oxygen pressure range 2 mbar - 3bar
zirconium dioxide (zro2 ) sensing elements
non-consumption technology
integral heating element
no need for temperature stabilisation
no reference gas required
high accuracy
linear output signal
operates with external interface boards
Specifications
Heater supply*
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2 v dc (0.85a)
Soklin Antisep is the first detergent in Indonesia that combines detergent + protection (disinfectant). With Active O2 Power Technology as a disinfectant, it effectively kills viruses, bacteria and germs attached to clothes faster and in more quantities than ordinary detergent.
Ready in 2 size:
- 12 x 700 gram
- 6 x 1400 gram
TVS Neo XR by the Duralife Engine, which combines a sophisticated roller-follower mechanism and a high-pressure oil lubrication system to dramatically reduce friction, making it more durable. By continuing to carry iEcono technology, it helps drivers control fuel usage. iEcono technology is supported by a Throttle Sensor which stimulates the optimal ignition system according to driving conditions.
Reliable galvanic sensing technology
Compact 12mm design
For portable, laboratory or on-line use
Optional integral atc element
Easy to use pre-membraned replacement caps
The do1200 and do1200tc feature dependable galvanic technology. No warm up period is required. Sensors are supplied with fast responding hdpe membrane caps for portable or lab use. Optional ptfe membrane caps are available for on-line or heavy uv exposure applications. Fill solution is replaceable when required.
The do1200 is supplied without internal temperature compensation. The do1200tc can be supplied with a variety of user defined atc elements. Standard cable length is 2.5 feet with a tinned lead termination. Longer cable lengths and connectors are available for an additional charge. For on-line use, our fc75p 3/4 inch in-line fitting may be ordered to provide for mounting into 3/4 inch fnpt threaded tees.
Do1200 laboratory dissolved oxygen sensor specifications
Range: 0-20 mg/l
Body material: epoxy and noryl
Max temperature: 50 degrees c
Saturation output:
Hdpe = 47mv +/- 9mv,
Ptfe = 33mv+/-9mv
Pressure: 0-100 psig (7.5 bar)
Calibration: single point in air
Response time: after equilibration, hdpe 1 minute for 2mv, ptfe 2 minutes for 2mv
15578 O2 M2 Oxygen Gas Sensor (O2 Sensor) Suppliers
Short on time? Let O2 M2 Oxygen Gas Sensor (O2 Sensor) sellers contact you.
PCFS-IR2125A level sensor contact type, it is used for tube. The principle is infrared, output signal is analog. When there is no water, the sensor outputs low voltage value; When there is water, the sensor outputs a high voltage signal. The size can be customized. The photoelectric liquid level switch has high precision, low price, high reliability and wide application environment, it is less affected by strong acid, alkali and viscosity. Photoelectric level sensors can be used for higher liquid level accuracy requirements.
China supplier Sensor D-100-02-01 for Kothagudem power
Deyang YOYIK is a strong technical force, first-class product quality, brand reputable large-scale mechanical and electrical equipment Limited. Company products covered a wide range of products sold worldwide, a number of users trust. Acting foreign first-class brand, EATON VICKERS, star, and so on products. Guarantee genuine, the spot sale.
Yoyik can offer many spare parts for power plants as below:
Agecho ultrasonic sensors salient features:
Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c.
Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available.
Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band).
Agecho accuracy is 1% of the full scale.
Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional)
Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module.
Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use.
Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target.
Agecho operating temperature 0 to 65 degree celsius.
Agecho temperature compensated measurement for better accuracy (optional).
Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.
Professional; improving; cooperation; win-win: these are our philosophy. We believe quality is the life of company and honesty is the basic rule of market. We will try our best to offer satisfying service. And welcome your cooperation.
The dis include: current sensor, voltage sensor, photo gate sensor, light level sensor, force sensor, micro current sensor, motion sensor, temperature sensor, gas pressure sensor, sound sensor, 1394 interface data line, usb date line and dislab software.
CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
Detection range: 0.05 -5m
Accuracy: 0.1, 0.2, 0.5
Pressure range: -0.1MPa-32MPa
Probe temperature resistance: -50 -250
Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication
Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier)
CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200, can be connected with various protocols
CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200, low viscosity fuel, can be connected with various protocols
Items
Technical parameter
Detection Range
a1000ppm
Max detecting bound
2000ppm
Detecting life
5 years
Sensitivity
0.015
Resolution
0.5ppm
Temperature range
Pressure range
Normal atmosphere
Response time(T90)
<50S
Humidity range
Zero shift
10ppm
Stability(/Month)
<10%
Load resistance(commend)
200|
Reproducibility
<10%output value
Output linearity
Linearity
Fs1015cl gas flow sensors description
Fs1015cl mass flow sensors are specially designed for medical equipment flow monitor and control applications, and are made with world leading proprietary mems mass flow designed channel with a low pressure loss. The current models can be readily applied to ventilators and anesthesia equipments. These sensors can also be sterilized in medical liquids for reuse or hygienic purposes.
Fs1015 series can measure a flow up to 150 slpm. Iso-15mm connection model is readily applicable to ventilators and/or anesthesia equipments.
Fs1015cl gas flow sensors features and applications
- mems thermal mass flow sensor
- excellent rangeability with integrated multiple sensing elements
- high stability at null and full scale
- fast response
- low power consumption
- low pressure loss
Misir is a low power (20mw4), high performance co2 sensor. Based on gss patented solid state ir sensor technology and innovative optical designs, misir is configured to meet the requirements of the hvac and demand led ventilation markets.
Low power 20mw
Measurement ranges from 0 to 1%
Low noise measurement
