Load moment indicator(also called as"crane computer" or "safe load indicator") can be in form of LCD dynamic graphics and comprehensive display the various parameters in the process of work. As the main hook load, auxiliary hook load,boom Angle, length, working radius, etc.;
Alarm function
Sound and light alarm function: when the crane boom work amplitude limit close to work, when lifting load and torque device close to the permitted load limit, torque system issued a warning of slow beeping sound. Warning lights flashing slowly torque system.
When jib frame work scope to work limit, when the lifting load and torque reaches equipment when the permitted load limit moment send urgent alarm beeping sound. Shortness of torque system alarm indicating red light flashing.
Torque protection function
Control output function: when boom amplitude limit close to work, work when lifting load and torque device close to the permitted load limit, the system output torque control signal to stop the crane continue to continue to run in the direction of risk, allow crane moves in the direction of security.
2. Data control box
3. SHL Rope Rider three-pully load sensor
4. Boom angle-length sensor
5. GJ type A2B switch
WTL-A220 Load Moment Indicator is a new type of smart weigh overload protector, which measures the changes of the weight of the loaded goods by a preset weight sensor and displays the actual load instantly on the display instrument. When the load reaches the given point of rated load, the acousto-optic alarm of the hoisting weight limiter will be triggered, with the switching value output displayed. The whole system is composed of sensor, connecting cable, microcomputer host and so on.
The device is designed and manufactured in accordance with requirements of GB 12602-2009 Lifting Machinery Overload Protection Devices and GB / T 3811-2008 Crane Design Specification. With reasonable layout, easy installation, simple operation, WTLA220 Load Moment Indicator works well with high accuracy and other advantages
Weight Measurement Range: 0T~400T.
Resolving Ability: 0.1T.
Synthetic Errors: â?¤5%F.S.
Equipped with Output Interface RS485.
Working Condition: ï¼?20ï½?60.
Relative Moisture under Working Condition: 90%RHï¼?20ï¼?.
Working Voltage: AC220V±25%.
Preset Output Contact Capacity: AC220V 7A.
IP Grade: weight sensor with IP68; Monitor with IP64.
We have avaliable to load light naphtha as following terms and conditions.
If you have a real buyer in China or Some where else, please. advise. THE PRICE IS GOOD.
If you can give as the discharging port, we also can offer CFR
Price
Price Shall Be Expressed In Us Dollars, Per Metric Ton Of The Product Delivered Hereunder On B/l Quantity Safe Fraud Of Manifest Error, On Fob One Safe Port/one Safe Berth Marsa, Brega Basis To Be Calculated As Per The Following Price Formula:
Pricing period as : BL+3, BL=0
The Final Price Of The Goods Shall Be Determined As The Average Of Mean Quotations As Published In Platts European Marketscan For Naphtha Under The Heading Fob Med Italy During The Pricing Period Minus A Discount Of Usd 20.00 (forty Seven Point Zero Zero) Us Dollars Per Metric Ton In Air.
Payment :
By Confirmed LC
At Five (5) New York Banking Days After Completion Of Discharge At Discharge Port (cod Date Equals Day Zero)
Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity
Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process.
Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products.
Parameters
1.process arrange diameter of round shape onion 30-150mm.
2.capacity 1000-1500kg/h
3.Power 3kw
4.Voltage 380V
5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw
6.Machine size 1.5*1.3*1.4m
7.Weight 420kg
Start working flowing:
1.Fill onion in the loading box
2.Start the pneumatic valve switch
3.Start the power-supply switch
4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin
5.When finished adjusting ,The equipment operates normally and automatically.
Working temperature:
-20 --- + 60
-40 --- + 80
Working humidity: 95%/25
Combined error: 1%
Power supply: ac220v (to be customized according to clients requirement)
Parameter:
Rated load, actual load, trolley amplitude, hook height and moment percentage
Signal lamp&buzzer:
Flickering yellow lamp and buzzers discontinuous response indicates early warning, whereas red lamp and buzzers continuous indicates alarm and relay outputs.
Other functions:
Records downloading; sensors self-diagnostic; applicable to tower crane with standard fall
Remarks: cxt/20p-i is a basic model while cxt/20p-ir add the function of slewing indication and cxt/20p-if adds the function of anemometer.
WTAU brand WTL-A700 LMI system
it's a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
The Safe load indicator (SLI) has been designed to provide safety of the crane operation, with a continuous display
of all the essential information needed to enable the crane to be used within its design parameters.
SLIs have sensors to measure Load, Angle (from horizontal 0 to vertical 90 degree) & boom length. It has a 8
inch color touched LCD display for clear visibility, Overload alarm /Cut-off system, LED for overload, over hoist & Bypass on unsafe condition.
