The Probe Range of zirconium dioxide oxygen sensors are available in three lengths. Suitable for aggressive and polluted applications such as boiler exhausts. Longer probes are an ideal solution for thicker walled, insulated flue pipes.
FEATURES
* Zirconium dioxide (ZrO2) sensing elements
* Long life, non-depleting technology
* Integral heating element
* High accuracy
* Requires an external interface board to operate
BENEFITS
* No reference gas required
* No need for temperature stabilisation
* Compact enclosure
OUTPUT VALUES
Oxygen pressure range 2mbar ~ 3bar max
Accuracy 5mbar max
Internal operational temperature 700'C
Response time (10 - 90% step)
Standard response sensor < 15s
Fast response sensor < 4s
Warm up time (prior to sensor operation) 60s
Warm up time (from standby) 20s
Output stabilisation time ~ 180s
FEATURES
* Zirconium dioxide (ZrO2) sensing elements
* Long life, non-depleting technology
* Integral heating element
* High accuracy
* Requires an external interface board to operate
BENEFITS
* No reference gas required
* No need for temperature stabilisation
* Two lengths available; 220mm and 400mm
TECHNICAL SPECIFICATIONS
Heater voltage
Operating 4V DC ± 0.1V DC (1.7A)
Standby 1.65V DC (0.7A)
Pump impedance at 700'C < 6kohm
Permissible gas temperature
Standard temperature -100'C to +250'C
High temperature -100'C to +400'C
Gas flow rate 0 - 10 m/s
Repetitive permissible acceleration 5g
Incidental permissible acceleration 30g
OUTPUT VALUES
Oxygen pressure range 2mbar - 3bar max
Accuracy 5 mbar max
Internal operational temperature 700'C
Response time (10 - 90% step) < 15s
Warm up time (prior to sensor operation) 100s
Warm up time (from stand by) 20s
Output stabilisation time ~ 180s
FEATURES
* Oxygen pressure range 2 mbar - 3bar
* Zirconium dioxide (ZrO2 ) sensing elements
* Non-consumption technology
* Integral heating element
* No need for temperature stabilisation
* No reference gas required
* High accuracy
* Linear output signal
* Operates with external interface boards
SPECIFICATIONS
Heater Voltage
Porous Cap (15mm) 4.35V DC ± 0.1V DC (1.85A)
Stand by 2V DC (0.85A)
Pump resistance @ 700'C < 6kâ?¦
Permissible gas temperature -100 to 250'C
Gas flow rate 0 to 10 m/s
Repetitive permissible acceleration 5 g
Incidental permissible acceleration 30 g
Portable Gas Detectors can detect VOC, Toxic, Combustible & Oxygen types of gases which are used for personal safety. Portable Gas Detection System will detect the concentration of gases in confined spaces, sewer manholes, wastewater treatment plants, pharmaceutical industries, fertilizer industry, and many other applications with the display of gas concentration on the LCD. Portable Gas Monitors are a must for people entering hazardous areas.
These detectors have the feature of secure handling and programming with three keys and power supply with rechargeable batteries. They have a password-protected function menu, plug-in sensor, and built-in audio buzzer. These Portable Gas Detectors also have optional data logging facilities with 50000 records, which are visible in ASCII format while downloading to PC via USB interface.
Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2 ) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards
* pcb mountable
Specifications
Heater supply*
Porous lid cap 4vdc +/- 0.1vdc (1.7a)
Stand by 1.65vdc (0.7a)
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2v dc (0.85a)
5618 Oxygen Sensor For Portable Gas Detector O2 A2 Suppliers
Short on time? Let Oxygen Sensor For Portable Gas Detector O2 A2 sellers contact you.
Features
* oxygen pressure range 2 mbar - 3bar
* zirconium dioxide (zro2 ) sensing elements
* non-consumption technology
* integral heating element
* no need for temperature stabilisation
* no reference gas required
* high accuracy
* linear output signal
* operates with external interface boards
* 80mm, 220mm and 400mm probes available
Specifications
Heater supply*
Porous lid cap 4v dc +/- 0.1v dc (1.7a)
Stand by 1.65v dc (0.7a)
Full porous cap 4.35v dc +/- 0.1v dc (1.85a)
Stand by 2v dc (0.85a)
D G EXIM is well positioned in the water treatment business and technically geared to tailor-make solutions to any water treatment requirements. Every situation is analyzed based on the elements present and a unique solution is offered. We supply chemicals for Boiler Treatment, Cooling Tower and Portable Water Treatment as well AS Effluent Treatment. Below you will find some of the water treatment chemicals we supply
Activated alumina is a versatile material with a wide range of applications. Here are some additional details:
## Production Process
1. Bauxite mining: Activated alumina is typically produced from bauxite, a type of rock that contains aluminum hydroxide.
2. Refining: The bauxite is refined to produce alumina (Al2O3).
3. Activation: The alumina is then activated through a process of heating and treating to increase its surface area and adsorption capacity.
