DETAILS
Model Number: 8016
Product Name: Low Cut Suede Leather Safety Shoes
Brand Name: Anboot
Sole: Rubber/PU
Upper: Suede Cowhide
Place of Origin: Guangzhou, China
Toecap: Steel/Composite
Midsole: Steel/Kevlar
Insole: Soft Impact Foam Damping
FEATURES
Low Ankle Secret Recipe Glue Upgrade Comfortable Wear-resistant.
Steel Toe protects against impact or compression (EN ISO 20345:2011).
Tested best-in-class traction with Anti- perforation, slip-resistant and oil resistant.
Electrical Hazard Protection rated to protect against open circuits up to 6000 volts in dry cond.
Flexible out sole ergonomically bends and move with the foot.
Soft neoprene lining prevents rashes and discomfort caused by friction.
Anboot Footwearâ??s foot bed provides all-day comfort with cushion, shock absorption and energy return.
Stabilizing, slip resistant outsole handles uneven terrain.
Available in steel toe and soft toe.
Available in whole sizes only â?? check the size chart for unisex sizing.
Product Description
Chest Flat Work Ironer is another newly developed chest ironer being added into our product line recently.
It has fixed roller and elevating chest. Rollers are fitted with imported spiral spring cushion support and felt padding is being
tightly wrapped round the entire roller surface.
The patented elevating mechanism of the chest unit allows even ironing pressure to be applied throughout the whole usable ironing surface and width of the chest, resulting in good flat ironing work.
Only imported high-quality VFD controller is being chosen and incorporated into the control system. It allows reliable continuous smooth ironing speed adjustment.
Utilises differential front and rear roller speed principle to give a "straightening pull effect" to the fabric during ironing so that
good flat work results can be obtained.
Well-polished chest surface finishing with large heating area to allow fast heat-up.
Fully enclosed humidity control system improves working environment and physical look of the flat work ironer.
Adjustable ironing pressure to suit different type of flat work items.
High quality steam trap system which enhances heating efficiency resulting in higher output with lower operating cost.
Different ironer capacities are available for selection. VIZ: Roller diameter ranging from 1000-800 and 500mm. Ironing width ranges from 2500mm to 3300mm. number of roller range from 1 to 2.
TANK TO TANK & TANK TO VESSEL
COMMODITY: EN 590 10 PPM
TRIAL QTY: 100,000 MT OR 200,000 MT (Up to Buyer's requirement)
CONTRACT QTY: 400,000 METRIC TONS ROLLS & EXTENSIONS
PRICE: $520/$530 PER MT
DELIVERY: FOB, ROTTERDAM, NETHERLANDS AND HOUSTON
PAYMENT: SBLC/MT103
1. Buyer issues ICPO in line with Sellerâ??s procedure and Tank Storage Agreement (TSA) / Charter Party Agreement (CPA) as proof of storage Tank or Storage Vessel availability or Buyer extends Sellerâ??s tanks.
2. Seller reviews Buyerâ??s ICPO/TSA/CPA and if accepted, Seller issuesâ??
a) Commercial Invoice;
b) Commitment Letter to Supply;
c) Statement of Product Availability;
d) Product Passport (Q&Q report) of the product in Tanks at the
port;
e) Buyer and Buyerâ??s Logistics sign the Commercial Invoice or Buyer extends Sellerâ??s tanks.
3. Upon receipt of the endorsed Commercial Invoice, Seller issues the below PPOP documents:
a) Unconditional Dip Test Authorization (D.T.A);
b) Fresh SGS Report (Not older than 72 hours);
c) Loading Port Injection Report (P.I.R);
d) Certificate of Origin;
e) Tank Storage Receipt (TSR);
f) ATSC.
4. Upon successful verification of the Full POP documents, Buyer orders His/her SGS/Intertek or its equivalent team to conduct Dip Test on the product in Sellerâ??s tank at Buyerâ??s expense.