WTAU WTL-A700 lmi function:
load moment indication systems (LMI) help to prevent the operator from lifting excessive loads what could cause equipment collapse or tip over.
Loads calculated by the LMI are verified against load charts. If a load exceeds the limit indicated in the chart, safety-related functions are activated and a cut-off is triggered.
Anytime a load is lifted, the potential for overload is present. Accurate measurement of the load is critical to preventing dangerous overloads.
WTAU brand WTL-A700 LMI system
it's a kind of Crane safety protection device , function as belows:
1)Alarm, in case of over load
2)Stop instantly in case of over load
3)Show Live Weight while in operation
4)Prevent overload
5)Crane Movement Control
6)Allows user to collect data in .txt format
7)Increase crane working life and life cycle
The Safe load indicator (SLI) has been designed to provide safety of the crane operation, with a continuous display
of all the essential information needed to enable the crane to be used within its design parameters.
SLIs have sensors to measure Load, Angle (from horizontal 0 to vertical 90 degree) & boom length. It has a 8
inch color touched LCD display for clear visibility, Overload alarm /Cut-off system, LED for overload, over hoist & Bypass on unsafe condition.
WTAU WTL-A700 lmi function:
load moment indication systems (LMI) help to prevent the operator from lifting excessive loads what could cause equipment collapse or tip over.
Loads calculated by the LMI are verified against load charts. If a load exceeds the limit indicated in the chart, safety-related functions are activated and a cut-off is triggered.
Anytime a load is lifted, the potential for overload is present. Accurate measurement of the load is critical to preventing dangerous overloads.
UREA N46% is a spherical white solid. It is an organic amide molecule containing 46% nitrogen in the form of amine groups. UREA is infinitely soluble in water and is suitable for use as an agricultural and forestry fertilizer as well as for industrial applications which require a high quality nitrogen source. It is not a poison to mammals and birds and is a benign and safe chemical to handle.
Specifications:
Nitrogen 46% min
Biuret 1% max.
Moisture 0.3% max
Size 0.8~2.88mm
Terms:
FOB USD 400 / mt depending on the qty
ITLC / SBLC / TT from a major international bank
Shipments:
Average 2 weeks to first shipment, monthly after that depending on the order volume.
Inspection:
SGS/TUV/Intertek Inspection and loading supervision is available at buyer's expense
"aska crane" is mini crawler cranes with lifting capacity of 1.7t, 2.8t, 3.0t (now remodeling) and 4.9t(will be available in 2009), manufactured by our affiliate company, r&b engineering co., ltd.
In 2007 october, r&b engineering co., ltd. Was established and inherited a development and production technology from a Japanese pioneer mini crawler crane manufacture, �gtoa corporation�h.
Model list
Ntch174 - 1.7t petrol
Cr285g - 2.8t petrol
Cr285d - 2.8t diesel
5, The four motors automatically realize various positions. The motors are selected from internationally renowned brand Timotion, which are safe and noiseless.
6, Two control methods, operation handle control and guardrail built-in button operation, control handle is clear and easy to operate; built-in buttons on the side rail near headboard, graphic display, clear at a glance. The key has lock function, which reduces the probability of misoperation and locks safely.
7, Side rail:
1),Two side rail in each side of bed.
2),It can be automatically locked when raising, and each guardrail can bear more than 50KG.
3), Guardrail safety switch design, placed under the guardrail to avoid misuse of the patient;
4), Equipped with gas spring for easy operation.
5), The steel structure of the guardrail base is welded on the bed to ensure safety.
6), The 4-pieces guardrail has angle indicator that allows the caregiver to quickly and easily adjust the backrest angle and TR/ATR angle of the bed.
7),It equipped with guardrail built-in button to make it easier for the patient to operate the bed.
8, Casters
1), The four casters use 125mm center control one.
2), Steel structure, precision ball bearings are placed in the rotating head and the caster, the caster frame is equipped with a wheel cover made of synthetic material, suitable for locking the lever with a cam hole. Caster surface material: polyurethan, passed EN 12531 standard, single dynamic (force) load is not more than 175 kg, static load is not more than 200 kg
3),Braking system: Pedal-type synchronous braking arms on both sides of the bed, adopting all-metal structure, compact structure and reliable braking.
9, Shank board can be adjusted manually by simple steel support for convenience position.
10, At the 4 corners of the bed, there is an diameter HDPE anti-collision wheel which intergated on H/F board.
11, There are 1 hook in each side for drainage bag.
12, It equipped with manual CPR for emergency treatment.