## Properties
1. Surface area: Activated alumina has a high surface area, typically ranging from 200-400 m2/g.
2. Pore size: The pore size of activated alumina can vary depending on the application.
3. Chemical stability: Activated alumina is chemically stable and resistant to corrosion.
4. Thermal stability: Activated alumina is thermally stable and can withstand high temperatures.
## Applications
1. Air purification: Activated alumina is used in air purification systems to remove impurities and contaminants.
2. Water treatment: Activated alumina is used in water treatment systems to remove impurities and contaminants.
3. Gas separation: Activated alumina is used in gas separation applications, including the separation of oxygen and nitrogen.
4. Catalysis: Activated alumina is used as a catalyst or catalyst support in various chemical reactions.
## Benefits
1. High efficiency: Activated alumina is highly efficient in removing impurities and contaminants.
2. Long lifespan: Activated alumina has a long lifespan and can be reused multiple times.
3. Low maintenance: Activated alumina requires low maintenance and can be easily cleaned and regenerated.
4. Cost-effective: Activated alumina is a cost-effective solution for various applications.
## Industries
1. Chemical industry: Activated alumina is used in the chemical industry for various applications, including catalysis and adsorption.
2. Petroleum industry: Activated alumina is used in the petroleum industry for various applications, including gas separation and drying.
3. Pharmaceutical industry: Activated alumina is used in the pharmaceutical industry for various applications, including purification and filtration.
4. Water treatment industry: Activated alumina is used in the water treatment industry for various applications, including adsorption and filtration.
Built upon a legacy of reliable, field-proven concentrator models, the DeVilbiss 5 Liter Oxygen Concentrator was designed
with enhanced quality, durability and simplicity in mind
Patented DeVilbiss Turn-Down Technology minimizes wear on internal components, reduces power consumption by 15% or more and extends the life of the concentrator
Exclusive DeVilbiss OSD (Oxygen Sensing Device), standard on every unit, ensures patient safety and reliability for longer
service intervals
Readily accessible patient controls, protected cannula fitting and recessed humidifier nook to prevent damage
Alarms Audible and visual high/low pressure, low flow, low oxygen, power fail, Oxygen Sensing Device
Sold separately, the Transfill Caddy is designed with a steel frame to simply connect the 18 x 14 inch shelf, designed to
support up to 40 lbs, to the DeVilbiss 5L Concentrator. Rear view (Figure A), Front View (Figure B)
FOB term
40ft container base deal
5L Model: OCT-050
450 units per 40 ft container
10L Model: OCT-100
495 units per 40 ft container
medical use, single flow with nebulizer and low oxygen purity alarm, oximeter
Purify: 93% +/- 3%
Outlet pressure (Mpa): 0.04-0.07
Sound level: <=50db
AC220V, 50-60 Hz
AC110V, 50-60 Hz
LCD display
Power failure alarm
High / Low Pressure alarm
Taiwan Brand, Taiwan company, OEM made in China
China brand oxygen concentrator 5L ready stock
MOQ: 1000 units
CIF US$700/unit NO commission
could markup
1/3 seller
1/3 buyer mandate and their team
1/3 all intermediates
SOP:
- NCNDA, LOI, IMFPA
- SPA
- Payment
- Shipment released
Flow Rang: 0.5-5L/min
Oxygen Concentration:95.5%-87%
Maximum Outlet Pressure: 40-70kPa
Sound level: 48dB(A)
Input Power: 400VA
Minimum Operating Time: 30 mins
FDA CE
* Filled with pure Nitrous Oxide N2O
* 580g of Nitrous oxide (E942 food grade)
* Each cylinder is individually weighed electronically with filling weight
* Produced with high graded recyclable rustproof cast iron
* 580g of Nitrous oxide (E942 food grade)
* Fully disposable and recyclable
* Meets all European laws and regulations
* Pressure tested at 165 bar
* Only use approved cream dispensers (30 bar)
PSA (Press Swing Adsorption) Methodology to Deliver Oxygen without any
Consumables but Electrical Power.
* Delivers a 93%+/-3% Purity Oxygen at the Flow of 10 LPM (liters per minute)
* Goes with a built-in nebulizer.
* Goes with dual outlets, enabled to work as two oxygen concentrator 0-5 LPM at the same time, or work as one oxygen concentrator 0-10 LPM.
* Power Consumption: 750W
* Oxygen Output pressure: 0.05MPA
* Sound Level: 46 dBA
* Dimension: 325*350*670mm
* Weight : 32KGS
* Transportation/Storage Humidity: 80% RH
* Transportation /Storage Temperature: -20-60
* Shipping Measurement : 490x440x760mm
* Capacity : 10 Ltr
3000 Cylinders available in stock
Manufacturing standard : ISO 9809-1 2010 & TPED
Manufacturing date is 2020 / 2021.
Volume: 50 Litre
Working Pressure : 150 Bar
Test Pressure: 250 Bar
Outside Diameter: 232 mm
Min Wall Thickness: 5.3 mm
Length: 1435 +/-15mm
Thread : 1 *14BS
Material: 37 MN Steel
Color : Black Body, White shoulder
Valve: BS female outlet with out handwheel
Price : USD 185 FOB.
