HIMA F7115 good price meet your needs and buget HIMA F7115 in stock
Email me your inquiry,I'll offer you the most competitive price!
We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famouse PLC DCS product maintenance service providers in the world.
A dental machine CRAFT 5X used in the field of dentistry to perform a variety of tasks related to patient care, treatment, and diagnostics. These machines are essential in modern dental practices, providing precision, efficiency, and safety in various procedures.
Specifications
- Size(mm)- Machines : 440 mm x 660 mm x 710 mm (WXDXH), Table : 436 mm x 660 mm x 1000 mm (WxDXH)
- Weight - Machines: 75 kg, Table: 70 kg
- Spindle- Manufacturer: J ger, Shank: 4, Maximum RPM: 100,000 rpm, maximum output: 0.7 kw
- Toolport Count: 15
- Simultaneous machining quantity:10
- Reverse Processing Quantity: 6
- electric power: 1.5kw
- JIG & Material: Zirconia, Wax, PMMA, PEEK, Composite resin, Hybrid ceramic, Glass ceramic, Pre-milled titanium abutment
A dental machine PM5 used in the field of dentistry to perform a variety of tasks related to patient care, treatment, and diagnostics. These machines are essential in modern dental practices, providing precision, efficiency, and safety in various procedures.
Specifications:
Size (mm)(Width X Height X Depth) : M/C 600 x 680 x 640 Addition 600 x 760 x 640 (Total 600 x 1560 x 640)
Axis: 5-Axis
Manufacturable Material : Metal / Zirconia / PMMA / WAX / Glass Ceramic / Abutment / ETC
Spindle : 1.8 ~ 2.7 kw / 60,000 RPM Air Cooling
Accuracy: ± 1
Endmill: Metal 0.5 / 1.0 / 1.5 / 2.0 / 3.0, Zirconia 0.3 / 0.5 / 1.0 / 2.0, Glass Ceramic 0.6 / 1.0 / 2.0, PMMA 0.5 / 1.0 / 2.0
Inside System : Coolant + Air Suction
Jig & Material : Disk Cr-Co, Ni Co, Soft Metal, Glass Ceramic, Zirconia, Wax, PMMA, etc, Cube Glass Ceramic, Abutment Titanium
A dental machine BX4 used in the field of dentistry to perform a variety of tasks related to patient care, treatment, and diagnostics. These machines are essential in modern dental practices, providing precision, efficiency, and safety in various procedures.
Specifications:
- Dimensions(W*D*H) : 481*529*823.5mm
- Weight : 75 kg
- Number of axes : 4 axes
- Type of drive : High Torque Step Motor
- Guide and screw : X axis : LM guide and ball screw, Y axis : LM guide and two ball screws, Z axis : LM guide and ball screw
- Moving Range : X axis : 178mm, Y axis : 185mm, Z axis : 88mm, A axis : 360(Free rotation)
- Spindle : 500W High frequency
- Coolant tank capacity : 8 liter
- Cover/Door : Hood hinged to open downwards
- Required air pressure : 5.5-8 (continuously applied) bar
- Required air volume : 50~80 L/min
- Operation temperature : 20~35
4444 F8623B Hima Safety Related Output Module Suppliers
Short on time? Let F8623B Hima Safety Related Output Module sellers contact you.
Product Attributes
- Brand Name UREA
- Model Number 1122445
- Place of Origin South Africa
- Supply Type In-Stock Items
- Condition New
- Color White
- CAS No. 57136
- Coating Granular
- Purity 99
- Related Keywords Urea, Fertilizer
Description by Manufacturer
High-analysis nitrogen mineral fertilizer
Fully water-soluble
Suitable for irrigation systems
Especially e�ective for rice and melon cultivation
Can be used as a foliar fertilizer
Quality specification:
FREE -FLOWING AT TIME OF LOADING, FREE FROM HARMFUL SUBSTANCES
MASS FRACTION OF NITROGEN, MIN (%) 46,0
MASS FRACTION OF BIURET, MAX (%) 1,0
MASS FRACTION OF WATER (FISCHERâ??S METHOD), MAX (%) 0,5
GRANULES 1-4 MM, MIN (%) 90
FRIABILITY (%) 100%
SAFETY NON-HAZARDOUS
ANTI-CAKING TREATMENT:
FLOTIGAM / NOVOFLOW OR SIMILAR: 0.03-0.06 % AND/OR
UF RESIN, % : 0.3-0.5
PACKAGING, TRANSPORTATION, AND STORAGE:
Treated with conditioning agents to preserve its properties
Shipped in bulk pre-packaged in big bags or in covered self-unloading hoppers
Transported by any means of transportation in accordance with applicable cargo transportation rules
Bulk urea is also transported in covered decked sea vessels or in specially equipped road vehicles with the cargo covered in the body. Specialized flexible universal urea containers may be transported by road without any cover.
Stored indoors in well-ventilated warehouses to protect it from weather exposure.
Urea containers and bags may be stored outdoors. In the case of bulk storage, urea must not mix with any other fertilizers.
Certificates
- CCC 310210
- CE 310210
- FCC 310210
- TUV 310210
- UL 310210
- FDA 310210
Price
Price US$ 300 / Metric Ton
Packaging & Shipping
- Packing 50kg bags or 1000kg bags
- Packaging Size 50 x 30 x 50 ( Centimeters)
- Package Weight 50 ( Kilograms )
- Delivery Lead Time 7 days
- Minimum Order 300 Metric Ton
- Supply Ability 10000
- Total quantity in Stock Over 5000
- Delivery Port Durban
- HS Code 310210
- Shipping Career MSC
The battery is a new type of energy storage product, which can be used to provide reliable power supply for various equipment and systems.
