)
Pipe sizes from 1 to 48 inches (25 to 1200mm)
Process pipe-wall temperature: 32 to140 (0 to 60)
Power supply: 10 to 24 V AC or 10 to 36 V DC at 1A
Output signals: 4-20mA
Pulse (configurable)
Relay (configurable)
Digital communications: RS-232, RS-485, Modbus RTU
The product increases production efficiency for customers with compact structure, powerful functions and convenient operation.
Integration of standard rs485 with modbus rtu communication protocol makes it convenient to communicate with other equipment.
The instant-use type software offers standard application without adjustment of the parameters.
Connection of the converter with remote display terminal is available.
Parameter configuration is easy and fast and the specially designed short menu avoids the trouble of browsing the whole menu.
The converter reliably works at ambient temperature of 55¡ã c without derating.
Model:S273
Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485+64Registers)
The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications.
2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery;
3. 4G SD card for save historical data, USB port for configuration and upgrade firmware;
4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA;
5. 4 Relay outputs, 5A/30VDC,5A/250VAC;
6. 8 digital inputs, dry contact or level input. One of the input can be used as counter;
7. 1 temperature probe input, 1 humidity transducer input;
8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection;
9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network;
10. RS232/RS485 can performs Modbus RTU Master, Modbus RTU Slave, supports 01,02,03,04,05 code, up to 64 registers, the register arise alarm also can send SMS to alert;
11. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC;
12. Automatically resend the data while communication failure, GPRS failure will alert by SMS text;
13. Supports remotely restart the RTU, and configure it by SMS commands remotely;
14. Supports over voltage protection and phase-reversal protection;
15. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message.
16. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.
The GSM 3G 4G LTE Environmental Monitoring Alarm is special for remotely monitoring onsite temperature,humidity,power status through wireless GSM/3G/4G Network.When the temperature,humidity, power voltage exceed high threshold or low threshold value,will send SMS alert to upto 10 preset mobile phone immediately,It supports Modbus TCP and Modbus RTU Over TCP,can be integrated to Cloud Platform.
1. Can be operated from anywhere, no distance limitation;
2. No call charges for inquiry. the GSM 3G 4G LTE Environmental Monitoring Alarm,rejects the call from authorized number then return onsite temperature, humidity, and power voltage on the first 'ring';
3. Multiple applications. (temperature, humidity, power status, solar panel, dc voltage);
4. Up to 10 authorized phone numbers, 5 can be used to receive call or SMS,and 5 can be used to call and SMS while alarm occurrence;
5. One Temperature & Humidity sensor input, measures temperatures from -40-80�°C,0.5�°C accuracy, Relative Humidity from 0-99RH%, accuracy is 3%;
6. External AC Power status monitoring, AC On/OFF will send SMS to authorized phone numbers;
7. Inbuilt MCU monitoring the DC input Voltage value, measure range is 9-24VDC, no need additional sensor to save cost;
8. Timer Reportâ??Can setup every x hours automatically send its status/Value to the authorized numbers;
9. Support remotely read historic data via SMS;
10. Support Modbus TCP and Modbus RTU Over TCP protocol for cloud monitoring;
11. Rechargeable Backup Battery inside can last 8hours;
12. Secure - Using caller ID and password for identification, unknown callers are ignored;
13. Programmable by SMS Commands or APPs with password protection;
14. Based on GSM Network, applied to many applications.
15. Remote Reset via SMS, Remote Reboot via SMS, Automatic Reboot Periodicity.
1013 Modbus Rtu To Fieldbus Ff Built In Module Suppliers
Short on time? Let Modbus Rtu To Fieldbus Ff Built In Module sellers contact you.