5. Following the completion of the Dip Test, Buyer provides His/her storage receipt (TSR) / (Q88 to Seller, injection commences into Buyerâ??s leased storage tanks or vessel and upon completion of
injection, issues to Buyer FULL Injection Report.
6. Seller issues and endorses NCNDA/IMFPA duly signed by all Parties and Buyer makes 100% payment by MT103 TT wire transfer for the total product and Seller pays commission to all intermediaries involved in the transaction within 24 hours upon confirmation of Buyer's payment.
7. Seller issues Draft Sales Purchase Agreement (SPA) to buyer to review for R&E monthly deliveries (Optional).
8. Buyer reviews and approves the SPA and issues SBLC/IRDLC irrevocable, non-transferable, auto revolving for 12 monthly shipment value documentary letter of credit for length of contract and for each lift per schedule. Buyer pays after dip test by MT103 Wire transfer on each monthly quantity.
9. The subsequent delivery shall commence according to the terms and conditions of the contract.
Please note that no third party Tank Storage Accounts will be accepted the account must be in the name of the contractual party OR if the TSA/CPA is in a third party name we require the Joint Venture Agreement between the parties for acceptance. We need Approval from third-party Storage facilitator, whether it is a vessel (CPA) or a tank (TSA).
We trust the above is in order.
Procedure :
- Send LOI to Stoix Trading FZCO to initiate the process and we will send you our SCO.
1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity
3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter signed copies of the C.I
4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: -
A. Fresh SGS Report (Not older than 72 hours);
B. Product Reservoir Receipt;
C. Accreditation Certificate;
D. Product Passport (Quantity and Quality Analysis);
E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR);
G. NCNDA/IMFPA (To be completed by all intermediaries);
H. Certificate of Product Origin;
Authority to Verify (ATV) either physically or otherwise.
5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or
INTERTEK) and the needed test are carried out on the product in seller's tanks;
6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately.
7. Seller issues a contract for buyer's desired duration upon successful completion of the trial order.
JET FUEL A1 - KAZAKH ORIGIN - FOB ROTTERDAM on DIP and PAY payment terms
Initiate the buy process by sending us your LOI upon which we will share our SCO.
Following procedure:
1 Buyer sends ICPO in line with seller working procedures alongside his/her Tank Storage Agreement (T.S.A.) on receipt and acceptance of Seller's Soft Offer
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller within its validity
3. Upon receipt and review of the signed C.I., seller issues Dip Test Authorization (D.T.A) to be completed and signed by buyer/ Buyer's logistics in order for Dip Test to be conducted alongside counter-signed copies of the C.I
4. Buyer returns the Dip Test Authorization (DTA) fully completed and signed within its validity and upon successful review of the completed DTA, seller issues the below full POP documents: -
A. Fresh SGS Report (Not older than 72 hours);
B. Product Reservoir Receipt;
C. Accreditation Certificate;
D. Product Passport (Quantity and Quality Analysis);
E. Authorization to Sell and Collect Certificate (ATSCC); F. Pre-Injection Report (PIR);
G. NCNDA/IMFPA (To be completed by all intermediaries);
H. Certificate of Product Origin;
Authority to Verify (ATV) either physically or otherwise.
5. Upon receipt and confirmation of the above POP Documents, Buyer provides its testing officials (SGS or
INTERTEK) and the needed test are carried out on the product in seller's tanks;
6. Buyer upon successful Dip Test makes full payment by MT103 / TT wire transfer for the total product and Seller pays commission according to NCNDA/IMFPA to all intermediaries involved in the transaction within 24 hours after confirmation of buyer's payment and injection commences immediately.
7. Seller issues a contract for buyer's desired duration upon successful completion of the trial order.
697 Perforated Line Envelope Invoice Enclosed Suppliers
Short on time? Let Perforated Line Envelope Invoice Enclosed sellers contact you.
IV Dressing
Product Code: Box of 50; Carton of 1000.