It is especially suitable for applications with large power, limited installation space, limited bearing capacity and long life.Battery built-in bms battery management system, battery voltage, current, temperature and other information management and monitoring.
In addition, the battery pack can balance the charge and discharge of the battery to prolong the cycle life. Multiple battery packs can be parallel to expand capacity and power, parallel to expand capacity and longer power support time requirements.
1.Environmental protection and pollution-free: the whole module using materials are non-toxic, pollution-free;
2.long safety life: the core cathode material of battery module is made of LiFeOP4, good safety performance and long service life;
3.Protection function: battery management system can protect battery module over discharge, over charge, over current and high / low temperature;
4.Equilibrium function: the battery management system has its own passive equalization, can balance the battery module each single string core;
5.Expansion: flexible configuration, multiple battery modules can be parallel expansion capacity, applicable to different standby time requirements;
6.Low power consumption: the battery has the function of automatic dormancy, when no live equipment is connected, it can enter the low power state by itself and reduce the self-loss;
7.No memory: no memory effect, shallow charge and discharge performance is excellent;
8.Wide temperature range: working temperature range-20~70, charge 0~60, discharge-20~70, good discharge performance and cycle life,
Built in BMS overall protection
1.Over charged protection
2.Over discharged protection
3.Thermal protection
4.Over current protection
5.Cell balancing
Product Description
We produce VRLA/SLA Battery, lead battery, Industrial Battery, 12V/ 6V Battery, Rechargeable Battery, Gel Battery, Deep Cycle Battery, sealed lead acid battery and so on.
12v 7ah backup battery (20hr battery)
Valve regulated lead acid series UPS batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications widely used in the field of UPS, Emergency Lighting System.
Battery Structure
1. Container/Cover: Made of UL94HB and LU 94V-0 ABS Plastic
2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing.
3. Separator: Import high quality AGM separator.
4. Postive Plates: PbCa grids minimize corrosion and prolong life.
5. Terminal post: Cooper material with maximum conductivity, enhance the high current rapidly.
6. Vent Valve: Allows the release of excess gas automatically for safety.
Power Supply 12V 7ah UPS Backup Battery (20hr battery)
Basic Info.
Model NO.
PTD250-12
Installation
Packaged
Rechargeable
Chargeable
Weight (Kg)
68kg
Color
Black/Ivory White
Terminal Type
Lead / Bolt & Nut
Safety
Explosion-Proof
Battery Case
ABS
Separator
AGM
Sealed Type
Sealed
Transport Package
Carton / Wooden Case / Pallet
Specification
520x268x243 mm
Trademark
PUSTUN
Origin
Guangzhou, China
HS Code
8507200000
Production Capacity
600PCS/Day
Product Description
We produce VRLA/SLA Battery, Industrial Battery, 2V/6V/12V Batteries, Rechargeable Battery, Gel Battery, Deep Cycle Battery, sealed lead acid battery and so on.
Valve regulated lead acid deep cycle series batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications.
Advanced Features:
1. Environmentally friendly
2. Completely Maintenance-Free
3. Non-Spillable construction design.
4. Wide Operating Temperature Range(-20�°C~+60�°C)
5. Long Life (12-15 years designed life)
6. Explosion Proof
7. Valve Regulated & High Discharge Rate Capability
8. Low Self Discharge
9. Independent of Position
10. Ease of Shipment
11. No need of balanced charge or boost
Supplier From
Honiara,
Guadalcanal,
Solomon Islands
Sawn Timber, Clothing for Men and Boys, Clothing for Women & Girls, Tropical timber furnitures, Dining furnitures, Living room furnitures.Petroleum Engineering services, Risk management, Safety Training modules, Organize logistics in the Solomon Islands and Pacific Region.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Product Features:
1. Standardized components, modular architecture, easy for expansion
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH-500KWH optional
5. The use of international advanced Mitsubishi IPM module and intelligent power module, with high power fast adjustment capability
6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management
7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform
9. PV charge controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of PV modules and batteries
10. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Product Features:
1. Standardized components, modular architecture, easy for expansion.
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life
4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional
5. BMS battery management system with SOC automatic calibration and high current passive balancing function,
combined with the perfect operation control and management strategies to achieve accurate and efficient management
6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system.
7. Our BMS system adopts American NXP automotive grade chips with high performance.
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform.
9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Product Features:
1. Standardized components, modular architecture, easy for expansion.
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life
4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional
5. BMS battery management system with SOC automatic calibration and high current passive balancing function,
combined with the perfect operation control and management strategies to achieve accurate and efficient management
6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system.
7. Our BMS system adopts American NXP automotive grade chips with high performance.
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform.
9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Product Features:
1. Standardized components, modular architecture, easy for expansion.
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life
4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional
5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management
6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system.
7. Our BMS system adopts American NXP automotive grade chips with high performance.
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform.
9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Product Features:
1. Standardized components, modular architecture, easy for expansion.
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life
4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional
5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management
6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system.
7. Our BMS system adopts American NXP automotive grade chips with high performance.
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform.
9. Colorful LCD display all module working information and status.
4444 F8623B Hima Safety Related Output Module Suppliers
Short on time? Let F8623B Hima Safety Related Output Module sellers contact you.