Size/Strength: Box of 50; Carton of 1000.
Description
IV Dressing that consists of micro porous non-woven fabric (Polyethylene film), medical hypo-allergenic adhesive and absorbent pads. These are mainly used to fix vein bleeding and all kinds of cannulae and infusion lines. Made form high quality woven cloth with mesh these IV dressing and cannula fixation dressing make skin breathe properly and naturally, excreting water and air thus reducing the chances of infection. Total liberty of movements and improved conformance allowed due to gentle and thinner material for improved conformance. Reliable fixation enabled because of Hypoallergenic and proper viscidity characteristics and no viscosity of the absorbent pad with perforated polyethylene film, high absorbent, power, can absorb the effusion and it is power, can absorb the effusion and it is treated on the surface to avoid sticking on the wound. Monitoring allowed without the removal of the IV dressing or IV transparent dressing due to transparent film leading the insertion site under the center of dressing. The IV dressing is softly pressed around the insertion site and then the PE protective film from PU film layer is released. It is individually packed in peel pouches and is E.O gas sterilized.
Diesel Gas D2 Oil Gost 305-82
Minimum Quantity: 5000 Metric Tons per Month Maximum Quantity: 50,000 Metric Tons per Month
CIF Price: Gross USD $400.00MT NET / USD $390.00MT on CIF FOB Price: Gross USD $390.00MT NET / USD $380.00MT on FOB
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Mazut M100 GOST -10585/75/99
Minimum Quantity: 5000 Metric Tons per Month Maximum Quantity: 50,000 Metric Tons per Month
CIF Price: Gross USD $250.00/ USD $240.00 NET on CIF FOB Price: Gross USD $240.00 / USD $230.00 NET on FOB
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Maximum Quantity: 2,000,000 Barrels per Month
CIF Price: Gross USD $88.00BBL NET/ USD $86.00 NET on CIF FOB Price: Gross USD $ 86.00BBL NET / USD $84.00 NET on FOB
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Minimum Quantity: 400,000,000 Gallons per Month Maximum Quantity: 800,000,000 Gallons per Month CIF Price: Gross USD $ 0.86 / USD $ 0.84 NET on CIF FOB Price: Gross USD $ 0.84 / USD $0.82 NET on FOB
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Maximum Quantity: 2,000,000 Barrels per Month CIF Price: Gross USD $64.00 / USD $62.00 NET on CIF
FOB Price: Gross USD $62.00 / USD $60.00 NET on
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
UREA 46% PRILLED & GRANULAR
Maximum Quantity: 50,000 Metric Tons per Month
CIF Price: Gross USD $326.00 / NET USD $320.00 on CIF
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Maximum Quantity: 50,000 metric tons per
month CIF Price: Gross USD $296 /NET USD
$290 on CIF
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
JET A1 FUEL
Maximum Quantity: 2,000,000 Barrels per Month
CIF Price: Gross USD $88.00BBL NET/ USD $86.00 NET on
CIF FOB Price: Gross USD $ 86.00BBL NET / USD $84.00
NET on FOB
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
PETROLEUM COKE
Maximum Quantity: 50,000MT per Month
CIF Price: USD $200.00MT/USD $190.00 NET on CIF
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
LIQUFIED PETROLEUM GAS (LPG)
Minimum Quantity: 5000 metric tons
CIF price: GROSS USD $440.00 MT NET: USD $430.00
MT LIQUFIED NATURAL GAS (LNG)
Minimum Quantity: 5000 metric tons
CIF price: GROSS USD $440.00 MT NET: USD $430.00 MT
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
LIGHT CYCLE OIL (LCO)
Minimum Quantity: 5000 MT per Month
CIF Price: USD $400.00MT/USD $390.00 NET on CIF
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA
FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
697 Perforated Line Envelope Invoice Enclosed Suppliers
Short on time? Let Perforated Line Envelope Invoice Enclosed sellers contact you.
